Front under spoiler

The dynamic form, incorporating a high nose and forward-swept wing tips, gives the car a powerful and elegant look. Painted in piano black. *The image is for diesel hybrid/PHEV vehicles (excluding S PACKAGE).

Front grill

A fin type with a horizontal tone that emphasizes the depth of carving.Piano black is applied to the surface, matte black paint is applied to the concave part, and the Mazda emblem is traded in.

Side under spoiler

The side view is tightened, resulting in a more complete styling. Painted in piano black. Equipped with AutoExe ornaments on both sides.

Rear side cowl

Designed with the motif of ducts provided on the left and right of the premium grade front bumper.Gives the rear view a sporty and unified accent.
(Available in Rhodium White Premium M/Soul Red Crystal M/Machine Gray Premium M painted versions)

Rear under garnish

Diffuser design with a special mesh specification to be attached to the rear bumper.Tighten the rear view with the rear roof spoiler.

Rear roof spoiler

Glossy piano black specifications.The wing-type design full of sports mind gives the rear view a powerful impression.

Sports side visor

Equipped with a ventilation mechanism that exhausts indoor air using running wind.Don't miss the aero form that tightens the side view sporty.

Sports muffler/muffler garnish

A form full of unity with a muffler with 4 left and right and a special garnish.Comfortable sports sound and light accelerator response are attractive.

Styling kit dimensions

Please use this as a guide when installing the styling kit, such as for road clearance.

■ Lowdown spring
A low-down spring that tightens the styling in a sporty way and improves handling by lowering the center of gravity.Not too low, not too strong...The vehicle height is -25mm, and the increase in spring constant is kept to the minimum necessary to ensure the suspension stroke even in combination with mass-produced dampers, creating a ride that suppresses the feeling of pushing up. It is crowded.>> More details

<Main specifications> ・ Vehicle height: -25mm ・ Spring constant is for more information.

■Street Sports Suspension Kit
The best street model that AutoExe considers. A twin tube damper based on dynamic sensitivity engineering that quickly builds up damping force from very low speed ranges and controls roll speed. The vehicle height is set to -25mm, which improves ride comfort and provides linear maneuverability.>> More details

<Main specifications> Full-length vehicle height adjustable twin tube damper ・Dedicated spring ・Spring constant Fr:56.8N/mm Rr:55.9N/mm ・Recommended vehicle height -25mm

■Adjustable stabilizer link (front)
When the vehicle height is lowered, the angle of the lower arm changes. As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect. This product shortens the link length and corrects the arm angle when the vehicle height is lowered. Optimize the stabilizer function.>> More details

<Main specifications> - Full length non-adjustable (fixed type) - Set of 2

■Adjustable stabilizer link(rear)
When the vehicle height is down, the angle of the lower arm changes.As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect.This product corrects the arm angle when the vehicle height is lowered by adjusting the link length.Optimize the stabilizer function.>> More details

<Main specifications>・Full length adjustable type・Set of 2

■ Sports stabilizer
A stabilizer that connects the left and right suspension arms with a pipe and suppresses roll by the spring effect.From mass production, the spring constant has been strengthened by 121% at the front and 128% at the rear.Stabilizes the posture when cornering while keeping controllability.Since the spring effect hardly occurs when going straight, the effect on the ride quality is minimal.>> More details

<Main specifications>・Front: Hollow φ35.0 Dedicated rubber mount/bracket included Spring constant 121% ・Rear: Solid φ24.0 Dedicated mount rubber mount included Spring constant 128%

■ Strut tower bar
For the CX-60, which has limited space and structure, the main bar is mounted on the front frame, and the suspension tower is connected three-dimensionally with a gusset plate.Although it is a split structure, it directly suppresses the stress that escapes from the joint and the distortion of the suspension tower, ensuring rigidity comparable to the welded integrated type.It is best to use it in combination with a floor crossbar.>> More details

<Main specifications> -Steel 5-piece structure 4-point type

■ Center floor bar
It suppresses distortion near the center of the body monocoque, which cannot be compensated by strut tower bars and floor crossbars, and compensates for the "annular structure" effect of the SKYACTIV body.I try to have a low center of gravity layout that does not sacrifice the leg space of the rear seats as much as possible.>> More details

<Main specifications> -Steel oval shaft 1-piece configuration 4-point type

■ Floor crossbar
Rear version of the strut tower bar.By connecting the left and right sides of the rear suspension tower and running the bar on the floor, it exerts a reinforcing effect without sacrificing the impact on the utility space as much as possible.I would like to recommend simultaneous mounting with a strut tower bar etc.>> More details

<Main specifications> -Steel 3-piece structure 2-point type

■ Lower arm bar (front)
The center of the front lower arm rear pivot, where stress is concentrated during driving, is connected with a steel oval pipe to suppress deformation.Supports accurate handling by regulating unnecessary alignment changes.Mass-produced undercovers can be used together without processing.>> More details

<Main specifications> -Steel 1-piece structure 2-point type

■ Lower arm bar (rear)
The lower arm attachment part of the mass-produced rear cross member has a closed structure, making it difficult to distort.This product has a structure that suppresses deformation of the cross member itself by connecting the pivot part of the toe control link, which has an open structure in mass production, to the left and right.>> More details

<Main specifications> -Steel 1-piece structure 2-point type

■ Member brace set
An evolved version of the lower arm bar.By mounting a steel frame with a three-dimensional truss structure on the body floor, the chassis rigidity of the highest level as a bolt-on part is obtained.Combined with a strut tower bar that reinforces the front and back of the upper part of the body, a tough monocoque body with two upper and lower stages is completed.Front and back set.>> More details

<Main specifications> -Steel oval shaft front and rear 7-piece structure-Weight: 9.5 kg

■ Motion control beam
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with an ultra-high damping friction type damper, it creates a street-best ride with strength and suppleness.A set of two front and back.>> More details

<Main specifications> ・ Friction type damper + steel shaft ・ With special mounting bracket

■Air filter replacement
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details

<Main specifications> ・ Dry type ・ Disposable type

■Ram air intake system
It consists of a semi-open type real carbon cleaner box with a specially designed intake path and a special cylindrical filter.Fresh air is actively introduced from two locations, the mass-produced intake duct that introduces air from the rear of the front grill and the box opening.It increases the amount of intake air to promote fuel injection and obtains power and torque from the normal range.The dry sports sound that excites driving is also attractive.>> More details

<Main specifications> ・Carbon box with special air filter included

■Intake suction kit
Specifications that secure the maximum effective flow path area of ​​intake air and reduce intake resistance.The material used is multi-layer polystar silicon, which has a high effect of suppressing deformation due to negative suction pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details　

<Main specifications> ・ Made of 4-layer polystar silicon

■ Sports muffler(for diesel hybrid/diesel vehicles)
Rear exhaust left and right 4 tail specifications to be installed at the same time as the exclusive muffler garnish.In terms of function, the highest priority is given to improving exhaust efficiency, and the multi-stage expansion type used in mass-produced vehicles has been changed to a straight structure to reduce back pressure loss.Examine the pipe layout and silencer capacity, etc., and get an agile response.By silencing without using glass wool, we have created a sports sound that is clear and well-defined even in the upper register.>> More details　

<Main specifications> ・Pipe diameter φ60.5 ・Tail diameter 80mm (×4)
* Must be installed at the same time as the muffler garnish.

■Sports muffler (for gasoline vehicles)
Rear exhaust left and right 4 tail specifications to be installed at the same time as the exclusive muffler garnish.In terms of functionality, the internal pipes are arranged in parallel with a punching structure exclusively for gasoline vehicles, and a straight structure silencer that silences sound waves by interfering with sound waves is adopted.By silencing without using glass wool, we have created a sports sound that is clear and well-defined even in the upper register.>> More details　

<Main specifications> ・Pipe diameter φ60.5 ・Tail diameter 80mm (×4)
* Must be installed at the same time as the muffler garnish.

■ Sports brake line
It uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and expansion due to hydraulic pressure compared to the rubber used in mass-produced vehicles, and maintains a direct brake feel according to the pedal effort.Faithfully reproduce the hose layout similar to mass production.It is designed with safety in mind, such as a PVC coating that protects the hose from flying stones.Includes gaskets required for installation.　>> More details

<Main specifications> -Stainless steel mesh PTFE + PVC coating

■ Brake pedal brace
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details

<Main specifications> -Steel 2-piece structure

■Sports oil filter
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details

<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production

■ Fuel cap cover
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles.　>> More details

<Main specifications> ・ ABS red painted ・ With decorative cap bolt ・ With AutoExe logo ・ Double-sided tape attached ・ Fuel label / erroneous oil supply prevention reminder sticker included

■ Aero sports wiper blade
Uses a flat type blade for the main body.By adding a deflector with fins, the arm joint is made into an aero form.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain.>> More details

<Main specifications> ・ Flat type ・ Equipped with wind deflector ・ Compatible with water-repellent glass ・ Set of 2 left and right

■Sports side visor
A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.>> More details

<Main specifications> -Smoke type acrylic resin-Set of 4 left and right with AutoExe logo

■ Door handle cover & protector set
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details

<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 4 ・ PVC protector x 4 ・ One set

■Door handle protector
Made of carbon-like PVC that protects the paint around the door handle, which is easily damaged when opening and closing. The lineup includes three colors: black, silver, and red (a color similar to Soul Red Crystal Metallic) that can be selected according to the body color.>>Click here for part numbers and prices

<Main specifications> - Carbon-like AutoExe logo included - PVC double-sided tape adhesive - Left and right set - Front/rear common use (1 sets required for 2 car)

■ Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details

<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included

■ Sports steering wheel

A red-colored center mark with a flat bottom shape ... An airbag-compatible product that uses high-quality nappa leather as the material for outstanding sportiness.The elliptical cross-section grip with dimple processing that is not too thick and easy to grip, and the dimple-processed leather and thumb grip that improve holdability are created with details to actively enjoy driving.>> More details

<Main specifications> -Made of nappa leather-SRS airbag system / steering switch compatible-Flat bottom shape

■ Carbon paddle shift lever
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving.　>> More details

<Main specifications> ・ With AutoExe logo ・ Double-sided tape adhesive type ・ All 4 pieces configuration ・ Overall length 100mm (upper + 25mm lower + 10mm extension compared to mass production)

■Shift knob (spherical/aluminum)
The size is 52mm in diameter. A spherical aluminum anodized finish that gives the cockpit a mechanical impression. When operating, push the top of the shift knob and shift the knob. It has a smart operation feel that eliminates the lock release button of mass-produced products.>> More details

<Main specifications> - Aluminum alumite finish - AutoExe logo included

■ Wide rear view mirror

Frameless type designed exclusively for Mazda vehicles.The blue-coated mirror has a wide field of view up to 1.8 times wider than mass production.The radius of curvature is 3000SR, reducing the parallax with the side mirrors.Contributes to comfortable driving with little viewpoint movement.The smart fitting is attractive. >> More details

<Main specifications> ・Blue chrome surface mirror ・Viewing area about 1.8 times that of mass production ・Curvature radius 3000SR AutoExe logo included