The brake pedal mounting part is three-dimensionally reinforced for a direct effect.
The "brake pedal brace" is a product that focuses on the rigidity of the bracket of the brake pedal mounting part, which causes slight distortion during brake operation.Of course, the distortion is completely negligible for normal driving, but it can be said that it is a tuning that cannot be overlooked in the realization of the effect that synchronizes with the driver's sensibility.Specifically, the brake pedal bracket is three-dimensionally reinforced by sandwiching it from the left and right with a steel brace to suppress distortion in the front-back and left-right directions of the bracket.It improves the delay in reaction from when the pedal is pressed until the brakes are applied, and is effective in situations such as vehicle speed control in the city or in winding corners.It is an item that we would like you to pay attention to, along with street sports brake pads that identify the transient characteristics of μ required by sports-oriented drivers.
<Product compatibility table>
■ Brake Pedal Brace made of steel
| Car name | 適合 車 種 | part number | Tax-included price (Price without tax) | Specification. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| MAZDA2 / Demio | All DJ cars | MDJ4950 | 22,000 JPY(TAX+) (¥ 20,000) | 2-piece construction | D | 0.6 hrs |
| MAZDA3 | BP series (excluding BPFJ3R/BPFJ3P/BPEK3R/BPEP) #1 BPFJ3R, BPFJ3P, BPEK3R AT car, BPEP AT car | MBP4950 BPA1 V5 570 | 22,000 JPY(TAX+) (¥ 20,000) | 2-piece construction | D | 0.6 hrs |
| Axela | All BM series cars | MGJ4950 | 22,000 JPY(TAX+) (¥ 20,000) | 2-piece construction | D | 0.6 hrs |
| Atenza | GJ series-~ 399999 | MGJ4950 | 22,000 JPY(TAX+) (¥ 20,000) | 2-piece construction | D | 0.6 hrs |
| CX-3 | All DK series cars | MDJ4950 | 22,000 JPY(TAX+) (¥ 20,000) | 2-piece construction | D | 0.6 hrs |
| CX-5 | KF / KE AT car | MGJ4950 | 22,000 JPY(TAX+) (¥ 20,000) | 2-piece construction | D | 0.6 hrs |
| CX-60 | All KH series cars | KHA1 V5 570 | 22,000 JPY(TAX+) (¥ 20,000) | 2-piece construction | D | 0.6 hrs |
| CX-80 | All KL series cars | KHA1 V5 570 | 22,000 JPY(TAX+) (¥ 20,000) | 2-piece construction | D | 0.6 hrs |
| CX-8 | All KG series cars | MGJ4950 | 22,000 JPY(TAX+) (¥ 20,000) | 2-piece construction | D | 0.6 hrs |
*1 Installation requires one genuine stop lamp switch (BN7N-66-490A), which must be purchased separately.
