Front under spoiler

The three-dimensional intake duct and the wedge shape at the tip of the wing add a flowing force.Piano black painted.

Front grill

Trade in the Mazda emblem.Fin type with piano black on the surface and matte black paint on the recesses.

Rear under spoiler

A diffuser design with a three-dimensional effect that is integrally molded up to the periphery of the left and right mufflers.Piano black painted.

Rear roof spoiler

The left and right wingtips are accented.Wing type full of sports mind.Piano black painted (unpainted product setting available).

Door mirror cover

Matte finish carbon-look left and right set with subtle fin design. AutoExe logo sticker included. Double-sided tape attached.

Sports side visor

Equipped with a ventilation mechanism that actively discharges the air inside the vehicle by using the negative pressure generated during driving.

Door handle cover & protector set

A matte carbon finish that protects the paint on the door handle and gives the styling a sporty look.

Front under spoiler dimensional drawing
The stated dimensions are the difference from the mass production bumper.Please use it as a guide when installing a styling kit such as road clearance.

Front under spoiler

An additional type that can be attached to a mass-produced front bumper to visually realize a low form.The wedge shape at the tip of the wing, which is an accent, adds a flowing power to the CX-8.Piano black painted.

Front grill

A simple markless grill that expresses neatness and power.Piano black is applied to the surface and matte black is applied to the recesses to emphasize the three-dimensional form.Trade-in with mass-produced grills.

Muffler garnish

The combination of the dual tail with four left and right and the exclusive muffler garnish makes the rear view look fearless.

Rear roof spoiler

Wing type that tightens the rear view.The wedge shape at the tip of the wing, which aims for total coordination with the front under spoiler, enhances the sense of dynamism.Piano black painted.

Sports side visor

A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.

■ Lowdown spring
A low-down spring that tightens the styling sporty and improves handling by lowering the center of gravity.Not too low, not too strong ... By keeping the vehicle height to -30mm and the spring constant to about 110%, the suspension stroke is secured even in combination with mass-produced dampers, and consideration is given so that the damping ratio does not drop too much. ing.>> More details

<Main specifications> ・ Vehicle height: -30mm ・ Spring constant is here. for more information.

Wearing gallery

■ Sports damper
Although it has the same shape as the mass-produced product, the internal piston adopts a "very low speed valve" that generates precise damping force from the moment it starts moving.It accurately controls changes in the vehicle's posture and achieves a sporty, flat and high-quality ride.It is recommended to use with genuine springs (can be used with lowdown springs).>> More details

<Main specifications> ・ Fixed gas damping force

■ Street Sports Suspension Kit
The best street model that AutoExe thinks.A twin tube damper that quickly raises the damping force from the very low speed range and controls the roll speed based on dynamic Kansei engineering.Achieves linear maneuverability without compromising ride comfort.>> More details

<Main specifications> ・ Spring constant Fr: 32.3N / mm Rr: 66.6N / mm

Wearing gallery

■ Adjustable stabilizer link
When the vehicle height is down, the angle of the lower arm changes.As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect.This product corrects the arm angle when the vehicle height is lowered by adjusting the link length.Optimize the stabilizer function.>> More details

<Main specifications> -Full length adjustable XNUMX-piece set-Front and rear settings.

■ Sports stabilizer
A stabilizer that connects the left and right suspension arms with a pipe and suppresses roll by the spring effect.This product has moderately strengthened spring rate from mass production.Stabilizes the posture when cornering while keeping controllability.Since the spring effect hardly occurs when going straight, the effect on the ride quality is minimal.>> More details

<Main specifications> ・ Front / rear settings ・ Front: Solid Φ24.0 ・ Rear: Solid Φ19.0 (2WD car) / Solid Φ20.0 (4WD car)

■ Strut tower bar
By connecting the left and right strut towers, the body rigidity is increased.The steel oval shaft, which is advantageous in terms of rigidity, and the one-piece structure ensure the highest level of strength for a two-point system.It is effective when installed separately, but it is best to use it together with the floor crossbar and lower arm bar that are set at the same time.>> More details

<Main specifications> -Steel 2-piece structure XNUMX-point type

Wearing gallery

■ Floor crossbar
By running the bar on the rear floor, it has an effect similar to that of a tower bar.There is no need to drill holes in the body as the mounting points utilize 3 points such as the seat mounting part with high strength.No impact on utility space.Although it is effective even when used alone, it is recommended to use it together with the strut tower bar.>> More details

<Main specifications> -Steel 1-piece structure 3-point type

Wearing gallery

■ Lower arm bar (front)
In mass-produced vehicles, deformation is suppressed by connecting the bases of the left and right lower arms, which are the suspension mounting base points of the open structure, with steel oval pipes.Supports accurate handling by regulating unnecessary alignment changes.Recommended for use with strut tower bars, floor cross bars, etc.>> More details

<Main specifications> -Steel oval shaft 1-piece structure 2-point type

Wearing gallery

■ Lower arm bar (rear)
In mass-produced vehicles, deformation is suppressed by connecting the bases of the left and right lower arms, which are the suspension mounting base points of the open structure, with steel oval pipes.Supports accurate handling by regulating unnecessary alignment changes.Recommended for use with floor crossbars.>> More details

<Main specifications> -Steel oval shaft 1-piece structure 2-point type

Wearing gallery

■ Member brace set
An evolved version of the lower arm bar.By mounting a steel frame with a three-dimensional truss structure on the body floor, the chassis rigidity of the highest level as a bolt-on part is obtained.Combined with a strut tower bar that reinforces the front and back of the upper part of the body, a tough monocoque body with two upper and lower stages is completed.Front and back set.　>> More details

<Main specifications> -Steel oval shaft with all 6 pieces

Wearing gallery

■ Motion control beam
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with an ultra-high damping friction type damper, it creates a street-best ride with strength and suppleness.A set of two front and back.>> More details

<Main specifications> ・ Friction type damper + steel shaft ・ With special mounting bracket

Wearing gallery

■ Air filter replacement
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details

<Main specifications> ・ Dry type ・ Disposable type

■ Sports induction box
By utilizing the air cleaner box of a mass-produced vehicle, the intake side case is replaced. Fresh air is directly guided to the air filter, improving intake efficiency. The sound also becomes sporty. Combining it with the optional air filter replacement increases efficiency even further.>> More details

<Main specifications> -Funnel type FRP frame + aluminum heat shield

■ Ram air intake system
A high-end intake system that pursues efficiency and looks.While following the basic layout of mass production that is not easily affected by the radiant heat of the radiator, the suction port area of ​​the fresh air duct has been expanded by 50%.By combining a 3-piece duct / large cleaner box with a straight path as much as possible and a dedicated cylindrical filter, the filling efficiency corresponding to the increased air is improved.Improves power and torque from the normal range.The appearance made of real carbon is also high quality.>> More details

<Main specifications>・Carbon air duct + dedicated air filter

Wearing gallery

■ Fresh air guide
The "Fresh Air Guide" is an item that supports the improvement of intake efficiency by directly capturing the running wind from the front of the vehicle body.By directly connecting the front grille, which does not have a clear intake path in mass-produced vehicles, to the air intake port installed at the top of the core support with a dedicated air duct, the effect of exhaust heat from radiators etc. is minimized, and fresh air is air cleanered. It is introduced in the box to improve the filling efficiency. >> More details

<Main specifications> -FRP red gel coat finish

Wearing gallery

■ Intake suction kit
Specifications that secure the maximum effective flow path area of ​​intake air and reduce intake resistance.The material used is multi-layer polystar silicon or FRP pipe, which has a high effect of suppressing deformation due to suction negative pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details

<Main specifications> -Made of FRP / 4-layer polystar silicon hose-Detailed specifications here. for more information.

Wearing gallery

■ Premier tail muffler
As a new CX-8 exclusive item, set for diesel/gasoline NA vehicles respectively.The large-diameter oval-shaped tail end has a very mature feel.With a narrow main pipe diameter and a straight structure silencer that carefully tunes the internal structure, it achieves both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise in the cabin.>> More details

<Main specifications> ・ Stainless steel ・ Main diameter: Φ60.5 ・ Tail diameter: Φ110 × 95 × 2 ・ Safety standard compliant product

Wearing gallery

■ Sports muffler (for diesel vehicles)
Compatible with pre-facelift models.A straight structure that gives the rear view a fearless appearance by combining the left and right dual tails with a dedicated muffler garnish.A resonator (resonance chamber) installed in the middle of the pipe interferes with and cancels out the sound waves to suppress unpleasant low frequencies (boiling sound), improving both the acceleration response and the clear exhaust note. Let

<Main specifications> ・ Pipe diameter: Φ60.5 ・ Tail diameter: Φ90 × 4 * Simultaneous installation with muffler garnish is required.

[Sound library for audition] * You can compare it with the mass-produced muffler recorded under the same conditions.It may not be accurate due to the characteristics of the playback environment, but please watch it as a reference for changes in sound quality and volume.

Wearing gallery

■ Sports muffler (for gasoline vehicles)
Compatible with pre-Facelift models.The combination of left and right dual tails and a special muffler garnish gives the rear view a fearless appearance.A straight structure silencer that silences sound by interfering sound waves with parallel arrangement of internal pipes with a punching structure is adopted exclusively for gasoline vehicles.It achieves both improved accelerator response and a clear exhaust note.

<Main specifications> ・ Pipe diameter: Φ60.5 ・ Tail diameter: Φ90 × 4
* Must be installed at the same time as the muffler garnish.>> More details　

Wearing gallery

■ Muffler garnish
Muffler garnish exclusively for sports mufflers.Black satin finish that does not require painting.A part of the mass-produced bumper is cut off and installed at the same time as the muffler to realize a form full of unity.Cannot be installed separately.>> More details

<Main specifications> -Black (pear-skin) -Made by AES-Cannot be installed separately * Requires simultaneous installation with a sports muffler.　

Wearing gallery

■ Exhaust chamber kit
The aim of the intermediate exhaust pipe kit with a built-in chamber mechanism is to expand the "suction effect (pulsation effect)".Exhaust efficiency is improved by properly laying out a specially sized chamber.It is possible to install the parts individually, but we recommend using them together with the AutoExe muffler. >> More details

<Main specifications> ・ Main pipe diameter: Φ60.5 ・ Chamber diameter: Φ89.1　

Wearing gallery

■ Exhaust finisher
A finisher that bolts on to the tail end of the genuine muffler.The oval shape, which is composed of thick and beautiful curves, renews the image of the conventional muffler cutter.It is ideal for users who want to add fashionability while keeping the genuine muffler.>> More details

<Main specifications> -Stainless steel-Set of 95 left and right-Tail Φ80 x XNUMX oval-AutoExe logo included　

■ Street sports brake pads
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details

<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃

■ Street brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance.>> More details

<Main specifications> ・ 6 slits on one side ・ 1 piece type

■ Brake pedal brace
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details

<Main specifications> -Steel 2-piece structure

■Sports oil filter
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details

<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production

■ Oil filler cap
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression.　>> More details

<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo

■ Oil level gauge grip
An item that replaces the resin grip of a mass-produced oil level gauge with aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.DIY installation is possible with the attached dedicated tool. Compatible with a wide range of vehicles equipped with the SKYACTIV engine.　>> More details

<Main specifications> -Aluminum-Red alumite-With AutoExe logo-Includes a dedicated tool for mounting

■ Brake fluid cap
The resin mass-produced brake fluid tank cap has been upgraded to aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.Combined with an oil filler cap and level gauge grip with the same design, it accelerates the total coordination of the engine room.　>> More details

<Main specifications> -Aluminum-Fully machined-Red alumite processing-Laser engraved AutoExe logo included

■ Fuel cap cover
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles.　>> More details

<Main specifications> ・ ABS red painted ・ With decorative cap bolt ・ With AutoExe logo ・ Double-sided tape attached ・ Fuel label / erroneous oil supply prevention reminder sticker included

■ Optima Battery
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters.>> More details

<Main specifications> -Maintenance-free type made by Optima Battery

■ Battery clamp
Playful in the engine room. Made of one-piece steel designed with the image of an AutoExe strut tower bar.The bright red color and logo plate have been faithfully reproduced.>> More details

<Main specifications> -Steel red paint-With AutoExe ornament

■ Aero wiper deflector set
Dedicated to CX-5 (KF) / CX-8 (KG) / Atenza (GJ series-400001 ~) equipped with top lock type wiper.A wind deflector that receives wind pressure and suppresses the lift of the blade is attached to the mass-produced wiper arm to complete the aero style.A set of 2 for the front. >> More details

<Main specifications> -Wind deflector for mounting mass-produced wiper arm 2 left and right set

■Sports side visor
A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.>> More details

<Main specifications> -Smoke type acrylic resin-Set of 4 left and right with AutoExe logo

Wearing gallery

■ Door handle cover & protector set
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details

<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 4 ・ PVC protector x 4 ・ One set

■Door mirror cover
Easy to attach to door mirrors. A dress-up item that faithfully reproduces the matte carbon pattern. The inside of the door mirror, as seen from inside the car, features a fin-shaped design that evokes the flow of wind, giving the body a sporty look. Includes AutoExe logo sticker. Double-sided tape attached.>> More details

<Main specifications> ・Made by AES ・Includes AutoExe logo sticker ・Double-sided tape attachment ・Set of left and right

■Door handle protector
Made of carbon-like PVC that protects the paint around the door handle, which is easily damaged when opening and closing. The lineup includes three colors: black, silver, and red (a color similar to Soul Red Crystal Metallic) that can be selected according to the body color.>>Click here for part numbers and prices

<Main specifications> - Carbon-like AutoExe logo included - PVC double-sided tape adhesive - Left and right set - Front/rear common use (1 sets required for 2 car)

■antenna garnish
A dress-up item that makes the mass-produced shark fin antenna look fearless with its mechanical carbon pattern and AutoExe logo. The material is flexible PVC, and double-sided tape can be easily attached to the antenna body. *The antenna body is not included in the product.>> More details

<Main specifications> ・Carbon tone ・AutoExe logo included ・Made of PVC with double-sided tape ・Set of 2 left and right

■ Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details

<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included

■Air valve cap
Following the design of AutoExe wheel nuts, this product is made of aluminum with a red anodized finish, allowing you to enjoy a total coordination. The brass threads that are exposed on mass-produced plastic caps are covered to give a clean and sophisticated impression around the wheel.>> More details

<Main specifications> Aluminum, red anodized + clear coating with AutoExe logo (on both sides), set of 4

■ Sports steering wheel
A red-colored center mark with a flat bottom shape ... An airbag-compatible product that uses high-quality nappa leather as the material for outstanding sportiness.The elliptical cross-section grip with dimple processing that is not too thick and easy to grip, and the dimple-processed leather and thumb grip that improve holdability are created with details to actively enjoy driving.>> More details

<Main specifications> -Made of nappa leather-SRS airbag system / steering switch compatible-Flat bottom shape

■ Carbon paddle shift lever
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving.　>> More details

<Main specifications> ・ With AutoExe logo ・ Double-sided tape adhesive type ・ All 4 pieces configuration ・ Overall length 100mm (upper + 25mm lower + 10mm extension compared to mass production)

■ Wide rear view mirror

Frameless type designed exclusively for Mazda vehicles.The blue-coated mirror has a wide field of view up to 1.8 times wider than mass production.The radius of curvature is 3000SR, reducing the parallax with the side mirrors.Contributes to comfortable driving with little viewpoint movement.The smart fitting is attractive. >> More details

<Main specifications> ・Blue chrome surface mirror ・Viewing area about 1.8 times that of mass production ・Curvature radius 3000SR AutoExe logo included