New release of street brake rotor.


BP-06S

bp06s_image1
bp06s_image2
bp06s_image3
previous arrow
next arrow
Shadow

To a high limit handling machine.
Hard tuned version BP-3S is born in MAZDA06!

Following the tuning kit BP-3 for MAZDA06, we at AutoExe will release a new BP-06S as the next challenge.The difference between the two personalities is that the BP-2S is a hard tuned version with a view to driving on the circuit, while the BP-06 pursues a nostalgic street sport for adults.It is a proposal of a high-limit handling machine that specializes in footwork, cutting down comfort to the limit that can be tolerated.
As functional parts, braces for obtaining tough body rigidity, inverted car harmonic club sports suspension kit with roll rigidity strengthened to 2OO% or more, and the estimated usage temperature has been raised to 2 ° C, which is about twice that for streets. Brake pads made of carbon fiber material realize a solid and tough maneuvering feeling that is different from mass-produced cars.As for the styling parts, the front under spoiler with a twin duct motif and the four-out sports muffler with the tail end cut off express the polished performance.
The MAZDA3, which has an innovative design that can be said to be extraordinary, will be raised to extraordinary high-limit handling even in driving.We hope that you will enjoy the ambitious tuning as you wish, on the winding road and sometimes on the circuit.


Styling Kit

● The tires and wheels in the photo are examples of installation.


Front under spoiler

The twin duct motif expresses a hot run.Piano black / matte black 2 colors painted.

Front grill

Trade in the Mazda emblem.Fin type with piano black on the surface and matte black paint on the recesses.

Muffler garnish

Garnish for sports muffler.The mass-produced bumper is cut and mounted to form an aggressive form.

Rear roof spoiler

Floating type full of sports mind.Piano black Painted / unpainted products are available.

Sports side visor

Equipped with a ventilation mechanism that actively discharges the air inside the vehicle by using the negative pressure generated during driving.

Fuel lid cover

A mechanical one-point item that gives off a metallic feel.Double-sided tape is attached to the mass-produced fuel lid cover.

The product is compatible with safety equipment such as millimeter-wave radar (SBS / MRCC) and AT false start suppression control, but it may not operate properly depending on the driving conditions, and its operation is not guaranteed.



■ BP-06S Styling Kit MAZDA3 (BP) For fastback
Product name適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work time
Front under spoilerFastbackBPA1 V4 900
(Old product number: MBP2110-08)
¥90,200
(¥ 82,000)
Piano black / matte black 2 colors painted ABS resin drilling requiredD1.0 h
Front grillFastbackMBP2510¥85,800
(¥ 78,000)
Piano black / matte black 2 colors painted ABS resinD1.0 h
Muffler garnishFastbackMBP2410¥30,800
(¥ 28,000)
For vehicles with sports muffler (MBP8Y50 / 8Y60) Cannot be installed separately AES black satin finish (no painting required) Rear bumper excision required
Cannot be installed at the same time as the rear under panel (MBP2400)
D1.0 h
Rear roof spoilerFastback



Fastback
BPA1 V4 920
(Old product number: MBP2600-08)


MBP2600
¥85,800
(¥ 78,000)


¥63,800
(¥ 58,000)
Piano black painted AutoExe ornament included FRP made drilling required



Painting required AutoExe Ornament included FRP drilling required
D1.0 h
Sports side visorFastbackBPA1 V3 700
(Old product number: MBP0400A)
¥25,300
(¥ 23,000)
Smoke acrylic resin 4 piece set with ventilation mechanismD0.5 h
Fuel lid coverFastbackMBP1610¥11,000
(¥ 10,000)
ABS chrome plated AutoExe logo double-sided tape adhesiveD0.3 h

■ Club Sports Suspension Kit
Hard specifications that cut down the comfort to the limit that we can tolerate and convert the margin to exercise performance.The standard vehicle height is -30mm.In order to maintain accurate operability even in winding and hard circuit driving, a monotube type inverted damper with excellent heat conversion ability and rigidity under high load and a series-wound spring with a spring constant that rises linearly are adopted.Creates a solid driving sensation with a high sense of change regardless of the speed range.>> More details
<Main specifications> ・ Vehicle height adjustment type
■ Sports muffler
Aggressive 4-piece slash tail specification that can be installed at the same time as the muffler garnish.In terms of functionality, improving exhaust efficiency has been given top priority, and the multi-stage expansion type of mass-produced vehicles has been changed to a straight structure to reduce back pressure loss.The pipe layout and silencer capacity have been carefully examined exclusively for diesel and gasoline vehicles to obtain agile response.By muting without using glass wool, it creates a sport sound with good clearness without stagnation up to the high register.>> More details
<Main specifications> ・ Stainless steel ・ Main pipe diameter φ60.5 ・ Tail diameter 80mm (× 4)
■ Club sports brake pads
Sometimes to the circuit ...A sports pad that aims for "deceleration at will" that synchronizes with the driver's sensibility in high load areas such as continuous corners and full braking from straight.The material is a blend of carbon and a metal material with excellent fade resistance.It balances the conflicting frictional force and the suppression of rotor aggression at a high level. >> More details
<Main specifications> ・ Graphite metal friction material ・ Rotor proper temperature: 50-800 ℃
■ Brake pedal brace
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details
<Main specifications> -Steel 2-piece structure
■ Aero sports wiper blade
Uses a flat type blade for the main body.By adding a deflector with fins, the arm joint is made into an aero form.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain.
<Main specifications> ・ Flat type ・ Equipped with wind deflector ・ Compatible with water-repellent glass ・ Set of 2 left and right
■ BP-06S Functional Parts MAZDA3 (BP) For fastback
Product name適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work time
Club Sports Suspension KitAll cars * 1 * 2MBP7970¥272,800
(¥ 248,000)
Monotube full length adjustment type damping force 24 steps adjustment type Recommended vehicle height-30mm Spring constant: Fr: 95.0 Rr: 68.61N / mmF3.2h
Sports mufflerFastback diesel car * 3 * 4


Fastback gasoline 2WD vehicle (excluding SKY-X)※ 3
MBP8Y50


MBP8Y60

¥134,200
(¥ 122,000)

¥158,400
(¥ 144,000)
Stainless steel main pipe diameter φ60.5 Tail diameter 80mm (× 4)D0.4 h
Muffler garnish
(For sports muffler installation)
Fastback ※ 3MBP2410¥30,800
(¥ 28,000)
AES black satin finish (no painting required)
Cannot be installed at the same time as the rear under panel (MBP2400)
D1.0 h
Club sports brake pads
(front)
All carsMBP5B10¥25,300
(¥ 23,000)
Graphite metal rotor Appropriate temperature: 50-800 ℃D0.5 h
Club sports brake pads
(rear)
All carsMBP5B20¥23,100
(¥ 21,000)
Graphite metal rotor Appropriate temperature: 50-800 ℃D0.5 h
Brake pedal braceAll cars except SKY-X ※ 5MBP4950¥19,800
(¥ 18,000)
Steel 2-piece configuration D0.5 h
Aero sports wiper bladeAll carsMBP0260¥9,680
(¥ 8,800)
Flat type wind deflector equipped Water repellent glass compatible 2 left and right setD0.1 h
※ 1 Functionally, it is not necessary to install the adjustable stabilizer link (product number: MBP7605) at the same time.
※ 2 When installed in a car with a 360 ° view monitor, it may be necessary to adjust the aiming of the camera.
※ 3 Cannot be installed separately.It is necessary to install the sports muffler (MBP8Y50 / 8Y60) and muffler garnish (MBP2410) at the same time.It is necessary to cut off the rear bumper for installation.
※ 4 Cannot be installed on 2WD 16-inch vehicles of XD PROACTIVE and XD PROACTIVE Turing Selection.
※ 5 A genuine stop lamp switch (BN7N-66-490A) x 1 is required for installation.

Development progress blog

BP-1

bp-06_image1
bp06_image4
bp-06_image3
previous arrow
next arrow
Shadow

To release that potential.
MAZDA3 fastback & sedan.

As a pioneer of the new generation Mazda cars, the MAZDA3 has a reputation for its unique styling and driving performance. We at AutoExe, which promotes the "Mazda Car Individualization Project," propose the sports version BP-06 as soon as possible based on our unique sensitivity tuning.So far, the street sports suspension kit that has refined the transient characteristics of the roll to obtain the depth of ride, and the ram air intake system that allows you to experience the improved response of the engine for both gasoline and diesel.And, at the same time as improving the torsional rigidity by using damping dampers at the front and rear ends of the body, we continuously release full-scale functional parts such as motion control beam that absorbs minute vibrations from the road surface, and for the pleasure of sharp sports driving. It continues to evolve.
The styling that visually emphasizes driving is specially designed for fastbacks and sedans.Front under spoiler and grille that emphasize wide and low.A visor with a ventilation mechanism that tightens the side view expresses a neat feeling of power.At first glance, from the moment you grab the steering wheel, go to the special MAZDA3 that uplifts the driver. I want you to fully release the extraordinary potential with AutoExe BP-06.

Styling Kit

Fastback

● The tires and wheels in the photo are examples of installation.

Front under spoiler

The wedge shape at the tip of the wing adds graceful strength.Piano black painted.

Front grill

A simple markless type with piano black on the surface and matte black paint on the recesses.

Rear under panel

A black satin finish that does not require painting to tighten the rear view together with the rear roof spoiler.

Rear roof spoiler

Floating type full of sports mind.Piano black Painted / unpainted products are available.

Sports side visor

Equipped with a ventilation mechanism that actively discharges the air inside the vehicle by using the negative pressure generated during driving.

The product is a millimeter wave product. The millimeter wave product is compatible with safety equipment such as millimeter wave radar (SBS / MRCC) and AT false start suppression control, but it may not operate properly depending on the driving conditions, and its operation is not guaranteed. is not.


■ BP-06 Styling Kit MAZDA3 (BP) For fastback
Product name適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work time
Front under spoilerFastbackMBP2100-08¥90,200
(¥ 82,000)
Piano black painted FRP made drilling requiredD1.0 h
Front grillFastbackMBP2500¥85,800
(¥ 78,000)
Piano black / matte black 2 colors painted ABS resinD1.0 h
Rear under panelFastbackBPA1 V3 300
(Old product number: MBP2400)
¥46,200
(¥ 42,000)
Black satin (no painting required) Made by AES Drilling required
Cannot be installed at the same time as the muffler garnish (MBP2410)
D0.5 h
Rear roof spoilerFastback



Fastback
BPA1 V4 920
(Old product number: MBP2600-08)


MBP2600
¥85,800
(¥ 78,000)


¥63,800
(¥ 58,000)
Piano black painted AutoExe ornament included FRP made drilling required



Painting required AutoExe Ornament included FRP drilling required
D1.0 h
Sports side visorFastbackBPA1 V3 700
(Old product number: MBP0400A)
¥25,300
(¥ 23,000)
Smoke acrylic resin 4 piece set with ventilation mechanismD0.5 h

Since

● The tires and wheels in the photo are examples of installation.

Front under spoiler

The wedge shape at the tip of the wing adds graceful strength.Piano black painted.

Front grill

A new horizontal design with piano black on the surface and matte black paint on the recesses.

Sports side visor

Equipped with a ventilation mechanism that actively discharges the air inside the vehicle by using the negative pressure generated during driving.

The product is compatible with each safety equipment such as millimeter wave radar (SBS / MRCC), but it may not operate properly depending on the weather and driving conditions as well as mass-produced vehicles.

■ BP-06 Styling Kit MAZDA3 (BP) For sedans
Product name適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work time
Front under spoilersedanBPA2 V4 900
(Old product number: MBP2150-08)
¥90,200
(¥ 82,000)
Piano black painted FRP made drilling requiredD1.0 h
Front grillsedan ※ 1MBP2510¥85,800
(¥ 78,000)
Piano black / matte black 2 colors painted ABS resinD1.0 h
Sports side visorsedanBPA2 V3 700
(Old product number: MBP0410)
¥25,300
(¥ 23,000)
Smoke acrylic resin 4 piece set with ventilation mechanismD0.5 h
※ 1 A genuine retainer (B0M8-67-UC5 / B0M7-67-UC5) x 1 each is required for installation.

<For customers considering simultaneous installation when purchasing a new car>
Some styling kits and functional parts are available as Mazda dealer options.For details, see the Mazda Motor Corporation website.[Accessory lineup]Also, please visit the sales staff of the sales company.


Functional Parts

New release of street brake rotor.

<Update information>

■ Street brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance. >> More details

・ Price including tax (tax excluded): ¥ 38,500 ~ (¥ 35,000 ~)
・ Code: D
<Main specifications> ・ 6 slits on one side, 1 piece type


Suspension

"A New Driving Sensation" Suspension is at the core of sporty driving.Our aim is to handle at will beyond the framework of mass-produced vehicles.For drivers who want to enjoy driving positively, it is not just hard and soft, but it provides a street best ride with refined dynamic sensitivity performance such as initial response at the time of steering and transient characteristics of roll. >> Read more

■ Lowdown spring
A low-down spring that tightens the styling sporty and improves handling by lowering the center of gravity.Not too low, not too strong ... By keeping the vehicle height to -20mm and the spring constant to about 110%, the suspension stroke is secured even in combination with mass-produced dampers, and consideration is given so that the damping ratio does not drop too much. ing.>> More details

<Main specifications> ・ Vehicle height: -20mm ・ Spring constant isthisPlease refer to.

■ Sports damper
Although it has the same shape as the mass-produced product, it uses a "micro low speed valve" that generates a precise damping force from the moment it starts moving to the internal piston.It accurately controls changes in the posture of the car and realizes a sporty, flat and high-quality ride.Recommended for use with low-down springs or genuine springs.>> More details
<Main specifications> ・ Fixed gas damping force
■ Street Sports Suspension Kit
The best street model that AutoExe thinks.A twin tube damper that quickly raises the damping force from the very low speed range and controls the roll speed based on dynamic Kansei engineering. Achieves linear maneuverability without compromising ride quality, such as setting the vehicle height based on -20mm.>> More details
<Main specifications> ・ Vehicle height adjustment type
■ Club Sports Suspension Kit
Hard specifications that cut down the comfort to the limit that we can tolerate and convert the margin to exercise performance.The standard vehicle height is -30mm.In order to maintain accurate operability even in winding and hard circuit driving, a monotube type inverted damper with excellent heat conversion ability and rigidity under high load and a series-wound spring with a spring constant that rises linearly are adopted.Creates a solid driving sensation with a high sense of change regardless of the speed range.>> More details
<Main specifications> ・ Vehicle height adjustment type
■ Adjustable stabilizer link
When the vehicle height is down, the angle of the lower arm changes.As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect.This product corrects the arm angle when the vehicle height is lowered by adjusting the link length.Optimize the stabilizer function.>> More details

<Main specifications> ・ Full length adjustable XNUMX-piece set ・ For front

■ Sports stabilizer
A stabilizer that connects the left and right suspension arms with a pipe and suppresses roll by the spring effect.This product has moderately strengthened spring rate from mass production.Stabilizes the posture when cornering while keeping controllability.Since the spring effect hardly occurs when going straight, the effect on the ride quality is minimal.>> More details

<Main specifications> ・ Front: Solid Φ25.0 ・ Spring constant (compared to mass-produced vehicles): 141%

 
Product name 適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work
Time
Low down springDiesel 2WD car※ 1



Gasoline 2.0L SKY-X 2WD car※ 1



Gasoline 2.0L 2WD vehicle (excluding SKY-X)※ 1



Gasoline 1.5L 2WD car※ 1

BPA1 V5 720
(Old product number: MBP7000)


BPA2 V5 720
(Old product number: MBP7300)


BPA3 V5 720
(Old product number: MBP7100)


BPA4 V5 720
(Old product number: MBP7200)

¥39,600
(¥ 36,000)
Vehicle height-20mm Spring constant: Fr24.3 Rr: 41.2N / mm


Vehicle height-20mm Spring constant: Fr24.3 Rr: 39.6N / mm


Vehicle height-20mm Spring constant: Fr21.6 Rr: 41.2N / mm


Vehicle height-20mm Spring constant: Fr21.2 Rr: 41.2N / mm
D2.6 h
Sports damperAll carsMBP7700¥77,000
(¥ 70,000)
Compatible with fixed damping force mass production springs / AutoExe springsD2.5 h
Street Sports Suspension KitAll cars ※ 1MBP7850¥173,800
(¥ 158,000)
Vehicle height adjustment type Damping force fixed type Spring constant: Fr: 31.4 Rr: 46.1N / mm
Adjustment range (mm) -5 to -25 (Gasoline 1.5L vehicle: -5 to -20)
D3.2 h
Club Sports Suspension KitAll carsMBP7970¥272,800
(¥ 248,000)
Monotube full length adjustment type damping force 24 steps adjustment type Recommended vehicle height-30mm Spring constant: Fr: 95.0 Rr: 68.61N / mmF3.2h
Adjustable stabilizer linkfrontAll cars ※ 2MBP7605¥24,200
(¥ 22,000)
Full length adjustable left and right set of 2D0.5 h
Sports stabilizer frontAll carsMBP7600¥30,800
(¥ 28,000)
Solid φ25.0 Spring constant (compared to mass-produced vehicles) 141%D2.0 h
※ 1 When installed in a car with a 360 ° view monitor, it may be necessary to adjust the aiming of the camera.
※ 2 When installing the Street Sports Suspension Kit (MBP7850) / Club Sports Suspension Kit (MBP7970), it is not necessary to install the same product due to its functionality.

Body

In order to enhance the sense of unity between the driver and the car, tuning to train the body is the basis.By suppressing slight distortion of each part of the body due to input from the road surface such as during cornering, the movement of the suspension initial operating area absorbed by the distortion is drawn out, and handling with a direct feeling without delay of reaction from the moment when the steering is started Contribute to. >> Read more

■ Strut tower bar
By connecting the left and right strut towers, the body rigidity is increased.The steel oval shaft, which is advantageous in terms of rigidity, and the one-piece structure ensure the highest level of strength for a two-point system.It is effective when installed separately, but it is best to use it together with the floor crossbar and lower arm bar that are set at the same time.>> More details
<Main specifications> -Steel 2-piece structure XNUMX-point type
■ Center floor bar
It suppresses distortion near the center of the body monocoque, which cannot be compensated by strut tower bars and floor crossbars, and compensates for the "annular structure" effect of the SKYACTIV body.I try to have a low center of gravity layout that does not sacrifice the leg space of the rear seats as much as possible.>> More details <Main specifications> -Steel oval shaft 1-piece configuration 4-point type
■ Floor crossbar
By crawling the bar on the floor, the effect is similar to that of a tower bar.There are three mounting points, such as a high-strength seat mounting part, and there is no need to drill holes in the body.There is no impact on the utility space.It is effective when used alone, but it is recommended to install it together with the strut tower bar.>> More details
<Main specifications> -Steel 2-piece structure 3-point type
■ Lower arm bar (front)
In mass-produced vehicles, deformation is suppressed by connecting the bases of the left and right lower arms, which are the suspension mounting base points of the open structure, with steel oval pipes.Supports accurate handling by regulating unnecessary alignment changes.Recommended for use with strut tower bars, floor cross bars, etc.>> More details
<Main specifications> -Steel oval shaft 1-piece structure 2-point type
■ Torsion beam stiffener
A tough gusset (reinforcing plate) to be attached to the torsion beam mounting parts on the left and right of the rear suspension.It suppresses unnecessary distortion of the same part that occurs when cornering, etc., and supports accurate handling.Best used with the front lower arm bar. >> More details
<Main specifications> -Steel 2-piece structure 2-point type
■ Member brace set
An evolved version of the lower arm bar.By mounting a steel frame with a three-dimensional truss structure on the body floor, the chassis rigidity of the highest level as a bolt-on part is obtained.Combined with a strut tower bar that reinforces the front and back of the upper part of the body, a tough monocoque body with two upper and lower stages is completed.Front and back set. >> More details
<Main specifications> -Steel oval shaft with all 3 pieces
■ Motion control beam
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with a friction type damper with ultra-high damping, it creates a street best ride with strength and suppleness.A set of two front and back.With a dedicated mounting bracket. >> More details
<Main specifications> -Friction type damper + steel shaft Front and rear set with mounting bracket
Product name 適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work
Time
Strut tower barfrontAll carsBPA1 V5 420
(Old product number: MBP4000)
¥26,400
(¥ 24,000)
Steel 1-piece structure 2-point typeD0.5 h
Center floor bar2WD car

4WD car
MBP4D00

MBP4D10
¥35,200
(¥ 32,000)
Steel 1-piece structure 4-point typeD0.5 h
Floor crossbarrearAll carsMBP4500¥19,800
(¥ 18,000)
Steel 1-piece structure 3-point typeD0.8 h
Lower arm bar front All cars ※ 1MBP4B00¥19,800
(¥ 18,000)
Steel 1-piece structure 2-point typeD0.5 h
Torsion beam stiffenerAll cars ※ 1MBP4F00¥17,600
(¥ 16,000)
Steel 2-piece structure 2-point type D0.5 h
Member brace setAll cars ※ 1MBP4700¥79,200
(¥ 72,000)
Steel 3-piece structure 10-point front and rear setD1.5 h
Motion control beamAll carsMBP4900A¥94,600
(¥ 86,000)
Front and rear set with friction damper + steel shaft mounting bracketE1.0 h
※ 1 The member brace set and lower arm bar / torsion beam stiffener cannot be installed at the same time.

Intake & Exhaust

In the intake / exhaust tune, which is directly linked to the pleasure of driving, the point is not to improve the peak power, but to react to instantly convey the driver's intention to the car.The accelerator response has been refined based on the air filter and muffler with moderately reduced resistance.The restrained sports sound also deepens communication between the driver and the car. >> Read more

■ Air filter replacement
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details
<Main specifications> ・ Dry type ・ Disposable type
■ Ram air intake system
It consists of a semi-open type real carbon cleaner box with a specially designed intake path and a special cylindrical filter.Fresh air is actively introduced from two locations, the mass-produced intake duct that introduces air from the rear of the front grill and the box opening.It increases the amount of intake air to promote fuel injection and obtains power and torque from the normal range.The dry sports sound that excites driving is also attractive.>> More details
<Main specifications> -Carbon box dedicated K & N air filter included
■ Intake suction kit
Specifications that secure the maximum effective flow path area of ​​intake air and reduce intake resistance.The material used is multi-layer polystar silicon, which has a high effect of suppressing deformation due to negative suction pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details
<Main specifications> -Made of Polystar Silicon Hose-Detailed specifications arethisPlease refer to.
■ Premier tail muffler (for diesel vehicles)
A series with a sophisticated and profound feeling. The 110x95mm oval-shaped tail end has a very mature texture.It has been tuned exclusively for diesel vehicles to achieve both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise of the interior.>> More details
<Main specifications> ・ Pipe diameter: Φ60.5 ・ Tail diameter: 110 × 95 × 2
■ Premier tail muffler (for gasoline vehicles)
A series with a sophisticated and profound feeling. The 110X95mm oval-shaped tail end has a very mature texture.With a large-capacity straight structure silencer that has been carefully tuned for a narrow main pipe diameter and internal structure, it achieves both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise of the room.>> More details
<Main specifications> ・ Pipe diameter: Φ60.5 ・ Tail diameter: 110 × 95 × 2
■ Sports muffler
Aggressive 4-piece slash tail specification that can be installed at the same time as the muffler garnish.In terms of functionality, improving exhaust efficiency has been given top priority, and the multi-stage expansion type of mass-produced vehicles has been changed to a straight structure to reduce back pressure loss.The pipe layout and silencer capacity have been carefully examined exclusively for diesel and gasoline vehicles to obtain agile response.By muting without using glass wool, it creates a sport sound with good clearness without stagnation up to the high register.>> More details
<Main specifications> ・ Stainless steel ・ Main pipe diameter φ60.5 ・ Tail diameter 80mm (× 4)
■ Muffler garnish
Garnish for sports muffler.The mass-produced bumper is cut and mounted to form an aggressive form.
<Main specifications> ・ Black (pear-skin) ・ Made by AES ・ Cannot be installed separately
Product name適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work
Time
Air filter replacementDiesel car, gasoline 1.5L car, gasoline 2.0L SKY-X car

Gasoline 2.0L car (excluding SKY-X)
MBP9A00

MBP9A10
¥7,150
(¥ 6,500)
Dry-type disposable (disposable) typeD0.3 h
Ram air intake systemDiesel Car

Gasoline 2.0L car (excluding SKY-X)
MBP9580

MBP9590
¥112,200
(¥ 102,000)
Includes K & N air filter for carbon boxE1.0 h
Intake suction kitDiesel Car


Gasoline 2.0L car (excluding SKY-X)


Gasoline 1.5L car
MBP9600


MBP9610


MBP9620
¥19,800
(¥ 18,000)

¥17,600
(¥ 16,000)

¥17,600
(¥ 16,000)
Silicone hoseD0.2 h


0.3 h


0.3 h
Premier tail mufflerFastback diesel car※ 1




Fastback gasoline 2WD car / SKY-X 2WD AT car※ 2



Sedan Gasoline 2WD vehicle (excluding SKY-X)
BPA1 V5 810
(Old product number: MBP8Y00)


BPA2 V5 810
(Old product number: MBP8Y10)


BPA3 V5 810
(Old product number: MBP8Y30)
¥91,300
(¥ 83,000)


¥118,800
(¥ 108,000)


¥118,800
(¥ 108,000)
Stainless steel main pipe diameter φ60.5 Tail diameter 110 × 95mm (× 2)D0.4 h
Sports mufflerFastback diesel car * 1 * 3


Fastback gasoline 2WD vehicle (excluding SKY-X)※ 3
MBP8Y50


MBP8Y60

¥134,200
(¥ 122,000)

¥158,400
(¥ 144,000)
Stainless steel main pipe diameter φ60.5 Tail diameter 80mm (× 4)D0.4 h
Muffler garnish
(For sports muffler installation)
Fastback ※ 3MBP2410¥30,800
(¥ 28,000)
AES black satin finish (no painting required)D1.0 h
※ 1 Cannot be installed on 2WD 16-inch vehicles of XD PROACTIVE and XD PROACTIVE Turing Selection.
※ 2 Cannot be installed on BPEP-102511 ~.
※ 3 Cannot be installed separately.It is necessary to install the sports muffler (MBP8Y50 / 8Y60) and muffler garnish (MBP2410) at the same time.It is necessary to cut off the rear bumper for installation.

Brake

The first thing that is required of a brake is the ability to stop safely.And in order to enjoy running freely, controllability that can decelerate at will is required.The brake pad, which has a small change in the coefficient of friction (μ) even during continuous braking, and the brace, which increases the rigidity of the pedal mounting part and eliminates the delay in effectiveness, realizes the effect of synchronizing with the driver's sensibility. >> Read more

■ Street sports brake pads
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details
<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃
■ Club sports brake pads
Sometimes to the circuit ...A sports pad that aims for "deceleration at will" that synchronizes with the driver's sensibility in high load areas such as continuous corners and full braking from straight.The material is a blend of carbon and a metal material with excellent fade resistance.It balances the conflicting frictional force and the suppression of rotor aggression at a high level. >> More details
<Main specifications> ・ Graphite metal friction material ・ Rotor proper temperature: 50-800 ℃
■ Street brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance. >> More details
Type
■ Brake pedal brace
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details
<Main specifications> -Steel 2-piece structure
Product name 適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work time
Street sports brake pads front


rear

All cars


All cars

MBP5A10


MBP5A20

¥16,500
(¥ 15,000)

¥14,300
(¥ 13,000)
Non-asbestos rotor Appropriate temperature: 0-400 ℃D0.5 h
Club sports brake pads front


rear

All cars


All cars

MBP5B10


MBP5B20

¥25,300
(¥ 23,000)

¥23,100
(¥ 21,000)
Graphite metal rotor Appropriate temperature: 50-800 ℃D0.5 h
Street brake rotorfront



front


rear
Diesel car, gasoline 4WD car, gasoline 2.0L SKY-X car

Gasoline 2WD vehicle (excluding SKY-X)

All cars
MDM5A50



MBP5A50


MBM5A55
¥41,800
(¥ 38,000)


¥39,600
(¥ 36,000)

¥38,500
(¥ 35,000)
1 piece type with cleaning slit Left and right 2 pieces setD1.0 h
Brake pedal braceAll cars except SKY-X ※ 1MBP4950¥19,800
(¥ 18,000)
Steel 2-piece configurationD0.5 h
※ 1A genuine stop lamp switch (BN7N-66-490A) x 1 is required for installation.

Engine & Drivetrain

A group of parts that draws out the full potential of the engine and converts it into traction.A sports clutch set and flywheel that support a pleasant gear change.Limited slip differential, which allows you to actively enjoy the change in the posture of the car when cornering, has created transient characteristics that eliminate sudden movements as much as possible while enhancing the direct feeling with the car.

■ Turbo pipe
By optimizing the layout of the turbo pipe that guides the air supercharged by the turbine to the intercooler, and combining the aluminum elbow pipe whose inner wall is mirrored as much as possible and the 4-layer polyster silicon that has a high deformation suppressing effect, the hose expands due to pressurization. And suppresses the resistance of the air flow path.As a result, the boost pressure rises faster and turbo lag is reduced.Improve the response from the beginning of stepping on the accelerator.The product comes with a gasket required for installation. >> More details
<Main specifications> -Aluminum pipe (anodized) + silicon hose / band / gasket included
■ Sports oil filter
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details
<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production
■ Sports clutch line
Uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and less expansion due to hydraulic pressure than the rubber used in mass-produced vehicles.Contributes to a direct clutch feel.In addition, PVC coating is applied to protect the hose for safety. >> More details
<Main specifications> -Stainless steel mesh PTFE + PVC coating
Product name適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work
Time
Turbo pipeDiesel CarMBP3960¥52,800
(¥ 48,000)
Aluminum pipe Silicon hose / band / gasket includedD0.8 h
Sports oil filterGasoline carA00182¥3,080
(¥ 2,800)
Built-in strong magnet Filtration area expanded by about 5% compared to mass production D0.1 h
Sports clutch lineMT carMBP6500¥11,000
(¥ 10,000)
Stainless mesh PTFE hose + PVC coatingD0.5 h

Utility

In order to enjoy everyday driving, I want to pay attention not only to running but also to the texture and usability of the appearance.Please also pay attention to utility items with functionality not found in mass-produced cars, such as a side visor with a ventilation mechanism that tightens the style with a sporty aero form.

■ Oil filler cap
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details
<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo
■ Oil level gauge grip
An item that replaces the resin grip of a mass-produced oil level gauge with aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.DIY installation is possible with the attached dedicated tool. Compatible with a wide range of vehicles equipped with the SKYACTIV engine. >> More details
<Main specifications> -Aluminum-Red alumite-With AutoExe logo-Includes a dedicated tool for mounting
■ Brake fluid cap
The resin mass-produced brake fluid tank cap has been upgraded to aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.Combined with an oil filler cap and level gauge grip with the same design, it accelerates the total coordination of the engine room. >> More details
<Main specifications> -Aluminum-Fully machined-Red alumite processing-Laser engraved AutoExe logo included
■ Fuel cap cover
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles. >> More details
<Main specifications> ・ ABS red painted ・ With decorative cap bolt ・ With AutoExe logo ・ Double-sided tape attached ・ Fuel label / erroneous oil supply prevention reminder sticker included
■ Fuel lid cover
Designed exclusively for vehicle models to be installed in mass-produced fuel lids.The product is made of ABS with a three-dimensional chrome-plated finish, and can be easily attached with double-sided tape.Gives a sporty and mechanical impression without breaking the character line of the vehicle.In addition, by combining it with the "fuel cap cover" that is attached to the separately sold mass-produced fuel cap, it is possible to enjoy a unified coordination around the fuel filler port. >> More details
■ Optima Battery
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters.>> More details
<Main specifications> -Maintenance-free type made by Optima Battery
■ Bonnet damper
The high-pressure gas damper assists light and smooth opening and closing.Since the existing lock stay is no longer required, the maintainability of the engine room is greatly improved.Bolt-on mounting is possible with a dedicated mount bracket that minimizes the load on the bonnet and frame of the mounting part.No drilling is required.>> More details
<Main specifications> ・ High-pressure filled gas damper ・ Dedicated bracket included
■ Battery clamp
Playful in the engine room. Made of one-piece steel designed with the image of an AutoExe strut tower bar.The bright red color and logo plate have been faithfully reproduced.>> More details
<Main specifications> -Steel red paint-With AutoExe ornament
■ Aero sports wiper blade
Uses a flat type blade for the main body.By adding a deflector with fins, the arm joint is made into an aero form.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain.
<Main specifications> ・ Flat type ・ Equipped with wind deflector ・ Compatible with water-repellent glass ・ Set of 2 left and right
■ Sports side visor
A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.>> More details
<Main specifications> -Smoke type acrylic resin-Set of 2 left and right with AutoExe logo
■ Door handle cover & protector set
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details
<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 4 ・ PVC protector x 4 ・ One set
■ Wheel nut set
Small diameter wheel nut with aluminum end cap with AutoExe logo.By adopting a modified heptagon (heptagon) design that requires a dedicated adapter wrench for mounting, it also has a function to prevent theft of the wheel.High-strength chrome vanadium steel that does not loosen easily at high temperatures is used as the material.>> More details
<Main specifications> ・ 20 pieces ・ Chrome vanadium steel + aluminum end cap ・ Size: M12 × P1.5 L = 32mm ・ Dedicated adapter wrench included
Product name適合 車 種part numberTax-included price
(Price without tax)
Spec.CodesReference work time
Oil filler capAll cars except SKY-XA1400-03¥6,380
(¥ 5,800)
One-touch type Aluminum red alumite with AutoExe logoD0.1 h
Oil level gauge gripAll cars except SKY-XA1450-03¥6,380
(¥ 5,800)
Aluminum red alumite with AutoExe logo Includes dedicated tool for mountingD0.2 h
Brake fluid capAll cars except SKY-XA1900-03¥7,480
(¥ 6,800)
Aluminum red alumite with AutoExe logoD0.1 h
Fuel cap coverAll carsA1600-03A¥5,280
(¥ 4,800)
ABS red painted AutoExe logoD0.1 h
Fuel lid coverFastbackMBP1610¥11,000
(¥ 10,000)
ABS chrome plated AutoExe logo double-sided tape adhesiveD0.3 h
Optima batteryAll carsA01200¥47,520
(¥ 43,200)
Maintenance-free type Color: Yellow topF0.3 h
Battery clampAll carsA1750¥8,580
(¥ 7,800)
Steel red paint with AutoExe logoD0.1 h
Aero sports wiper bladeAll carsMBP0260¥9,680
(¥ 8,800)
Flat type wind deflector equipped Water repellent glass compatible 2 left and right setD0.1 h
Bonnet damperAll carsMBP2960¥22,000
(¥ 20,000)
High-pressure gas-filled damper + dedicated mounting bracket Set of 2 left and rightD1.0 h
Sports side visorFastback


sedan
BPA1 V3 700
(Old product number: MBP0400A)

BPA2 V3 700
(Old product number: MBP0410)
¥25,300
(¥ 23,000)
Smoke acrylic resin 4 piece set with ventilation mechanismD0.5 h
Door handle cover & protector setAll carsA00163X-20¥29,260
(¥ 26,600)
Carbon-like weatherproof ABS cover x 4 PVC protector x 4 XNUMX setD0.6 h
Wheel nut setAll carsA00100B¥14,080
(¥ 12,800)
Deformed Heptagon (Heptagon) type with AutoExe logo Included with a dedicated adapter wrench for mountingD0.3 h

Interior

In order to clearly convey the driver's intention to drive to the car, I would like to pay close attention to the texture and functionality of the cockpit interface.For the interior, we have prepared an airbag-compatible steering wheel that has a casual and sporty sensibility and a shift knob that pursues a stroke feeling during operation.I want you to enjoy the dialogue with the car.

■ Sports steering wheel
A red-colored center mark with a flat bottom shape ... An airbag-compatible product with outstanding sportiness.High-quality napper leather is used as the material, and the diameter has been reduced by 7 mm from mass production.Details such as an oval cross-section grip that is not too thick and easy to grip, dimple-processed leather that enhances holdability, and a thumb grip are created to actively enjoy driving. >> More details
<Main specifications> -Made of nappa leather-SRS airbag system / steering switch compatible-Flat bottom shape
■ Carbon paddle shift lever
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving. >> More details
<Main specifications> ・ With AutoExe logo ・ Double-sided tape adhesive type ・ All 4 pieces configuration ・ Overall length 100mm (upper + 25mm lower + 10mm extension compared to mass production)
■ Shift knob (spherical shape / genuine leather)
Designed exclusively for straight AT vehicles, with a focus on the stroke feeling when the shift lock is released.The clean appearance and operability of mass-produced products without the unlock button are attractive.Push the upper end of the shift knob during operation.Shift the knob as it is.>> More details
<Main specifications> -For AT cars (straight type) -Made of genuine leather-Weight: 130g
■ Shift knob (spherical shape / genuine leather)
Made of genuine leather with a diameter of 51 mm with an emphasis on operability.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.AutoExe logo on the top.>> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
■ Shift knob (genuine leather)
Small diameter size with a diameter of 42 mm.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.Two types of stitches, red stitch and black stitch, can be selected.AutoExe logo on the top. >> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
■ Wide rear view mirror

Frameless type designed exclusively for Mazda vehicles.The blue-coated mirror has a wide field of view up to 1.8 times wider than mass production.The radius of curvature is 3000SR, reducing the parallax with the side mirrors.Contributes to comfortable driving with little viewpoint movement.The smart fitting is attractive. >> More details
<Main specifications> ・ Blue chrome surface mirror ・ Approximately 1.8 times the viewing area mass production ratio ・ Curvature radius 3000SR AutoExe logo included

Product name 適合 車 種
(Model list)
part numberTax-included price
(Price without tax)
Spec.CodesReference work
Time
Sports steering wheelRed stitchAll cars ※ 1BPA1 V0 310
(Old product number: MBP1370A-03)
¥49,500
(¥ 45,000)
Nappa leather SRS airbag system / steering switch compatible flat bottom shapeD0.4 h
Carbon paddle shift leverVehicles equipped with steering shift switchA1383-20¥17,380
(¥ 15,800)
Carbon 4-piece construction with AutoExe logoD0.1 h
Shift knob (spherical shape / genuine leather)Red stitchAT car


MT car
A1350A-03


A1341-03
¥16,280
(¥ 14,800)

¥9,900
(¥ 9,000)
Diameter: 51mm Overall length: 85mm Push type


Screw diameter: M10 x 1.25 Diameter: 51mm Overall length: 70-88mm Adjustable weight: 190g
D


D
0.2 h


0.1 h
Shift knob (genuine leather)Red stitch

Black stitch
MT car

MT car
A1396-03

A1396-08
¥9,680
(¥ 8,800)
Screw diameter: M10 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable weight: 190gD0.1 h
Wide rear view mirrorVehicles equipped with automatic anti-glare rearview mirrorA1520¥11,000
(¥ 10,000)
Blue chrome surface mirror Approximately 1.8 times the viewing area mass production ratio Radius of curvature 3000SRE0.1 h
※ 1 The steering heater is not equipped and will not work.

Goods

Real carbon and suede-like accessories that stand out sporty.Stickers and ornaments that decorate your styling.Please enjoy the coordination with your car in every detail with your sense.

■ Carbon number frame
Autoclave molded dry carbon license plate frame with dramatically improved material and design.UV cut clear coat finish that suppresses deterioration due to ultraviolet rays.A stainless steel AutoExe logo plate is placed in the center. >> More details
<Main specifications> -Autoclave molded dry carbon-UV cut clear coating finish-Stainless steel AutoExe logo plate included
■ Carbon key cover
Dedicated to the new advanced key.Autoclave manufacturing method used for racing car bodies, etc. Made of dry carbon.The texture that makes the most of the texture of the material is attractive. >> More details
<Main specifications> -Made of dry carbon-With AutoExe logo-2-piece configuration-Double-sided tape adhesive type

■ Car verification case
High-quality black suede-like that smartly stores in-vehicle documents such as vehicle verification, instruction manuals, and maintenance notes.The red stitching, which is unified to the liner inside the case, also enhances the sports mind. >> More details
<Main specifications> -Black suede tone-Red stitch-AutoExe embossed logo-Size: 245 x 180 x 65 mm
■ Ornaments / stickers
You can enjoy it with your own taste.It is also good to dress up with the demo car as a model.A lineup of high-quality AutoExe logo decorations that make you feel the commitment to driving. >> More details
Product name適合 車 種 part numberTax-included price
(Price without tax)
Spec.CodesReference work time
Carbon number frame ※ 1General-purpose products
For front license plate mounting
A1800-20¥18,480
(¥ 16,800)
Autoclave molded dry carbon UV cut clear coating finish with stainless steel AutoExe logo plateD0.1 h
Carbon key coverGeneral-purpose products
Vehicles equipped with the new advanced key
A2650-20¥10,780
(¥ 9,800)
2-piece configuration with dry carbon AutoExe logo Double-sided tape adhesive typeD-
Car verification caseGeneral-purpose productsA2810-33A¥7,480
(¥ 6,800)
Black suede-like red stitch with AutoExe logo Size: 245 x 180 x 65 mmD-
Bright ornamentGeneral-purpose productsA12500¥5,280
(¥ 4,800)
Chrome-plated ABS resin double-sided tape adhesive type Size 155mm x 20mmD-
ornamentGeneral-purpose productsA12000¥1,980
(¥ 1,800)
Aluminum double-sided tape adhesive type Size 120mm x 24mmB-
Wind logo stickerGeneral-purpose productsblackA10000-08¥1,540
(¥ 1,400)
One-touch transfer type Size 235mm x 48mmB-
Message logo stickerGeneral-purpose productsA11900-03¥880
(¥ 800)
One-touch transfer type Size 158mm x 28mmB-
Logo sticker (L)General-purpose productssilver

Red

white
A11200-02

A11200-03

A11200-04
¥1,320
(¥ 1,200)
Character type without characters Size 550mm x 56mmB-
Logo sticker (S)General-purpose productssilver

Red

white
A11300-02

A11300-03

A11300-04
¥660
(¥ 600)
Character type without characters Size 270mm x 28mmB-
※ 1 This product may appear on a part of the in-vehicle monitor screen such as a car equipped with a front camera.
 

MAZDA3 Parts impression

We are posting the raw voice of the customer who is actually wearing it.
Please refer to the car personalization project.

MAZDA3 / Axela
The best answer for me.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
Intake and exhaust system
MAZDA3 / Axela
The look changes drastically.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
ス タ イ リ ン グ
MAZDA3 / Axela
It feels good to see the red color.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
Intake and exhaust system
MAZDA3 / Axela
For a tight impression.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
suspension,ス タ イ リ ン グ
MAZDA3 / Axela
The height of the car has dropped moderately and I like it.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
suspension,Intake and exhaust system
MAZDA3 / Axela
Just the right size and easy to paste.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
Goods
MAZDA3 / Axela
Wearing it looks cool.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
Interior
MAZDA3 / Axela
Growth improved during high-speed driving.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
Intake and exhaust system
MAZDA3 / Axela
A dish that we would like to recommend.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
suspension
MAZDA3 / Axela
Anyway, it's easy.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
ー ー テ ィ リ テ テ ー ー
MAZDA3 / Axela
It will be really cool!
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
Interior
MAZDA3 / Axela
It goes smoothly even after a shift change.
Impressions by vehicle type
MAZDA3 / Axela
Impressions by parts
ボ デ ィ