BM-05S
More agile and more fans.
Sports and sedans to enjoy running.
Axela continues to pursue a just-sized body and nimble exercise performance from the first generation. In BM-05S, in order to inherit and enhance the sporting spirit of Axela, its styling and running are further deepened.
The front bumper and grille exclusively for cars after minor changes make the neatness and strength clear, and realize a markless face without impairing the millimeter wave radar function.Furthermore, in combination with a rear spoiler dedicated to sports / sedans, the dynamic beauty of the base car is expressed sportily.
The street sports suspension kit, which plays a central role in driving, establishes unambiguous handling that is faithful to the rider's intention in combination with various body reinforcements.
Furthermore, the intake and exhaust system has been carefully set for each power unit.A brake system that pays attention to the rigidity of the entire system, aiming for deceleration that synchronizes with sensitivity.Regardless of body type, Axela is transformed into a more agile and fanatic street sport.
Styling kit
SPORT installed state
SEDAN installed state
● The photo is a sample of two-color painting.For painted parts,please use this form.Please refer to.
● The tires and wheels in the photo are examples of installation.
● The tires and wheels in the photo are examples of installation.
■ BM-05S Styling Kit For Axela (BM / BY series)
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Front bumper & grill | Car after minor change * 1 * 2 | MBM2F00 | ¥115,500 (¥ 105,000) | Bumper grill integrated FRP (grill part AES) painting required Drilling required Genuine fog lamp tow hook cannot be installed | D | 1.0 h |
| Rear roof spoiler | Sports | MBM2600 | ¥49,500 (¥ 45,000) | Made of FRP Painting required Drilling required | D | 1.0 h |
| Rear spoiler | sedan | MBM2610 | ¥49,500 (¥ 45,000) | Made of FRP Painting required Drilling required | D | 1.0 h |
※ 1 BM2FS/BM2FP-200001～、BM2AS、BM2AP、BMLFS、BMLFP、BM5FS/BM5FP/BM5AS/BM5AP-400001～、BYEFP-200001～用。
※ 2 Cannot be installed on vehicles equipped with a 360 ° view monitor.
※ 2 Cannot be installed on vehicles equipped with a 360 ° view monitor.
The product is compatible with each safety equipment such as millimeter wave radar (SBS / MRCC), but it may not operate properly depending on the weather and driving conditions as well as mass-produced vehicles.
BM-04
Front bumper and grille that realizes a markless face while maintaining the millimeter-wave radar sensor function.The dynamic beauty of the base car, such as sports / sedans and strake sets designed exclusively for each, is expressed more dynamically.Compatible with cars before minor changes.
Styling kit
SPORT (XD / 20S / 15S.C)
Front bumper & grill / side strake set / rear roof spoiler installed.
● The photo is a sample of two-color painting.For painted parts,please use this form.Please refer to.
● The tires and wheels in the photo are examples of installation.
● The tires and wheels in the photo are examples of installation.
SEDAN (HYBRID / 15S.C)
Front grille / side strake set / rear spoiler installed.
● The tires and wheels in the photo are examples of installation.
The product is compatible with each safety equipment such as millimeter wave radar (SBS / MRCC), but it may not operate properly depending on the weather and driving conditions as well as mass-produced vehicles.
■ BM-04 Styling Kit For Axela (BM / BY series)
| Product name | 適合 車 種 (Model chart) | part number | Price excluding tax | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Front bumper & grill | Car before minor change ※ 1 | MBM2E00 | ¥132,000 (¥ 120,000) | Bumper grill integrated LED daytime lamp included Millimeter wave radar (SBS / MRCC) compatible FRP made (grill part AES made) Painting required Drilling required Genuine fog lamp Tow hook cannot be installed | D | 1.3 h |
| Front grill | Car before minor change ※ 1 | MBM2510 | ¥60,500 (¥ 55,000) | For mounting genuine bumper Millimeter wave radar (SBS / MRCC) compatible FRP made (louver part AES made) Painting required | D | 0.5 h |
| Side strake set | Car before sports minor change ※ 1 sedan | MBM2300 MBM2310 | ¥71,500 (¥ 65,000) ¥71,500 (¥ 65,000) | 6-piece set configuration With metal AutoExe ornament Urethane painting required Drilling required | D | 1.0 h |
| Rear roof spoiler | Sports | MBM2600 | ¥49,500 (¥ 45,000) | Made of FRP Painting required Drilling required | D | 1.0 h |
| Rear spoiler | sedan | MBM2610 | ¥49,500 (¥ 45,000) | Made of FRP Painting required Drilling required | D | 1.0 h |
※ 1 マイナーチェンジ後車（BM2FS/BM2FP-200001～、BM5FS/BM5FP/BM5AS/BM5AP-400001～、BYEFP-200001～、BM2AS/BM2AP/BMLFS/BMLFP）に装着不可。
Functional parts
▶ Suspension Parts
"A New Driving Sensation" Suspension is at the core of sporty driving.Our aim is to handle at will beyond the framework of mass-produced vehicles.For drivers who want to enjoy driving positively, it is not just hard and soft, but it provides a street best ride with refined dynamic sensitivity performance such as initial response at the time of steering and transient characteristics of roll. >> Read more
Parts lineup Click to open ▼
■ Lowdown spring
Gives a sense of dynamism to the styling and stabilizes handling by lowering the center of gravity.The dedicated design according to the power unit ensures an appropriate amount of down and suspension stroke.The spring constant is set in consideration of the damping ratio with the damper.It is recommended to use an adjustable stabilizer link that corrects the stabilizer arm angle during lowdown.>> More details
Gives a sense of dynamism to the styling and stabilizes handling by lowering the center of gravity.The dedicated design according to the power unit ensures an appropriate amount of down and suspension stroke.The spring constant is set in consideration of the damping ratio with the damper.It is recommended to use an adjustable stabilizer link that corrects the stabilizer arm angle during lowdown.>> More details
<Main specifications> ・ Vehicle height: -20mm ・ Spring constant isplease use this form. for more information.
Wearing gallery
Wearing gallery
■ Sports damper
Although it has the same shape as the mass-produced product, the internal piston adopts a "very low speed valve" that generates precise damping force from the moment it starts moving.It accurately controls changes in the vehicle's posture and achieves a sporty, flat and high-quality ride.It is recommended to use with genuine springs (can be used with lowdown springs). >> More details
<Main specifications> ・ Fixed gas damping force
Although it has the same shape as the mass-produced product, the internal piston adopts a "very low speed valve" that generates precise damping force from the moment it starts moving.It accurately controls changes in the vehicle's posture and achieves a sporty, flat and high-quality ride.It is recommended to use with genuine springs (can be used with lowdown springs). >> More details
<Main specifications> ・ Fixed gas damping force
■ Adjustable stabilizer link
Adjustable link that corrects the deviation of the stabilizer arm angle that occurs when the vehicle height is lowered, such as installing a low down spring.The total length of the link connecting the stabilizer and the car body is adjusted to optimize the arm angle, and the original stabilizer function of the design value is restored.Set for front / rear.>> More details
Adjustable link that corrects the deviation of the stabilizer arm angle that occurs when the vehicle height is lowered, such as installing a low down spring.The total length of the link connecting the stabilizer and the car body is adjusted to optimize the arm angle, and the original stabilizer function of the design value is restored.Set for front / rear.>> More details
<Main specifications> ・ Front / rear settings ・ Full length adjustable XNUMX-piece set ・ Axial mount type
■ Sports stabilizer
The left and right suspension arms are connected by a pipe, and the spring effect suppresses the amount of roll.Controllability during cornering is maintained by increasing the spring constant appropriately.It is especially effective when increasing the size of tires to high grip tires.Set for front / rear.>> More details
The left and right suspension arms are connected by a pipe, and the spring effect suppresses the amount of roll.Controllability during cornering is maintained by increasing the spring constant appropriately.It is especially effective when increasing the size of tires to high grip tires.Set for front / rear.>> More details
<Main specifications> ・ Front / rear settings ・ Front: solid Φ22 ・ Rear: solid Φ18 ~ 20
| Product name | 適合 車 種 (Model list) | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Lowdown spring (BM series diesel vehicle) | BM2FS / BM2FP ※ 1 BMLFS ※ 1 BMLFP ※ 1 | MBM7000 MBM7300 MBM7500 | ¥41,800 (¥ 38,000) ¥44,000 (¥ 40,000) ¥45,100 (¥ 41,000) | Vehicle height-20mm Spring constant: Fr: 31.9 Rr: 33.3N / mm Vehicle height-20mm Spring constant: Fr: 27.9 Rr: 33.3N / mm Vehicle height-20mm Spring constant: Fr: 27.9 Rr: 33.3N / mm | D | 2.5 h | |
| Lowdown spring (BM series gasoline car) | BMEFS BM5FS / BM5FP ※ 1 | MBM7100 MBM7200 | sold out. ¥41,800 (¥ 38,000) | Vehicle height-20mm Spring constant: Fr: 29.4 Rr: 33.3N / mm Vehicle height-20mm Spring constant: Fr: 25.7 Rr: 33.3N / mm | D | 2.5 h | |
| Sports damper | 2WD car | MBM7700 | ¥77,000 (¥ 70,000) | Compatible with fixed damping force mass production springs / AutoExe springs | D | 2.5 h | |
| Adjustable stabilizer link | front rear | All cars ※ 2 All cars | MKE7605 MKE7655 | ¥24,200 (¥ 22,000) ¥22,000 (¥ 20,000) | Full length adjustable left and right set of 2 | D | 0.5 h |
| Sports stabilizer | front | All cars | MBM7600 | ¥30,800 (¥ 28,000) | Solid φ22.0 Spring constant (compared to mass-produced vehicles) 120% | D | 2.5 h |
| Sports stabilizer | rear | 2WD vehicles (excluding BYEFP--199999) BYEFP-~ 199999 BM2AS / BM2AP | MBM7650 MKE7650 MKE7660 | ¥28,600 (¥ 26,000) | Solid φ18.0 Spring constant (compared to mass-produced vehicles) 120% Solid φ19.0 Spring constant (compared to mass-produced vehicles) 114% Solid φ20.0 Spring constant (compared to mass-produced vehicles) 116% | D | 2.0 h |
※ 1 When installed in a car with a 360 ° view monitor, it may be necessary to adjust the aiming of the camera.
※ 2 When installing the Street Sports Suspension Kit (MBM7850A), it is not necessary to install the same product due to its functionality.
※ 2 When installing the Street Sports Suspension Kit (MBM7850A), it is not necessary to install the same product due to its functionality.
▶Body Parts
In order to enhance the sense of unity between the driver and the car, tuning to train the body is the basis.By suppressing slight distortion of each part of the body due to input from the road surface such as during cornering, the movement of the suspension initial operating area absorbed by the distortion is drawn out, and handling with a direct feeling without delay of reaction from the moment when the steering is started Contribute to. >> Read more
Parts lineup Click to open ▼
■ Strut tower bar
The first step to reinforce the body connecting the left and right strut towers.The steel oval shaft and one-piece structure, which are advantageous in terms of rigidity, ensure the highest level of strength for a general tower bar.It is effective when installed separately, but it is best used in combination with a floor crossbar.>> More details
The first step to reinforce the body connecting the left and right strut towers.The steel oval shaft and one-piece structure, which are advantageous in terms of rigidity, ensure the highest level of strength for a general tower bar.It is effective when installed separately, but it is best used in combination with a floor crossbar.>> More details
<Main specifications> -Steel 2-piece structure XNUMX-point type
Wearing gallery
Wearing gallery
■ Center floor bar
It suppresses distortion near the center of the body monocoque, which cannot be compensated by strut tower bars and floor crossbars, and compensates for the "annular structure" effect of the SKYACTIV body.I try to have a low center of gravity layout that does not sacrifice the leg space of the rear seats as much as possible.>> More details
It suppresses distortion near the center of the body monocoque, which cannot be compensated by strut tower bars and floor crossbars, and compensates for the "annular structure" effect of the SKYACTIV body.I try to have a low center of gravity layout that does not sacrifice the leg space of the rear seats as much as possible.>> More details
<Main specifications> -Steel oval shaft 1-piece configuration 4-point type
Wearing gallery
Wearing gallery
■ Floor crossbar
An item that works like a rear tower bar by connecting the left and right sides of the rear floor.It is also a nice point to be able to utilize the high-strength seat mounting point to install it without sacrificing the utility of the luggage room at all.>> More details
An item that works like a rear tower bar by connecting the left and right sides of the rear floor.It is also a nice point to be able to utilize the high-strength seat mounting point to install it without sacrificing the utility of the luggage room at all.>> More details
<Main specifications> -Steel 3-piece structure XNUMX-point type
Wearing gallery
Wearing gallery
■ Lower arm bar (front)
By connecting the bases of the left and right lower arms, which are the suspension mounting base points, with steel oval pipes, minute alignment changes are suppressed.Improves the feeling of handling.>> More details
By connecting the bases of the left and right lower arms, which are the suspension mounting base points, with steel oval pipes, minute alignment changes are suppressed.Improves the feeling of handling.>> More details
<Main specifications> -Steel oval shaft 1-piece structure 2-point type
Wearing gallery
Wearing gallery
■ Lower arm bar (rear)
By connecting the bases of the left and right lower arms, which are the suspension mounting base points, with steel oval pipes, minute alignment changes are suppressed.Improves the feeling of handling.>> More details
By connecting the bases of the left and right lower arms, which are the suspension mounting base points, with steel oval pipes, minute alignment changes are suppressed.Improves the feeling of handling.>> More details
<Main specifications> -Steel oval shaft 1-piece structure 2-point type
Wearing gallery
Wearing gallery
■ Motion control beam
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with an ultra-high damping friction type damper, it creates a street-best ride with strength and suppleness.A set of two front and back.>> More details
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with an ultra-high damping friction type damper, it creates a street-best ride with strength and suppleness.A set of two front and back.>> More details
<Main specifications> ・ Friction type damper + steel shaft ・ With special mounting bracket
Wearing gallery
Wearing gallery
| Product name | 適合 車 種 (Model list) | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Strut tower bar | front | All cars | MBM4000 | ¥29,700 (¥ 27,000) | Steel 1-piece structure 2-point type | D | 0.5 h |
| Center floor bar | 2WD car | MBM4D00 | ¥35,200 (¥ 32,000) | Steel 1-piece structure 4-point type | D | 0.5 h | |
| Floor crossbar | rear | All cars (excluding BYEFP) BYEFP | MGJ450A Mby4500 | ¥19,800 (¥ 18,000) ¥17,600 (¥ 16,000) | Steel 1-piece structure 3-point type | D | 0.5 h |
| Lower arm bar | front rear | All cars ※ 1 All cars ※ 1 | MKE460 MKF4400 | ¥15,400 (¥ 14,000) | Steel 1-piece structure 2-point type | D | 0.5 h |
| Member brace set | Sports 2WD car ※ 1 | MBM4700 | sold out. | Steel 6-piece structure 14-point front and rear set | D | 1.5 h | |
| Motion control beam | All cars | MKF4900 | ¥104,500 (¥ 95,000) | Front and rear set with friction damper + steel shaft mounting bracket | E | 1.0 h |
※ 1 The member brace set and lower arm bar cannot be installed at the same time.
▶Intake & Exhaust Parts
In the intake / exhaust tune, which is directly linked to the pleasure of driving, the point is not to improve the peak power, but to react to instantly convey the driver's intention to the car.The accelerator response has been refined based on the air filter and muffler with moderately reduced resistance.The restrained sports sound also deepens communication between the driver and the car. >> Read more
Parts lineup Click to open ▼
■ Air filter replacement
Utilizing the air cleaner case of mass-produced cars, replacing only the filter part effectively improves the accelerator response.The dry filter, which has a good balance between ventilation performance and dust collection effect, is a disposable type that has little effect on the air flow sensor and is easy to maintain.>> More details
Utilizing the air cleaner case of mass-produced cars, replacing only the filter part effectively improves the accelerator response.The dry filter, which has a good balance between ventilation performance and dust collection effect, is a disposable type that has little effect on the air flow sensor and is easy to maintain.>> More details
<Main specifications> ・ Dry type ・ Disposable type
Wearing gallery
Wearing gallery
■ Sports induction box
Use the air cleaner box of a mass-produced car to replace the case on the suction side.Directly guides fresh air to the air filter to improve intake efficiency.The sound also changes to sports-like.Further increase efficiency by combining with the optional K & N air filter.>> More details
Use the air cleaner box of a mass-produced car to replace the case on the suction side.Directly guides fresh air to the air filter to improve intake efficiency.The sound also changes to sports-like.Further increase efficiency by combining with the optional K & N air filter.>> More details
<Main specifications> -Funnel type FRP frame + aluminum heat shield
■ Ram air intake system
A high-end intake system that pursues efficiency and looks.The area of the intake port of the fresh air duct has been expanded by 20% while following the basic layout of mass production that is not easily affected by the radiant heat of the radiator.By combining a 3-piece duct / large cleaner box with a straight path as much as possible and a dedicated cylindrical filter, the filling efficiency corresponding to the increased air is improved.Improves power and torque from the normal range.The appearance made of real carbon is also high quality.Compatible with diesel vehicles.>> More details
A high-end intake system that pursues efficiency and looks.The area of the intake port of the fresh air duct has been expanded by 20% while following the basic layout of mass production that is not easily affected by the radiant heat of the radiator.By combining a 3-piece duct / large cleaner box with a straight path as much as possible and a dedicated cylindrical filter, the filling efficiency corresponding to the increased air is improved.Improves power and torque from the normal range.The appearance made of real carbon is also high quality.Compatible with diesel vehicles.>> More details
<Main specifications>・Carbon air duct + dedicated air filter
Wearing gallery
Wearing gallery
■ Fresh air guide
The "Fresh Air Guide" is an item that supports the improvement of intake efficiency by directly capturing the running wind from the front of the vehicle body.By directly connecting the front grille, which does not have a clear intake path in mass-produced vehicles, to the air intake port installed at the top of the core support with a dedicated air duct, the effect of exhaust heat from radiators etc. is minimized, and fresh air is air cleanered. It is introduced in the box to improve the filling efficiency. >> More details
<Main specifications> -FRP red gel coat finish
Wearing gallery
The "Fresh Air Guide" is an item that supports the improvement of intake efficiency by directly capturing the running wind from the front of the vehicle body.By directly connecting the front grille, which does not have a clear intake path in mass-produced vehicles, to the air intake port installed at the top of the core support with a dedicated air duct, the effect of exhaust heat from radiators etc. is minimized, and fresh air is air cleanered. It is introduced in the box to improve the filling efficiency. >> More details
<Main specifications> -FRP red gel coat finish
Wearing gallery
■ Intake suction kit
Specifications that secure the maximum effective flow path area of intake air and reduce intake resistance.The material used is multi-layer polystar silicon or FRP pipe, which has a high effect of suppressing deformation due to suction negative pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details
Specifications that secure the maximum effective flow path area of intake air and reduce intake resistance.The material used is multi-layer polystar silicon or FRP pipe, which has a high effect of suppressing deformation due to suction negative pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details
<Main specifications> -Made of FRP / 4-layer polystar silicon hose-Detailed specificationsplease use this form. for more information.
Wearing gallery
Wearing gallery
■Premier tail muffler
All grades are XNUMX left and right.The inside of the silencer has been changed from the multi-stage inflatable silencer used in mass-produced vehicles to a straight structure.The pipe diameter / silencer inside is carefully tuned according to engine capacity to improve exhaust efficiency.Produces a restrained sports sound *.Made of high-quality oval tail stainless steel.>> More details
All grades are XNUMX left and right.The inside of the silencer has been changed from the multi-stage inflatable silencer used in mass-produced vehicles to a straight structure.The pipe diameter / silencer inside is carefully tuned according to engine capacity to improve exhaust efficiency.Produces a restrained sports sound *.Made of high-quality oval tail stainless steel.>> More details
<Main specifications> -Stainless steel-Straight structure silencer-Detailed specificationsplease use this form. for more information.
* Due to the structure of diesel vehicles, changes in sound quality and volume are minimal.
Wearing gallery Sound library
* Due to the structure of diesel vehicles, changes in sound quality and volume are minimal.
Wearing gallery Sound library
■ Exhaust finisher
A finisher that is bolt-on mounted on the muffler tail end of mass-produced vehicles.The oval shape, which is composed of thick and beautiful curves, has a high fit and renews the image of a general-purpose muffler cutter.Ideal for users who want to add fashionability while maintaining the functionality and sound.>> More details
A finisher that is bolt-on mounted on the muffler tail end of mass-produced vehicles.The oval shape, which is composed of thick and beautiful curves, has a high fit and renews the image of a general-purpose muffler cutter.Ideal for users who want to add fashionability while maintaining the functionality and sound.>> More details
<Main specifications> -Stainless steel-Set of 95 left and right-Tail Φ80 x XNUMX oval-AutoExe logo included
Wearing gallery
Wearing gallery
| Product name | 適合 車 種 (Model list) | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Air filter replacement | Diesel 2.2L car Gasoline 2.0L car Diesel / Gasoline 1.5L car BYEFP | MKE9A00 MBL9A10 MBM9A00 MDP9A00 | ¥9,350 (¥ 8,500) | Dry-type disposable (disposable) type | D | 0.3 h |
| Sports induction box (No filter) | BM series diesel 2.2L car (excluding BM2AS 6MT car) Diesel 1.5L car Gasoline 2.0L car BM5FS AT car / BM5FP AT car | MKE957 MBB957 MGJ957A MBZ957 | ¥38,500 (¥ 35,000) sold out. ¥38,500 (¥ 35,000) ¥38,500 (¥ 35,000) | Funnel type FRP frame + aluminum heat shield | D | 1.0 h |
| Sports induction box (With filter) | BM series diesel 2.2L car (excluding BM2AS 6MT car) Diesel 1.5L car Gasoline 2.0L car BM5FS AT car / BM5FP AT car | MKE957X MBB957X MGJ957XA MBZ957X | ¥49,500 (¥ 45,000) sold out. ¥49,500 (¥ 45,000) ¥49,500 (¥ 45,000) | Funnel type FRP frame + aluminum heat shield K & N air filter included | D | 1.0 h |
| Ram air intake system | Diesel 2.2L car Diesel 1.5L car Gasoline 2.0L car | BMA1 V5 900 MBB9590 BMA2 V5 900 | ¥123,200 (¥ 112,000) ¥99,000 (¥ 90,000) ¥96,800 (¥ 88,000) | Carbon air duct + carbon/FRP box Dedicated air filter included Carbon air duct + carbon/FRP box Dedicated air filter included Carbon box Dedicated air filter included | F | 1.0 h |
| Fresh air guide | Vehicles equipped with millimeter-wave radar ※ 1 | MBM9B00 | ¥35,200 (¥ 32,000) | FRP 2-piece configuration Red gel coat finish | D | 1.0 h |
| Intake suction kit | Diesel 2.2L car Diesel 1.5L car Gasoline 2.0L car Gasoline 1.5L car | MKE961 MDJ961 MBM961 MBM962 | ¥30,800 (¥ 28,000) ¥16,500 (¥ 15,000) ¥17,600 (¥ 16,000) ¥17,600 (¥ 16,000) | FRP red gel coat finish Silicone hose / band included Silicone hose Silicone hose Silicone hose | D | 0.5 h 0.2 h 0.3 h 0.3 h |
| Premier tail muffler | Bm2fs ※ 2 BMEFS BMLFS ※ 2 / BM5FS AT car | MBM8Y00 MBM8Y10 MBM8Y20A | sold out. ¥126,500 (¥ 115,000) sold out. | Stainless steel main pipe diameter φ60.5 Tail diameter 110 × 95mm (× 2) Stainless steel main pipe diameter φ60.5 Tail diameter 110 × 95mm (× 2) Stainless steel main pipe diameter φ50.8 Tail diameter 110 × 95mm (× 2) | D | 0.7 h |
| Exhaust chamber kit | BM2FS / BM2FP | MBM8400 | sold out. | Stainless steel main pipe diameter φ60.5 Chamber diameter φ89.1 | D | 0.5 h |
| Exhaust finisher | BM2FS / BM2AS / BMEFS | MGH8A00 | ¥38,500 (¥ 35,000) | Set of 2 with AutoExe logo for mounting genuine stainless steel muffler | D | 0.2 h |
※ 1 Installation requires removal of the top surface of the front bumper and relocation of the horn.Also, functionally, the effect of this product is minimal when the ram air intake system for gasoline vehicles (BMA2 V5 900) is installed.
※ 2 The change in sound quality and volume of diesel vehicles is minimal.
※ 2 The change in sound quality and volume of diesel vehicles is minimal.
▶brake parts
The first thing that is required of a brake is the ability to stop safely.And in order to enjoy running freely, controllability that can decelerate at will is required.The brake pad, which has a small change in the coefficient of friction (μ) even during continuous braking, and the brace, which increases the rigidity of the pedal mounting part and eliminates the delay in effectiveness, realizes the effect of synchronizing with the driver's sensibility. >> Read more
Parts lineup Click to open ▼
■ Street sports brake pads
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details
<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃
■ Street brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance.>> More details
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance.>> More details
<Main specifications> ・ 6 slits on one side ・ 1 piece type
■ Brake pedal brace
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details
<Main specifications> -Steel 2-piece structure
| Product name | 適合 車 種 (Model list) | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Street sports brake pads (front) | All BM series cars BYEFP | MBM5A10 MGJ5A10 | ¥16,500 (¥ 15,000) | Non-asbestos rotor Appropriate temperature: 0-400 ℃ | D | 0.5 h |
| Street sports brake pads (rear) | BM2FS / BM2FP-200001 ~, BM2AS / BM2AP-100001 ~ BM system (excluding BM2FS / BM2FP-200001 ~, BM2AS / BM2AP-100001 ~) BYEFP | MBM5A21 MBM5A20 MGJ5A20 | ¥14,300 (¥ 13,000) | Non-asbestos rotor Appropriate temperature: 0-400 ℃ | D | 0.5 h |
| Street brake rotor (front) | All BM series cars (Excluding BM5FS / BM5FP) BM5FS / BM5FP BYEFP | MDK5A50 MBM5A50 MGJ5A50A | ¥46,200 (¥ 42,000) ¥44,000 (¥ 40,000) ¥46,200 (¥ 42,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
| Street brake rotor (rear) | All BM series cars BYEFP | MBM5A55 MGJ5A55 | ¥41,800 (¥ 38,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
| Brake pedal brace | All BM series cars | MGJ4950 | ¥19,800 (¥ 18,000) | Steel 2-piece configuration | D | 0.6 h |
▶Engine & Drive train parts
A group of parts that draws out the full potential of the engine and converts it into traction.A sports clutch set and flywheel that support a pleasant gear change.Limited slip differential, which allows you to actively enjoy the change in the posture of the car when cornering, has created transient characteristics that eliminate sudden movements as much as possible while enhancing the direct feeling with the car.
Parts lineup Click to open ▼
■ Sports oil filter
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level. >> More details
<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level. >> More details
<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production
■ Sports clutch line
Uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and less expansion due to hydraulic pressure than the rubber used in mass-produced vehicles.Contributes to a direct clutch feel.In addition, PVC coating is applied to protect the hose for safety. >> More details
<Main specifications> -Stainless steel mesh PTFE + PVC coating
Uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and less expansion due to hydraulic pressure than the rubber used in mass-produced vehicles.Contributes to a direct clutch feel.In addition, PVC coating is applied to protect the hose for safety. >> More details
<Main specifications> -Stainless steel mesh PTFE + PVC coating
■ Turbo pipe
By optimizing the layout of the turbo pipe that guides the air supercharged by the turbine to the intercooler, and combining the aluminum elbow pipe whose inner wall is mirrored as much as possible and the 4-layer polyster silicon that has a high deformation suppressing effect, the hose expands due to pressurization. And suppresses the resistance of the air flow path.As a result, the boost pressure rises faster and turbo lag is reduced.Improve the response from the beginning of stepping on the accelerator.The product comes with a gasket required for installation. >> More details
<Main specifications> -Aluminum pipe (anodized) + silicon hose / band / gasket included
By optimizing the layout of the turbo pipe that guides the air supercharged by the turbine to the intercooler, and combining the aluminum elbow pipe whose inner wall is mirrored as much as possible and the 4-layer polyster silicon that has a high deformation suppressing effect, the hose expands due to pressurization. And suppresses the resistance of the air flow path.As a result, the boost pressure rises faster and turbo lag is reduced.Improve the response from the beginning of stepping on the accelerator.The product comes with a gasket required for installation. >> More details
<Main specifications> -Aluminum pipe (anodized) + silicon hose / band / gasket included
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Sports oil filter | Gasoline car / hybrid car | A00182 | ¥3,080 (¥ 2,800) | Built-in strong magnet Filtration area expanded by about 5% compared to mass production | D | 0.1 h |
| Sports clutch line | MT car | MBM6500 | ¥11,000 (¥ 10,000) | Stainless mesh PTFE hose + PVC coating | D | 0.5 h |
| Turbo pipe | Diesel 1.5L car | MDJ3960A | ¥46,200 (¥ 42,000) | Aluminum pipe (anodized finish) Silicon hose / band / gasket included | D | 0.8 h |
▶ Utlity Parts
In order to enjoy everyday driving, I want to pay attention not only to running but also to the texture and usability of the appearance.Please also pay attention to utility items with functionality not found in mass-produced cars, such as a side visor with a ventilation mechanism that tightens the style with a sporty aero form.
Parts lineup Click to open ▼
■ Oil filler cap
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details
<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo
■ Brake fluid cap
The resin mass-produced brake fluid tank cap has been upgraded to aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.Combined with an oil filler cap and level gauge grip with the same design, it accelerates the total coordination of the engine room. >> More details
<Main specifications> -Aluminum-Fully machined-Red alumite processing-Laser engraved AutoExe logo included
The resin mass-produced brake fluid tank cap has been upgraded to aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.Combined with an oil filler cap and level gauge grip with the same design, it accelerates the total coordination of the engine room. >> More details
<Main specifications> -Aluminum-Fully machined-Red alumite processing-Laser engraved AutoExe logo included
■ Fuel cap cover
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles. >> More details
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles. >> More details
<Main specifications> ・ ABS red painted ・ With decorative cap bolt ・ With AutoExe logo ・ Double-sided tape attached ・ Fuel label / erroneous oil supply prevention reminder sticker included
■ Optima Battery
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters. >> More details
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters. >> More details
<Main specifications> -Maintenance-free type made by Optima Battery
■ Aero sports wiper blade
An aero type wiper blade is used for the main body.By adding a deflector with fins, the arm joint is aero-formed.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain. >> More details
An aero type wiper blade is used for the main body.By adding a deflector with fins, the arm joint is aero-formed.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain. >> More details
<Main specifications> ・ Driver side: 600mm ・ Passenger seat side: 450mm ・ Twin rail type
■ Door handle cover & protector set
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately.>> More details
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately.>> More details
<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 4 ・ PVC protector x 4 ・ One set
■Antenna garnish
A dress-up item that makes the mass-produced shark fin antenna look fearless with its mechanical carbon pattern and AutoExe logo. The material is flexible PVC, and double-sided tape can be easily attached to the antenna body. *The antenna body is not included in the product.>> More details
<Main specifications> ・Carbon tone ・AutoExe logo included ・Made of PVC with double-sided tape ・Set of 2 left and right
A dress-up item that makes the mass-produced shark fin antenna look fearless with its mechanical carbon pattern and AutoExe logo. The material is flexible PVC, and double-sided tape can be easily attached to the antenna body. *The antenna body is not included in the product.>> More details
<Main specifications> ・Carbon tone ・AutoExe logo included ・Made of PVC with double-sided tape ・Set of 2 left and right
■ Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details
<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details
<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included
| Product name | 適合 車 種 (Model list) | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Oil filler cap | All cars | A1400-03 | ¥6,380 (¥ 5,800) | One-touch type Aluminum red alumite with AutoExe logo | D | 0.1 h |
| Oil level gauge grip | All cars | A1450-03 | ¥6,380 (¥ 5,800) | Aluminum red alumite with AutoExe logo Dedicated tool for mounting included | D | 0.2 h |
| Brake fluid cap | All BM series cars | A1900-03 | ¥7,480 (¥ 6,800) | Aluminum red alumite with AutoExe logo | D | 0.1 h |
| Fuel cap cover | All cars | A1600-03A | ¥5,280 (¥ 4,800) | ABS red painted decorative cap with bolt AutoExe logo | D | 0.1 h |
| Optima battery | Diesel 2.2L car Diesel 1.5L car / gasoline car BYEFP | A01100 A01200 A01400 | ¥80,300 (¥ 73,000) ¥62,920 (¥ 57,200) ¥53,900 (¥ 49,000) | Color: Yellow Top | F | 0.3 h |
| Battery clamp | All cars | A1700 | ¥7,480 (¥ 6,800) | Steel red paint with AutoExe logo | D | 0.1 h |
| Aero sports wiper blade | All cars | MKE0250 | ¥9,680 (¥ 8,800) | Equipped with a large wind deflector Water repellent glass compatible Front left and right set of 2 | D | 0.1 h |
| Sports side visor | All cars | MBM0400 | sold out. | Smoke acrylic resin 4 piece set with ventilation mechanism | D | 0.5 h |
| Door handle cover & protector set | All cars | KFA1 V3 110 | ¥29,260 (¥ 26,600) | Carbon-like weatherproof ABS cover x 4 PVC protector x 4 XNUMX set | D | 1.0 h |
| antenna garnish | Sports * 1 * 2 | DJA1 V3 040 | ¥8,800 (¥ 8,000) | Carbon-like PVC with AutoExe logo, double-sided tape attached, left and right set of 2 | D | 0.3 h |
| Wheel nut set | All cars | C9A1 V9 770 | ¥16,280 (¥ 14,800) | Includes a dedicated adapter wrench for mounting the Heptagon type with the AutoExe logo | D | 0.3 h |
※ 1 For BM2FS-106050~/BM2AS all cars/BMLFS all cars/BMEFS-200001~/BM5FS-200001~/BM5AS all cars.
※ 2 Sensitivity may decrease depending on the reception conditions when listening to the radio.
▶Interior parts
In order to clearly convey the driver's intention to drive to the car, I would like to pay close attention to the texture and functionality of the cockpit interface.For the interior, we have prepared an airbag-compatible steering wheel that has a casual and sporty sensibility and a shift knob that pursues a stroke feeling during operation.I want you to enjoy the dialogue with the car.
Parts lineup Click to open ▼
■ Sports steering wheel (nappa leather)
A red-colored center mark with a flat bottom shape ... An airbag-compatible product that uses high-quality nappa leather as the material for outstanding sportiness.The elliptical cross-section grip with dimple processing that is not too thick and easy to grip, and the dimple-processed leather and thumb grip that improve holdability are created with details to actively enjoy driving.>> More details
A red-colored center mark with a flat bottom shape ... An airbag-compatible product that uses high-quality nappa leather as the material for outstanding sportiness.The elliptical cross-section grip with dimple processing that is not too thick and easy to grip, and the dimple-processed leather and thumb grip that improve holdability are created with details to actively enjoy driving.>> More details
<Main specifications> -Made of nappa leather-SRS airbag system / steering switch compatible-Flat bottom shape
■ Sports steering wheel (genuine leather)
Sporty flat bottom shape.Specifications that are particular about details such as an oval cross-section grip that is easy to grip and a thumb grip that suppresses slippage.Emphasis is placed on operability and visibility, and the diameter is 370 mm, which is the same as that of mass-produced vehicles.>> More details
Sporty flat bottom shape.Specifications that are particular about details such as an oval cross-section grip that is easy to grip and a thumb grip that suppresses slippage.Emphasis is placed on operability and visibility, and the diameter is 370 mm, which is the same as that of mass-produced vehicles.>> More details
<Main specifications> -Flat bottom with a diameter of 370 mm-Red stitch-Compatible with genuine airbags / steering switches-Trade-in type
■ Carbon paddle shift lever
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving. >> More details
<Main specifications> ・ With AutoExe logo ・ Double-sided tape adhesive type ・ All 4 pieces configuration ・ Overall length 100mm (upper + 25mm lower + 10mm extension compared to mass production)
■ Shift knob (spherical shape / genuine leather)
Designed exclusively for straight AT vehicles, with a focus on the stroke feeling when the shift lock is released.The clean appearance and operability of mass-produced products without the unlock button are attractive.Push the upper end of the shift knob during operation.Shift the knob as it is.>> More details
Designed exclusively for straight AT vehicles, with a focus on the stroke feeling when the shift lock is released.The clean appearance and operability of mass-produced products without the unlock button are attractive.Push the upper end of the shift knob during operation.Shift the knob as it is.>> More details
<Main specifications> -For AT cars (straight type) -Made of genuine leather-Weight: 130g
Wearing gallery
Wearing gallery
■ Shift knob (spherical shape / genuine leather)
Made of genuine leather with a diameter of 51 mm with an emphasis on operability.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.AutoExe logo on the top.>> More details
Made of genuine leather with a diameter of 51 mm with an emphasis on operability.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.AutoExe logo on the top.>> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
■ Shift knob (genuine leather)
Small diameter size with a diameter of 42 mm.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.Two types of stitches, red stitch and black stitch, can be selected.AutoExe logo on the top. >> More details
Small diameter size with a diameter of 42 mm.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.Two types of stitches, red stitch and black stitch, can be selected.AutoExe logo on the top. >> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
Wearing gallery
Wearing gallery
| Product name | 適合 車 種 (Model list) | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Sports steering wheel (Nappa leather / red center mark) | Red stitch | Car after minor change * 1 * 2 | KFA1 V0 310 | ¥49,500 (¥ 45,000) | Flat bottom shape compatible with SRS airbag system / steering switch | D | 0.5 h |
| Sports steering wheel (Genuine Leather) | Red stitch | Car before minor change ※ 3 | MBM1370-03 | ¥41,800 (¥ 38,000) | Genuine SRS airbag system / steering switch compatible flat bottom shape | D | 0.5 h |
| Carbon paddle shift lever | Vehicles equipped with steering shift switch | A1382-20 | ¥16,280 (¥ 14,800) | Carbon 4-piece construction with AutoExe logo | D | 0.1 h | |
| Shift knob (spherical shape / genuine leather) | Red stitch | AT cars (excluding BYEFP) MT car | A1350B-03 A1341-03 | ¥19,580 (¥ 17,800) ¥9,900 (¥ 9,000) | Diameter: 51mm Overall length: 85mm Adjustable weight: 130g Push type Screw diameter: M10 x 1.25 Diameter: 51mm Overall length: 70-88mm Adjustable weight: 190g | D | 0.2 h 0.1 h |
| Shift knob (genuine leather) | Red stitch Black stitch | MT car MT car | A1396-03 A1396-08 | ¥9,680 (¥ 8,800) | Screw diameter: M10 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable weight: 190g | D | 0.1 h |
※ 1 BM2FS/BM2FP-200001～、BM2AS、BM2AP、BMLFS、BMLFP、BM5FS/BM5FP/BM5AS/BM5AP-400001～、BYEFP-200001～用。
※ 2 The steering heater is not equipped and will not work.
※ 3 マイナーチェンジ後車（BM2FS/BM2FP-200001～、BM5FS/BM5FP/BM5AS/BM5AP-400001～、BYEFP-200001～、BM2AS/BM2AP/BMLFS/BMLFP）に装着不可。
※ 2 The steering heater is not equipped and will not work.
※ 3 マイナーチェンジ後車（BM2FS/BM2FP-200001～、BM5FS/BM5FP/BM5AS/BM5AP-400001～、BYEFP-200001～、BM2AS/BM2AP/BMLFS/BMLFP）に装着不可。
▶ Goods
Real carbon and suede-like accessories that stand out sporty.Stickers and ornaments that decorate your styling.Please enjoy the coordination with your car in every detail with your sense.
Parts lineup Click to close ▲
■ Carbon number frame
Autoclave molded dry carbon license plate frame with dramatically improved material and design.UV cut clear coat finish that suppresses deterioration due to ultraviolet rays.A stainless steel AutoExe logo plate is placed in the center. >> More details
<Main specifications> -Autoclave molded dry carbon-UV cut clear coating finish-Stainless steel AutoExe logo plate included
■Carbon number bolt
High quality number bolt set using dry carbon for the plate part. Dress up your license plate smartly with the 3-piece configuration of our unique low-head stainless steel bolt/carbon washer. >> More details
<Main specifications> - Made of CFRP (logo plate part: dry carbon) - UV cut clear coating finish - Stainless steel low head bolt - AutoExe logo included - Set of 1 for 3 car
■ Fragment case
Advanced key/card type key can be stored.Based on black cordovan, which has excellent durability, perforated leather with red permeation expresses a sporty feeling.With card storage case + key chain.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
<Main specifications> Cordovan (horse leather), cow leather, AutoExe/ASHFORD embossed logo
■ Car verification case
High-quality black suede-like that smartly stores in-vehicle documents such as vehicle verification, instruction manuals, and maintenance notes.The red stitching, which is unified to the liner inside the case, also enhances the sports mind. >> More details
<Main specifications> -Black suede tone-Red stitch-AutoExe embossed logo-Size: 245 x 180 x 65 mm
■ Ornaments / stickers
You can enjoy it with your own taste.It is also good to dress up with the demo car as a model.
A lineup of high-quality AutoExe logo decorations that make you feel the commitment to driving. >> More details
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time | |
|---|---|---|---|---|---|---|---|
| Carbon number frame ※ 1 | For front license plate mounting | A1800-20 | ¥18,480 (¥ 16,800) | Made of CFRP (dry carbon) UV cut clear coating finish Comes with stainless steel AutoExe logo plate | D | 0.1 h | |
| carbon number bolt | General-purpose products (excluding character light type license plates) | C9A1 V9 760 | ¥9,350 (¥ 8,500) | Made of CFRP (logo plate part: dry carbon) UV cut clear coating finish Stainless steel low head bolts with AutoExe logo Set of 1 for 3 car | D | 0.1 h | |
| fragment case | General-purpose products | MAA0006 | ¥14,850 (¥ 13,500) | Made of cordovan (horse leather) and cowhide with AutoExe/ASHFORD logo Size: 150mm x 72mm x thickness 5-15mm | F | - | |
| key case | Vehicles equipped with advanced keys | A2640-33 | ¥4,180 (¥ 3,800) | Black suede-like red stitching with AutoExe logo.Size: 95mm x 45mm x 20mm | D | - | |
| Car verification case | General-purpose products | A2810-33 | ¥7,480 (¥ 6,800) | Black suede-like red stitch with AutoExe logo Size: 245 x 180 x 65 mm | D | - | |
| Bright ornament | General-purpose products | A12500 | ¥5,280 (¥ 4,800) | Chrome-plated ABS resin double-sided tape adhesive type Size 155mm x 20mm | D | - | |
| ornament | General-purpose products | A12000 | ¥1,980 (¥ 1,800) | Aluminum double-sided tape adhesive type Size 120mm x 24mm | B | - | |
| Message logo sticker | General-purpose products | A11900-03 | ¥880 (¥ 800) | One-touch transfer type Size 158mm x 28mm | B | - | |
| Logo sticker (L) | General-purpose products | silver Red white | A11200-02 A11200-03 A11200-04 | ¥1,320 (¥ 1,200) | Character type without characters Size 550mm x 56mm | B | - |
| Logo sticker (S) | General-purpose products | silver Red white | A11300-02 A11300-03 A11300-04 | ¥660 (¥ 600) | Character type without characters Size 270mm x 28mm | B | - |
※ 1 This product may appear on a part of the in-vehicle monitor screen such as a car equipped with a front camera.
