MX-30 update information
2021-06-01New release of premier tail muffler for sedan gasoline 2WD vehicles.
To unknown performance. SUV Specialty, DR-06 for MX-30.
Are only sports cars and high-performance cars subject to tuning?Whether it's a compact car or a hybrid car, it's a common desire for car lovers to express their personality.Even more so, the Mazda MX-30, which insists on "living like me" as a new-generation SUV, can be said to be the perfect material for unique tuning.
AutoExe Options "DR-30" that draws out the potential of the MX-06 while respecting the beauty of mass production specifications.The aim is to deepen the "SUV specialty" with a novel coupe style and upgraded driving ability.First of all, the styling has a fearless appearance with a premier tail muffler with two left and right, a diffuser type under garnish, and a wing-shaped roof spoiler.The front under spoiler accented with air curtain ducts also enhances the sporty feel.
In terms of functionality, the street sports suspension kit that enhances handling accuracy, member braces, tough body reinforcement system leading to motion control beam, intake and exhaust system that improves accelerator response, brakes with excellent transient characteristics, etc. are aggressive. It leads to a ride that makes driving enjoyable.You can see, get in, run, and experience the unknown special MX-30 "DR-06".Please look forward to future developments.
Styling kit
● The tires and wheels in the photo are examples of installation.
Front under spoiler
An additional type to be attached to the mass-produced front bumper.Air curtain ducts on both sides and wedge shapes on the wing tip add graceful strength.Piano black painted.
Rear under garnish
A special diffuser design that is additionally attached to the mass-produced rear bumper.Mass-produced rear fog lamps can be installed in the center as they are.Black satin finish that does not require painting.
Muffler garnish
Dedicated garnish required when installing the premier tail muffler.The mass-produced bumper is cut and mounted to form a natural form with a sense of unity.Black satin finish that does not require painting.Cannot be installed separately.
Rear roof spoiler
A wing type that tightens the coupe style sporty.The wedge shape at the tip of the wing, which aims for total coordination with the front under spoiler, enhances the sense of dynamism.Piano black painted.
Sports side visor
A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.
DR-06 Front under spoiler dimensional drawing
The stated dimensions are the difference from the mass production bumper.Please use it as a guide when installing a styling kit such as road clearance.
Other images are[Mounting gallery]You can see from.
■ DR-06 Styling Kit For MX-30 (DR system)
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Front under spoiler | All cars | DRA1 V4 900 | ¥90,200 (¥ 82,000) | Piano black painted FRP made drilling required | D | 1.0 h |
| Rear under garnish | All cars | DRA1 V3 300 | ¥46,200 (¥ 42,000) | Black satin (no painting required) Made by AES Drilling required | D | 0.5 h |
| Muffler garnish | gasoline hybrid car | DRA1 V3 910 | ¥30,800 (¥ 28,000) | For vehicles equipped with Premier Tail Muffler (DMA2 V5 810) Cannot be installed separately AES black satin finish (no painting required) Rear bumper excision required | D | 1.0 h |
| Rear roof spoiler | All cars※ 1 | DRA1 V4 920 | ¥85,800 (¥ 78,000) | Piano black painted AutoExe ornament included FRP made drilling required | D | 1.0 h |
| Sports side visor | All cars | DRA1 V3 700 | ¥22,000 (¥ 20,000) | Smoke acrylic resin 2 piece set with ventilation mechanism | D | 0.3 h |
<For customers considering simultaneous installation when purchasing a new car>
Some styling kits and functional parts are available as Mazda dealer options.
The detail is [Accessory lineup]Also, please visit the sales staff of the sales company.
Under Garnish
Following the sporty black DR-06 styling, our new proposal is a metallic silver undergarnish that creates a powerful and active style that is typical of an SUV.It does not require painting and can be additionally attached to the front and rear mass-produced bumpers.It is an item that you can easily enjoy a makeover with impact.Choose an SUV specialty that suits your car life.
* The image is an example of installation on a XNUMX-tone color (framed top) specification car with the roof side as a metallic color.Complete a unified appearance.
Other images are[Mounting gallery]You can see from.
■ Under garnish (silver specification) For MX-30 (DR system)
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Front under garnish | All cars | DRA1 V3 290 | ¥57,200 (¥ 52,000) | Made of silver-painted ABS Drilling required | D | 0.5 h |
| Rear under garnish | All cars | DRA2 V3 300 | ¥57,200 (¥ 52,000) | Made of silver-painted ABS Drilling required | D | 0.5 h |
Functional parts
Suspension
"A New Driving Sensation" Suspension is at the core of sporty driving.Our aim is to handle at will beyond the framework of mass-produced vehicles.For drivers who want to enjoy driving positively, it is not just hard and soft, but it provides a street best ride with refined dynamic sensitivity performance such as initial response at the time of steering and transient characteristics of roll. >> Read more
A low-down spring that tightens the styling sporty and improves handling by lowering the center of gravity.Not too low, not too strong ... By keeping the vehicle height to -20mm and the spring constant to about 110%, the suspension stroke is secured even in combination with mass-produced dampers, and consideration is given so that the damping ratio does not drop too much. ing.>> More details
<Main specifications> ・ Vehicle height: -20mm ・ Spring constant isplease use this form. for more information.
The best street model that AutoExe thinks.A twin tube damper that quickly raises the damping force from the very low speed range and controls the roll speed based on dynamic Kansei engineering. Achieves linear maneuverability without compromising ride quality, such as setting the vehicle height based on -20mm.>> More details
<Main specifications> ・ Vehicle height adjustment type
When the vehicle height is down, the angle of the lower arm changes.As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect.This product corrects the arm angle when the vehicle height is lowered by adjusting the link length.Optimize the stabilizer function.>> More details
<Main specifications> ・ Full length adjustable XNUMX-piece set ・ For front
A stabilizer that connects the left and right suspension arms with a pipe and suppresses roll by the spring effect.This product has moderately strengthened spring rate from mass production.Stabilizes the posture when cornering while keeping controllability.Since the spring effect hardly occurs when going straight, the effect on the ride quality is minimal.>> More details
<Main specifications> ・ Front: Solid Φ25.0 ・ Spring constant (compared to mass-produced vehicles): 130%
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Low down spring | Gasoline hybrid 2WD vehicle ※ 1 Gasoline hybrid 4WD vehicle ※ 1 | DMA1 V5 720 DMA2 V5 720 | ¥41,800 (¥ 38,000) | Vehicle height-20mm Spring constant: Fr: 28.8 Rr: 44.6N / mm Vehicle height-20mm Spring constant: Fr: 28.8 Rr: 50.2N / mm | D | 2.5 h | |
| Street Sports Suspension Kit | gasoline hybrid car ※ 1 | MDM7850 | ¥195,800 (¥ 178,000) | Vehicle height adjustment type Damping force fixed type Spring constant: Fr: 34.3 Rr: 49.0N / mm | D | 3.2 h | |
| Adjustable stabilizer link | front | gasoline hybrid car ※ 2 | MBP7605 | ¥24,200 (¥ 22,000) | Full length adjustable left and right set of 2 | D | 0.5 h |
| Sports stabilizer | front | Gasoline hybrid/EV vehicles (excluding R-EV vehicles) | MBP7600 | ¥30,800 (¥ 28,000) | Solid φ25.0 Spring constant (compared to mass-produced vehicles) 130% | D | 2.0 h |
※ 1 When installed in a car with a 360 ° view monitor, it may be necessary to adjust the aiming of the camera.
※ 2 When installing the Street Sports Suspension Kit (MDM7850), it is not necessary to install the same product due to its functionality.
Bodysuit
In order to enhance the sense of unity between the driver and the car, tuning to train the body is the basis.By suppressing slight distortion of each part of the body due to input from the road surface such as during cornering, the movement of the suspension initial operating area absorbed by the distortion is drawn out, and handling with a direct feeling without delay of reaction from the moment when the steering is started Contribute to. >> Read more
By connecting the left and right strut towers, the body rigidity is increased.The steel oval shaft, which is advantageous in terms of rigidity, and the one-piece structure ensure the highest level of strength for a two-point system.It is effective when installed separately, but it is best to use it together with the floor crossbar and lower arm bar that are set at the same time.>> More details
<Main specifications> -Steel 2-piece structure XNUMX-point type
It suppresses distortion near the center of the body monocoque, which cannot be compensated by strut tower bars and floor crossbars, and compensates for the "annular structure" effect of the SKYACTIV body.I try to have a low center of gravity layout that does not sacrifice the leg space of the rear seats as much as possible.>> More details <Main specifications> -Steel oval shaft 1-piece configuration 4-point type
By crawling the bar on the floor, the effect is similar to that of a tower bar.There are three mounting points, such as a high-strength seat mounting part, and there is no need to drill holes in the body.There is no impact on the utility space.It is effective when used alone, but it is recommended to install it together with the strut tower bar.>> More details
<Main specifications> -Steel 2-piece structure 3-point type
In mass-produced vehicles, deformation is suppressed by connecting the bases of the left and right lower arms, which are the suspension mounting base points of the open structure, with steel oval pipes.Supports accurate handling by regulating unnecessary alignment changes.Recommended for use with strut tower bars, floor cross bars, etc.>> More details
<Main specifications> -Steel oval shaft 1-piece structure 2-point type
A tough gusset (reinforcing plate) to be attached to the torsion beam mounting parts on the left and right of the rear suspension.It suppresses unnecessary distortion of the same part that occurs when cornering, etc., and supports accurate handling.Best used with the front lower arm bar. >> More details
<Main specifications> -Steel 2-piece structure 2-point type
An evolved version of the lower arm bar.By mounting a steel frame with a three-dimensional truss structure on the body floor, the chassis rigidity of the highest level as a bolt-on part is obtained.Combined with a strut tower bar that reinforces the front and back of the upper part of the body, a tough monocoque body with two upper and lower stages is completed.Front and back set. >> More details
<Main specifications> -Steel oval shaft with all 3 pieces
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with a friction type damper with ultra-high damping, it creates a street best ride with strength and suppleness.A set of two front and back.With a dedicated mounting bracket. >> More details
<Main specifications> -Friction type damper + steel shaft Front and rear set with mounting bracket
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Strut tower bar | front | gasoline hybrid car | DMA1 V5 420 | ¥29,700 (¥ 27,000) | Steel 1-piece structure 2-point type | D | 0.5 h |
| Center floor bar | Gasoline hybrid 2WD vehicle Gasoline hybrid 4WD vehicle | MBP4D00 MBP4D10 | ¥35,200 (¥ 32,000) | Steel 1-piece structure 4-point type | D | 0.5 h | |
| Floor crossbar | rear | gasoline hybrid car | MDM4500 | ¥19,800 (¥ 18,000) | Steel 1-piece structure 3-point type | D | 0.8 h |
| Lower arm bar | front | gasoline hybrid car ※ 1 | MBP4B00 | ¥19,800 (¥ 18,000) | Steel 1-piece structure 2-point type | D | 0.5 h |
| Torsion beam stiffener | gasoline hybrid car ※ 1 | MBP4F00 | ¥17,600 (¥ 16,000) | Steel 2-piece structure 2-point type | D | 0.5 h | |
| Member brace set | gasoline hybrid car ※ 1 | MDM4700 | ¥79,200 (¥ 72,000) | Steel 3-piece structure 10-point front and rear set | D | 1.5 h | |
| Motion control beam | gasoline hybrid car | MBP4900A | ¥104,500 (¥ 95,000) | Front and rear set with friction damper + steel shaft mounting bracket | E | 1.0 h |
※ 1 The member brace set and lower arm bar / torsion beam stiffener cannot be installed at the same time.
Intake & Exhaust
In the intake / exhaust tune, which is directly linked to the pleasure of driving, the point is not to improve the peak power, but to react to instantly convey the driver's intention to the car.The accelerator response has been refined based on the air filter and muffler with moderately reduced resistance.The restrained sports sound also deepens communication between the driver and the car. >> Read more
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details
<Main specifications> ・ Dry type ・ Disposable type
Specifications that secure the maximum effective flow path area of intake air and reduce intake resistance.The material used is multi-layer polystar silicon, which has a high effect of suppressing deformation due to negative suction pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details
<Main specifications> -Made of Polystar Silicon Hose-Detailed specifications areplease use this form. for more information.
A series with a sophisticated and profound feeling. The 110X95mm oval-shaped tail end has a very mature texture.With a large-capacity straight structure silencer that has been carefully tuned for a narrow main pipe diameter and internal structure, it achieves both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise of the room. >> More details
<Main specifications> ・ Pipe diameter: Φ60.5 ・ Tail diameter: 110 × 95 × 2
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Air filter replacement | gasoline hybrid car | MBP9A10 | ¥9,350 (¥ 8,500) | Dry-type disposable (disposable) type | D | 0.3 h |
| Intake suction kit | gasoline hybrid car | MBP9610 | ¥17,600 (¥ 16,000) | Silicone hose | D | 0.3 h |
| Premier tail muffler | gasoline hybrid car | DMA2 V5 810 ※ 1 | ¥129,800 (¥ 118,000) | Stainless steel main pipe diameter φ60.5 Tail diameter 110 × 95mm (× 2) | D | 0.7 h |
| Muffler garnish (For installing the premier tail muffler) | gasoline hybrid car | DRA1 V3 910 ※ 1 | ¥30,800 (¥ 28,000) | AES black satin finish (no painting required) | D | 1.0 h |
※ 1 Cannot be installed separately.It is necessary to install the premier tail muffler (DMA2 V5 810) and muffler garnish (DRA1 V3 910) at the same time.It is necessary to cut off the rear bumper for installation.
Brake
The first thing that is required of a brake is the ability to stop safely.And in order to enjoy running freely, controllability that can decelerate at will is required.The brake pad, which has a small change in the coefficient of friction (μ) even during continuous braking, and the brace, which increases the rigidity of the pedal mounting part and eliminates the delay in effectiveness, realizes the effect of synchronizing with the driver's sensibility. >> Read more
■ Street sports brake pads
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details
<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃
■ Street brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance. >> More details
<Main specifications> ・ 6 slits on one side ・ 1 piece type
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time | |
|---|---|---|---|---|---|---|---|
| Street sports brake pads | front rear | gasoline hybrid car gasoline hybrid car | MDM5A10 MBP5A20 | ¥16,500 (¥ 15,000) ¥14,300 (¥ 13,000) | Non-asbestos rotor Appropriate temperature: 0-400 ℃ | D | 0.5 h |
| Street brake rotor | front | gasoline hybrid car | MDM5A50 | ¥46,200 (¥ 42,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
| Street brake rotor | rear | Gasoline hybrid 4WD vehicle Gasoline hybrid 2WD vehicle | MKE5A55 MBM5A55 | ¥44,000 (¥ 40,000) ¥41,800 (¥ 38,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
Engine & Drivetrain
A group of parts that draws out the full potential of the engine and converts it into traction.A sports clutch set and flywheel that support a pleasant gear change.Limited slip differential, which allows you to actively enjoy the change in the posture of the car when cornering, has created transient characteristics that eliminate sudden movements as much as possible while enhancing the direct feeling with the car.
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details
<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Sports oil filter | gasoline hybrid car | A00182 | ¥3,080 (¥ 2,800) | Built-in strong magnet Filtration area expanded by about 5% compared to mass production | D | 0.1 h |
Utility
In order to enjoy everyday driving, I want to pay attention not only to running but also to the texture and usability of the appearance.Please also pay attention to utility items with functionality not found in mass-produced cars, such as a side visor with a ventilation mechanism that tightens the style with a sporty aero form.
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details
<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo
An item that replaces the resin grip of a mass-produced oil level gauge with aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.DIY installation is possible with the attached dedicated tool. Compatible with a wide range of vehicles equipped with the SKYACTIV engine. >> More details
<Main specifications> -Aluminum-Red alumite-With AutoExe logo-Includes a dedicated tool for mounting
The resin mass-produced brake fluid tank cap has been upgraded to aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.Combined with an oil filler cap and level gauge grip with the same design, it accelerates the total coordination of the engine room. >> More details
<Main specifications> -Aluminum-Fully machined-Red alumite processing-Laser engraved AutoExe logo included
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters.>> More details
<Main specifications> -Maintenance-free type made by Optima Battery
Playful in the engine room. Made of one-piece steel designed with the image of an AutoExe strut tower bar.The bright red color and logo plate have been faithfully reproduced.>> More details
■ Aero sports wiper blade
Uses a flat type blade for the main body.By adding a deflector with fins, the arm joint is made into an aero form.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain.>> More details
<Main specifications> ・ Flat type ・ Equipped with wind deflector ・ Compatible with water-repellent glass ・ Set of 2 left and right
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details
<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 2 ・ PVC protector x 2 ・ One set
The high-pressure gas damper assists light and smooth opening and closing.Since the existing lock stay is no longer required, the maintainability of the engine room is greatly improved.Bolt-on mounting is possible with a dedicated mount bracket that minimizes the load on the bonnet and frame of the mounting part.No drilling is required.>> More details
<Main specifications> ・ High-pressure filled gas damper ・ Dedicated bracket included
A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.>> More details
<Main specifications> -Smoke type acrylic resin-Set of 2 left and right with AutoExe logo
■antenna garnish
A dress-up item that makes the mass-produced shark fin antenna look fearless with its mechanical carbon pattern and AutoExe logo. The material is flexible PVC, and double-sided tape can be easily attached to the antenna body. *The antenna body is not included in the product.>> More details
<Main specifications> ・Carbon tone ・AutoExe logo included ・Made of PVC with double-sided tape ・Set of 2 left and right
■ Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details
<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Oil filler cap | gasoline hybrid car | A1400-03 | ¥6,380 (¥ 5,800) | One-touch type Aluminum red alumite with AutoExe logo | D | 0.1 h |
| Oil level gauge grip | gasoline hybrid car | A1450-03 | ¥6,380 (¥ 5,800) | Aluminum red alumite with AutoExe logo Includes dedicated tool for mounting | D | 0.2 h |
| Brake fluid cap | All cars | A1900-03 | ¥7,480 (¥ 6,800) | Aluminum red alumite with AutoExe logo | D | 0.1 h |
| Fuel cap cover | gasoline hybrid car | A1600-03A | ¥5,280 (¥ 4,800) | ABS red painted AutoExe logo | D | 0.1 h |
| Optima battery | gasoline hybrid car | A01200 | ¥62,920 (¥ 57,200) | Maintenance-free type Color: Yellow top | F | 0.3 h |
| Battery clamp | gasoline hybrid car | A1750 | ¥8,580 (¥ 7,800) | Steel red paint with AutoExe logo | D | 0.1 h |
| Aero sports wiper blade | All cars | MDR0260 | ¥9,680 (¥ 8,800) | Flat type wind deflector equipped Water repellent glass compatible 2 left and right set | D | 0.1 h |
| Bonnet damper | gasoline hybrid car | MDM2960 | ¥27,500 (¥ 25,000) | High-pressure gas-filled damper + dedicated mounting bracket Set of 2 left and right | D | 1.0 h |
| Sports side visor | All cars | DRA1 V3 700 | ¥22,000 (¥ 20,000) | Set of 2 smoked acrylic resin with ventilation mechanism | D | 0.3 h |
| Door handle cover & protector set | All cars | DRA1 V3 110 | ¥14,630 (¥ 13,300) | Carbon-like weatherproof ABS cover x 2 PVC protector x 2 XNUMX set | D | 0.5 h |
| antenna garnish | R-EV car※ 1 | DJA1 V3 040 | ¥8,800 (¥ 8,000) | Carbon-like PVC with AutoExe logo, double-sided tape attached, left and right set of 2 | D | 0.3 h |
| Wheel nut set | All cars | C9A1 V9 770 | ¥16,280 (¥ 14,800) | Includes a dedicated adapter wrench for mounting the Heptagon type with the AutoExe logo | D | 0.3 h |
※ 1 Sensitivity may decrease depending on the reception conditions when listening to the radio.
Interior
In order to clearly convey the driver's intention to drive to the car, I would like to pay close attention to the texture and functionality of the cockpit interface.For the interior, we have prepared an airbag-compatible steering wheel that has a casual and sporty sensibility and a shift knob that pursues a stroke feeling during operation.I want you to enjoy the dialogue with the car.
A red-colored center mark with a flat bottom shape ... An airbag-compatible product with outstanding sportiness.High-quality napper leather is used as the material, and the diameter has been reduced by 7 mm from mass production.Details such as an oval cross-section grip that is not too thick and easy to grip, dimple-processed leather that enhances holdability, and a thumb grip are created to actively enjoy driving. >> More details
<Main specifications> -Made of nappa leather-SRS airbag system / steering switch compatible-Flat bottom shape
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving. >> More details
<Main specifications> ・ With AutoExe logo ・ Double-sided tape adhesive type ・ All 4 pieces configuration ・ Overall length 100mm (upper + 25mm lower + 10mm extension compared to mass production)
The size is 52mm in diameter. A spherical aluminum anodized finish that gives the cockpit a mechanical impression. When operating, push the top of the shift knob and shift the knob. It has a smart operation feel that eliminates the lock release button of mass-produced products.>> More details
<Main specifications> - Aluminum alumite finish - AutoExe logo included
Frameless type designed exclusively for Mazda vehicles.The blue-coated mirror has a wide field of view up to 1.8 times wider than mass production.The radius of curvature is 3000SR, reducing the parallax with the side mirrors.Contributes to comfortable driving with little viewpoint movement.The smart fitting is attractive. >> More details
<Main specifications> ・Blue chrome surface mirror ・Viewing area about 1.8 times that of mass production ・Curvature radius 3000SR AutoExe logo included
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Sports steering wheel | Red stitch | All cars ※ 1 | BPA1 V0 310 | ¥49,500 (¥ 45,000) | Nappa leather SRS airbag system / steering switch compatible flat bottom shape | D | 0.4 h |
| Carbon paddle shift lever | All cars | A1383-20 | ¥17,380 (¥ 15,800) | Carbon 4-piece construction with AutoExe logo | D | 0.1 h | |
| Shift knob (spherical/aluminum) | All cars | KHA1 V9 050 | ¥19,580 (¥ 17,800) | Diameter: 52mm Overall length: 77mm Push type Aluminum anodized finish AutoExe logo included | D | 0.2 h | |
| Wide rear view mirror | Vehicles equipped with automatic anti-glare rearview mirror | A1520 | ¥11,000 (¥ 10,000) | Blue chrome surface mirror Approximately 1.8 times the viewing area mass production ratio Radius of curvature 3000SR | E | 0.1 h |
Goods
Real carbon and suede-like accessories that stand out sporty.Stickers and ornaments that decorate your styling.Please enjoy the coordination with your car in every detail with your sense.
Autoclave molded dry carbon license plate frame with dramatically improved material and design.UV cut clear coat finish that suppresses deterioration due to ultraviolet rays.A stainless steel AutoExe logo plate is placed in the center. >> More details
<Main specifications> -Autoclave molded dry carbon-UV cut clear coating finish-Stainless steel AutoExe logo plate included
■carbon number bolt
High quality number bolt set using dry carbon for the plate part. Dress up your license plate smartly with the 3-piece configuration of our unique low-head stainless steel bolt/carbon washer.>> More details
<Main specifications> - Made of CFRP (logo plate part: dry carbon) - UV cut clear coating finish - Stainless steel low head bolt - AutoExe logo included - Set of 1 for 3 car
Dedicated to the new advanced key.Autoclave manufacturing method used for racing car bodies, etc. Made of dry carbon.The texture that makes the most of the texture of the material is attractive. >> More details
<Main specifications> -Made of dry carbon-With AutoExe logo-2-piece configuration-Double-sided tape adhesive type
■ Leather key holder
Just fit to the new advanced key.The outer skin is made of black cordovan, which has excellent durability.Soft red cowhide leather is used on the inside to gently wrap the smart key.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
<Main specifications> Cordovan (horse leather) Made of cowhide AutoExe/ASHFORD embossed logo
■ Fragment case
Old and new advanced keys/card type keys can be stored.Based on black cordovan, which has excellent durability, perforated leather with red permeation expresses a sporty feeling.With card storage case + key chain.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
<Main specifications> Cordovan (horse leather), cow leather, AutoExe/ASHFORD embossed logo
High-quality black suede-like that smartly stores in-vehicle documents such as vehicle verification, instruction manuals, and maintenance notes.The red stitching, which is unified to the liner inside the case, also enhances the sports mind. >> More details
<Main specifications> -Black suede tone-Red stitch-AutoExe embossed logo-Size: 245 x 180 x 65 mm
You can enjoy it with your own taste.It is also good to dress up with the demo car as a model.A lineup of high-quality AutoExe logo decorations that make you feel the commitment to driving. >> More details
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time | |
|---|---|---|---|---|---|---|---|
| Carbon number frame ※ 1 | For front license plate mounting | A1800-20 | ¥18,480 (¥ 16,800) | Made of CFRP (dry carbon) UV cut clear coating finish Comes with stainless steel AutoExe logo plate | D | 0.1 h | |
| carbon number bolt | General-purpose products (excluding character light type license plates) | C9A1 V9 760 | ¥9,350 (¥ 8,500) | Made of CFRP (logo plate part: dry carbon) UV cut clear coating finish Stainless steel low head bolts with AutoExe logo Set of 1 for 3 car | D | 0.1 h | |
| leather key holder | Vehicles equipped with the new advanced key ※ 2 | MAA0005 | ¥19,800 (¥ 18,000) | Made of cordovan (horse leather) and cowhide with AutoExe/ASHFORD embossed logo | F | - | |
| fragment case | General-purpose products | MAA0006 | ¥14,850 (¥ 13,500) | Made of cordovan (horse leather) and cowhide with AutoExe/ASHFORD embossed logo Size: 150mm x 72mm x thickness 5-15mm | F | - | |
| Carbon key cover | Vehicles equipped with the new advanced key ※ 2 | A2650-20 | ¥10,780 (¥ 9,800) | Made of CFRP (dry carbon) with AutoExe logo, 2-piece construction, double-sided tape adhesive type | D | - | |
| Car verification case | General-purpose products | A2810-33A | ¥7,480 (¥ 6,800) | Black suede-like red stitch with AutoExe logo Size: 245 x 180 x 65 mm | D | - | |
| Bright ornament | General-purpose products | A12500 | ¥5,280 (¥ 4,800) | Chrome-plated ABS resin double-sided tape adhesive type Size 155mm x 20mm | D | - | |
| ornament | General-purpose products | A12000 | ¥1,980 (¥ 1,800) | Aluminum double-sided tape adhesive type Size 120mm x 24mm | B | - | |
| Message logo sticker | General-purpose products | A11900-03 | ¥880 (¥ 800) | One-touch transfer type Size 158mm x 28mm | B | - | |
| Logo sticker (L) | General-purpose products | silver Red white | A11200-02 A11200-03 A11200-04 | ¥1,320 (¥ 1,200) | Character type without characters Size 550mm x 56mm | B | - |
| Logo sticker (S) | General-purpose products | silver Red white | A11300-02 A11300-03 A11300-04 | ¥660 (¥ 600) | Character type without characters Size 270mm x 28mm | B | - |
※ 1 This product may appear on a part of the in-vehicle monitor screen such as a car equipped with a front camera.
※ 2 The leather key holder (MAA0005) and carbon key cover (A2650-20) cannot be installed at the same time.
