MAZDA6 / Atenza Update Information
GJ-06
I want to be a sport in essence.
GJ-06 has a strong presence and performance.
A GJ model that continues to evolve to high quality as Mazda's flagship.But what about from the perspective of "running"?Atenza was once named after sports, and the first GG / GY had a 23Z and a derivative turbo model, and the second GH also had a running grade such as 2Z.It was full of sports taste.There may be some disagreements, but I feel that the essence that lifts the driver's feelings of enjoying driving was superior to the current car. The goal of GJ-25 was to awaken the sports DNA with a slightly diluted feeling.It is the latest version of the sports wagon / sedan that is advancing the evolution that sets it apart from mass production.
Compared to SUVs and minivans, the center of gravity is lower than that of SUVs and minivans, and in order to bring out the beauty of the base car, which is advantageous in terms of exercise performance, the suspension and tough body reinforcement parts with polished roll transient characteristics are the basics.While maintaining a flat ride that cannot be surrendered in this class, we focused on linear handling without dullness.In addition, it has a variety of menus such as the premier tail muffler that is compatible with the 2.5L gasoline turbo model.
The styling has been redesigned based on our design theme.The simple front grille and under spoiler that emphasize the originality, and the rear roof spoiler that has been redesigned exclusively for the wagon are filled with a feeling of driving.I want you to further strengthen its presence and performance.
Styling kit
WAGON attached state
SEDAN installed state
Front under spoiler
An additional type to be attached to the mass-produced front bumper.The wedge shape at the tip of the wing adds graceful strength.Piano black painted.
Front grill
A three-dimensional markless grille with piano black on the surface and matte black paint on the recesses.It supports millimeter-wave radar (SBS / MRCC) and 360 ° view monitor function.
Rear roof spoiler
Wing type that tightens the rear view.The wedge shape at the tip of the wing enhances the sense of dynamism.Painting required. Can be installed on all GJ wagons.
Sports side visor
High-performance visor with ventilation mechanism.Actively exhausts the air inside the vehicle by using the negative pressure generated during driving.At the same time, it also has the effect of preventing the ingress of rainwater.
■ For GJ-06 Styling Kit MAZDA6 (GJ)
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Front under spoiler | GJ series-400001 ~ | MGJ2160-08 | ¥93,500 (¥ 85,000) | FRP piano black painted drilling required | D | 0.8 h |
| Front grill | GJ series-400001 ~ | MGJ2520 | ¥71,500 (¥ 65,000) | Piano black / matte black 2 colors painted ABS resin ※ 1 | D | 1.0 h |
| Rear roof spoiler | Wagon | MGJ2620 | ¥66,000 (¥ 60,000) | Includes AutoExe ornament Made of FRP Painting required Drilling required | D | 1.0 h |
| Sports side visor | Wagon | MGJ0410 | ¥36,300 (¥ 33,000) | Smoke acrylic resin with ventilation mechanism 4 pieces set with plating molding | D | 0.5 h |
※ 1 A part of the front grill may be reflected on the screen of the front monitor.Also, when installed on a vehicle with a 360° view monitor, it may be necessary to adjust the aiming of the camera.
<Other Styling Kit>
Functional parts
Suspension
"A New Driving Sensation" Suspension is at the core of sporty driving.Our aim is to handle at will beyond the framework of mass-produced vehicles.For drivers who want to enjoy driving positively, it is not just hard and soft, but it provides a street best ride with refined dynamic sensitivity performance such as initial response at the time of steering and transient characteristics of roll. >> Read more
■ Lowdown spring
A low-down spring that stabilizes handling by lowering the center of gravity and gives a crisp and dynamic feeling to the styling.The vehicle height is -20 to -25 mm compared to mass-produced vehicles that ensure an appropriate stroke.By strengthening the spring rate, it is possible to fully draw out the potential of mass-produced dampers with excellent features.>> More details
<Main specifications>
・ Vehicle height: -20 to -25 mm
・ Spring constant
Diesel Car
Fr: 28.0 (25.1) Rr: 41.2 (38.8)
Gasoline car
Fr: 25.3 (22.5) Rr: 41.2 (38.8)
Unit N / mm * Normal value in parentheses
■Sports damper
Although it has the same shape as the mass-produced product, the internal piston adopts a "very low speed valve" that generates precise damping force from the moment it starts moving.It accurately controls changes in the vehicle's posture and achieves a sporty, flat and high-quality ride.It is recommended to use with genuine springs (can be used with lowdown springs). >> More details
<Main specifications> ・ Fixed gas damping force
■ Street Sports Suspension Kit
The best street model that AutoExe thinks.A twin tube damper that quickly raises the damping force from the very low speed range and controls the roll speed based on dynamic Kansei engineering. Achieves linear maneuverability without compromising ride quality, such as setting the vehicle height based on -15mm.>> More details
<Main specifications> ・ Spring constant Fr: 32.5N / mm Rr: 42.7N / mm
■ Adjustable stabilizer link
When the vehicle height is down, the angle of the lower arm changes.As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect.This product corrects the arm angle when the vehicle height is lowered by adjusting the link length.Optimize the stabilizer function.>> More details
<Main specifications> ・ Front / rear settings ・ Full length adjustable XNUMX-piece set ・ Axial mount type
■ Sports stabilizer
A stabilizer that connects the left and right suspension arms with a pipe and suppresses roll by the spring effect.This product has moderately strengthened spring rate from mass production.Stabilizes the posture when cornering while keeping controllability.Since the spring effect hardly occurs when going straight, the effect on the ride quality is minimal.>> More details
<Main specifications>
・ Front / rear settings
・ Front: Solid Φ24.0 (diesel car / 2.5L car) / Solid Φ23.0 (2.0L car)
・ Rear: Solid Φ18.0
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Low down spring | Diesel Car ※ 1 Gasoline car※ 1 | MGJ700 MGJ710 | ¥44,000 (¥ 40,000) ¥46,200 (¥ 42,000) | Vehicle height -20 to -25mm Spring constant: Fr: 28.0 Rr: 41.2N / mm Vehicle height -20 to -25mm Spring constant: Fr: 25.3 Rr: 41.2N / mm | D | 2.3 h | |
| Sports damper | All cars | MGJ7700 | ¥79,200 (¥ 72,000) | Compatible with fixed damping force mass production springs / AutoExe springs | D | 1.7 h | |
| Street Sports Suspension Kit | All cars※ 1 | MGJ7850 | ¥206,800 (¥ 188,000) | Vehicle height adjustment type Damping force fixed type Spring constant: Fr: 32.5 Rr: 42.7N / mm Vehicle height adjustment range (mm): Diesel: -5 to -25 Gasoline: -5 to -20 | D | 2.9 h | |
| Adjustable stabilizer link | front rear | All cars ※ 2 All cars | MKE7605 MKE7655 | ¥24,200 (¥ 22,000) ¥22,000 (¥ 20,000) | Full length adjustable left and right set of 2 | D | 0.5 h |
| Sports stabilizer | front | All cars ※ 3 | MGJ7600 | ¥30,800 (¥ 28,000) | Solid φ24.0 Spring constant (compared to mass-produced vehicles) 115% (diesel) 135% (gasoline) | D | 2.5 h |
| Sports stabilizer | rear | 2WD car ※ 4 4WD car ※ 5 | MBM7650 MKE7660 | ¥28,600 (¥ 26,000) | Solid φ18.0 Spring constant (compared to mass-produced vehicles) 150% Solid φ20.0 Spring constant (compared to mass-produced vehicles) 175% | D | 2.0 h |
※ 1 When installed in a car with a 360 ° view monitor, it may be necessary to adjust the aiming of the camera.
※ 2 When installing the Street Sports Suspension Kit (MGJ7850), it is not necessary to install the same product due to its functionality.
※ 3 GJ系-400001～に装着する場合、純正スタビライザープレート(KD35-34-155)×2、スタビライザーブッシュ（GHT6-34-156A）×2 別途必要。また、GJEFP/GJEFW-～399999に装着する場合、純正スタビライザーブッシュ（GHT6-34-156A）×2が別途必要。
※ 4 GJ系-400001～に装着する場合、純正スタビライザープレート(KD35-28-155)×2、スタビライザーブッシュ（B45A-28-156）×2 別途必要。またGJ系-～399999に装着する場合、純正スタビライザーブッシュ（B45A-28-156）×2が別途必要。
※ 5 GJ系-400001～に装着する場合、純正スタビライザープレート(KD35-28-155)×2、スタビライザーブッシュ（KD35-28-156D）×2 別途必要。またGJ系-～399999に装着する場合、純正スタビライザーブッシュ（KD35-28-156D）×2が別途必要。
Bodysuit
In order to enhance the sense of unity between the driver and the car, tuning to train the body is the basis.By suppressing slight distortion of each part of the body due to input from the road surface such as during cornering, the movement of the suspension initial operating area absorbed by the distortion is drawn out, and handling with a direct feeling without delay of reaction from the moment when the steering is started Contribute to. >> Read more
■ Strut tower bar
By connecting the left and right strut towers on the upper part of the suspension, the body rigidity is improved.The steel oval shaft, which is advantageous in terms of rigidity, and the one-piece structure ensure the highest level of strength for a two-point system.It is effective when installed separately, but it is best to use it together with the floor crossbar and lower arm bar that are set at the same time.>> More details
<Main specifications> -Steel 2-piece structure XNUMX-point type
■ Center floor bar
It suppresses distortion near the center of the body monocoque, which cannot be compensated by strut tower bars and floor crossbars, and compensates for the "annular structure" effect of the SKYACTIV body.I try to have a low center of gravity layout that does not sacrifice the leg space of the rear seats as much as possible.>> More details
<Main specifications> -Steel oval shaft 1-piece configuration 4-point type
■ Floor crossbar
With an extremely simple structure in which one bar crawls in the left-right direction of the floor, it has an effect similar to that of a tower bar.Since it also serves as a suspension mounting point with high strength, there is no burden on the body.There is almost no impact on the utility space.It is effective when used alone, but it is recommended to install it together with the strut tower bar.>> More details
<Main specifications> -Steel 3-piece structure XNUMX-point type
■ Lower arm bar (front)
In mass-produced vehicles, deformation is suppressed by connecting the bases of the left and right lower arms, which are the suspension mounting base points of the open structure, with steel oval pipes.Supports accurate handling by regulating unnecessary alignment changes.Recommended for use with strut tower bars, floor cross bars, etc.>> More details
<Main specifications> -Steel oval shaft 1-piece structure 2-point type
■ Lower arm bar (rear)
In mass-produced vehicles, deformation is suppressed by connecting the bases of the left and right lower arms, which are the suspension mounting base points of the open structure, with steel oval pipes.Supports accurate handling by regulating unnecessary alignment changes.Recommended for use with floor crossbars.>> More details
<Main specifications> -Steel oval shaft 1-piece structure 2-point type
■ Member brace set
An evolved version of the lower arm bar.By mounting a steel frame with a three-dimensional truss structure on the body floor, the chassis rigidity of the highest level as a bolt-on part is obtained.In combination with the tower brace that reinforces the front and back of the upper part of the body, a tough monocoque body with two upper and lower stages is completed.Front and back set.>> More details
<Main specifications> ・ Steel oval shaft 6-piece configuration
・ Weight: 7.3kg
■ Motion control beam
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with an ultra-high damping friction type damper, it creates a street-best ride with strength and suppleness.A set of two front and back.>> More details <Main specifications> ・ Friction type damper + steel shaft ・ With special mounting bracket
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Strut tower bar | front | All cars | MGJ400 | ¥29,700 (¥ 27,000) | Steel 1-piece structure 2-point type | D | 0.5 h |
| Center floor bar | 2WD car | MBM4D00 | ¥35,200 (¥ 32,000) | Steel 1-piece structure 4-point type | D | 0.5 h | |
| Floor crossbar | rear | All cars | MGJ450A | ¥19,800 (¥ 18,000) | Steel 1-piece structure 3-point type | D | 0.5 h |
| Lower arm bar | front rear | All cars ※ 5 All cars ※ 5 | MKE460 MKF4400 | ¥15,400 (¥ 14,000) | Steel 1-piece structure 2-point type | D | 0.5 h |
| Member brace set | 2WD car ※ 5 4WD car ※ 5 | MKF4700 MKF4710 | ¥83,600 (¥ 76,000) | Steel 6-piece structure 14-point front and rear set | D | 1.5 h | |
| Motion control beam | All cars | MKF4900 | ¥104,500 (¥ 95,000) | Front and rear set with friction damper + steel shaft mounting bracket | E | 1.0 h |
※ 5 The member brace set and lower arm bar cannot be installed at the same time.
Intake & Exhaust
In the intake / exhaust tune, which is directly linked to the pleasure of driving, the point is not to improve the peak power, but to react to instantly convey the driver's intention to the car.The accelerator response has been refined based on the air filter and muffler with moderately reduced resistance.The restrained sports sound also deepens communication between the driver and the car. >> Read more
■ Air filter replacement
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details
<Main specifications> ・ Dry type ・ Disposable type
■ Sports induction box
Use the air cleaner box of a mass-produced car to replace the case on the suction side.Directly guides fresh air to the air filter to improve intake efficiency.The sound also changes to sports-like.Further increase efficiency by combining with the optional K & N air filter.>> More details
<Main specifications> -Funnel type FRP frame + aluminum heat shield
■ Ram air intake system
A high-end intake system that pursues efficiency and looks.While following the basic layout of mass production that is not easily affected by the radiant heat of the radiator, the suction port area of the fresh air duct has been expanded by 50%.By combining a 3-piece duct / large cleaner box with a straight path as much as possible and a dedicated cylindrical filter, the filling efficiency corresponding to the increased air is improved.Improves power and torque from the normal range.The appearance made of real carbon is also high quality.>> More details
<Main specifications>・Carbon air duct + dedicated air filter
■ Fresh air guide
An item that supports the improvement of intake efficiency by directly capturing the running wind from the front of the vehicle body.By directly connecting the front grille to the air intake port with a dedicated air duct, fresh air is introduced into the air cleaner box while minimizing the effect of exhaust heat from radiators and the like.>> More details
<Main specifications> -Made of FRP-2-piece configuration-Red gel coat finish
■ Intake suction kit
Specifications that secure the maximum effective flow path area of intake air and reduce intake resistance.The material used is multi-layer polystar silicon or FRP pipe, which has a high effect of suppressing deformation due to suction negative pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details
<Main specifications> -Made of FRP / 4-layer polystar silicon hose-Detailed specificationsplease use this form. for more information.
■Premier tail muffler
Adopted an oval-shaped tail end that creates an adult texture.Exhaust resistance is moderately reduced by a straight structure silencer tuned exclusively for diesel / gasoline vehicles, and accelerator response from the practical range is improved.>> More details
<Main specifications> -Made of stainless steel-Detailed specifications areplease use this form. for more information.
[Sound library for audition] * You can compare it with the mass-produced muffler recorded under the same conditions.It may not be accurate due to the characteristics of the playback environment, but please watch it as a reference for changes in sound quality and volume.
■ Exhaust finisher
A finisher that is bolt-on mounted on the muffler tail end of mass-produced vehicles.The oval shape, which is composed of thick and beautiful curves, has a high fit and renews the image of a general-purpose muffler cutter.Ideal for users who want to add fashionability while maintaining the functionality and sound.>> More details
<Main specifications> -Stainless steel-Set of 95 left and right-Tail Φ80 x XNUMX oval-AutoExe logo included
| Product name | 適合 車 種 (Model list) | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Air filter replacement | Diesel car / gasoline turbo car Gasoline NA car | MKE9A00 MBL9A10 | ¥9,350 (¥ 8,500) | Dry-type disposable (disposable) type | D | 0.3 h |
| Sports induction box (No filter) | GJ series-400001-diesel vehicle GJ series-~ 399999 diesel car Gasoline NA car | MKG957 MKE957 MGJ957A | ¥38,500 (¥ 35,000) ¥38,500 (¥ 35,000) ¥38,500 (¥ 35,000) | Funnel type FRP frame + aluminum heat shield | D | 1.0 h |
| Sports induction box (With filter) | GJ series-400001-diesel vehicle GJ series-~ 399999 diesel car Gasoline NA car | MKG957X MKE957X MGJ957XA | ¥49,500 (¥ 45,000) ¥49,500 (¥ 45,000) ¥49,500 (¥ 45,000) | Funnel type FRP frame + aluminum heat shield K & N air filter included | D | 1.0 h |
| Ram air intake system | GJ series-400001-diesel vehicle GJ series-~ 399999 diesel car Gasoline 2.5L NA car Gasoline 2.0L car | GJA4 V5 900 GJA2 V5 900 MGJ9580 BMA2 V5 900 | ¥123,200 (¥ 112,000) ¥123,200 (¥ 112,000) ¥96,800 (¥ 88,000) ¥96,800 (¥ 88,000) | Carbon air duct + carbon/FRP box Dedicated air filter included Carbon air duct + carbon/FRP box Dedicated air filter included Carbon box Dedicated air filter included Carbon box Dedicated air filter included | F | 1.0 h |
| Fresh air guide | GJ series-400001 ~ ※ 6 | MGJ9B00 | ¥35,200 (¥ 32,000) | FRP 2-piece configuration Red gel coat finish | D | 1.0 h |
| Intake suction kit | Diesel Car Gasoline turbo car Gasoline 2.5L NA car Gasoline 2.0L car | MKE961 MKF9610 MGJ961 MBM961 | ¥30,800 (¥ 28,000) ¥19,800 (¥ 18,000) ¥17,600 (¥ 16,000) ¥17,600 (¥ 16,000) | FRP red gel coat finish Silicone hose / band included Silicone hose Silicone hose Silicone hose | D | 0.5 h 0.2 h 0.3 h 0.3 h |
| Premier tail muffler | GJ series-400001-diesel vehicle GJ series-~ 399999 Diesel 2WD car ※ 7 GJ series-400001-gasoline car GJ series-~ 399999 Gasoline car | MGJ8Y20 MGJ8Y00 MGJ8Y30 MGJ8Y10 | ¥118,800 (¥ 108,000) sold out. ¥140,800 (¥ 128,000) ¥140,800 (¥ 128,000) | Stainless steel main pipe diameter φ60.5 Tail diameter 110 × 95mm (× 2) | D | 0.7 h |
| Exhaust finisher | GJ series-~ 399999 | MGH8A00 | ¥38,500 (¥ 35,000) | Set of 2 with AutoExe logo for mounting genuine stainless steel muffler | D | 0.2 h |
※ 6 Installation requires removal of the top surface of the front bumper and relocation of the horn.Also, functionally, the effect of this product is minimal when the ram air intake system for gasoline vehicles (MGJ9580/BMA2 V5 900) is installed.
※ 7 The change in sound quality and volume from the genuine muffler is minimal.
Brake
The first thing that is required of a brake is the ability to stop safely.And in order to enjoy running freely, controllability that can decelerate at will is required.The brake pad, which has a small change in the coefficient of friction (μ) even during continuous braking, and the brace, which increases the rigidity of the pedal mounting part and eliminates the delay in effectiveness, realizes the effect of synchronizing with the driver's sensibility.>> Read more
■ Street sports brake pads
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details
<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃
■ Street sports brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance.>> More details
<Main specifications> ・ 6 slits on one side ・ 1 piece type
■ Brake pedal brace
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details
<Main specifications> -Steel 2-piece structure
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Street sports brake pads | front | All cars | MGJ5A10 | ¥16,500 (¥ 15,000) | Non-asbestos rotor Appropriate temperature: 0-400 ℃ | D | 0.5 h |
| Street sports brake pads | rear | GJ series 2WD vehicle (car stand number-200001 ~) / 4WD vehicle GJ series 2WD vehicle (chassis number-~ 199999) | MGJ5A21 MGJ5A20 | ¥14,300 (¥ 13,000) | Non-asbestos rotor Appropriate temperature: 0-400 ℃ | D | 0.5 h |
| Street brake rotor | front | GJ series-400001-Diesel cars, gasoline turbo cars GJ series-~ 399999 Diesel cars, gasoline NA cars | Mkg5a50 MGJ5A50A | ¥46,200 (¥ 42,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
| Street brake rotor | rear | All cars | MGJ5A55 | ¥41,800 (¥ 38,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
| Brake pedal brace | GJ series-~ 399999 | MGJ4950 | ¥19,800 (¥ 18,000) | Steel 2-piece configuration | D | 0.6 h |
Engine & Drivetrain
A group of parts that draws out the full potential of the engine and converts it into traction.A sports clutch set and flywheel that support a pleasant gear change.Limited slip differential, which allows you to actively enjoy the change in the posture of the car when cornering, has created transient characteristics that eliminate sudden movements as much as possible while enhancing the direct feeling with the car.
■ Sports oil filter
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details
<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production
■ Sports clutch line
Uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and less expansion due to hydraulic pressure than the rubber used in mass-produced vehicles.Contributes to a direct clutch feel.In addition, PVC coating is applied to protect the hose for safety. >> More details
<Main specifications> -Stainless steel mesh PTFE + PVC coating
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Sports oil filter | Gasoline car | A00182 | ¥3,080 (¥ 2,800) | Built-in strong magnet Filtration area expanded by about 5% compared to mass production | D | 0.1 h |
| Sports clutch line | GJ series 2WD MT car / GJ series-~ 399999 4WD MT car GJ series-400001-4WD MT car | MBM6500 MKF6500 | ¥11,000 (¥ 10,000) | Stainless mesh PTFE hose + PVC coating | D | 0.5 h |
Utility
In order to enjoy everyday driving, I want to pay attention not only to running but also to the texture and usability of the appearance.Please also pay attention to utility items with functionality not found in mass-produced cars, such as a side visor with a ventilation mechanism that tightens the style with a sporty aero form.
■ Oil filler cap
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details
<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo
■ Oil level gauge grip
An item that replaces the resin grip of a mass-produced oil level gauge with aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.DIY installation is possible with the attached dedicated tool. Compatible with a wide range of vehicles equipped with the SKYACTIV engine. >> More details
<Main specifications> -Aluminum-Red alumite-With AutoExe logo-Includes a dedicated tool for mounting
■ Brake fluid cap
The resin mass-produced brake fluid tank cap has been upgraded to aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.Combined with an oil filler cap and level gauge grip with the same design, it accelerates the total coordination of the engine room. >> More details
<Main specifications> -Aluminum-Fully machined-Red alumite processing-Laser engraved AutoExe logo included
■ Fuel cap cover
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles. >> More details
<Main specifications> ・ ABS red painted ・ With decorative cap bolt ・ With AutoExe logo ・ Double-sided tape attached ・ Fuel label / erroneous oil supply prevention reminder sticker included
■ Optima Battery
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters.>> More details
<Main specifications> -Maintenance-free type made by Optima Battery
■ Battery clamp
Playful in the engine room. Made of one-piece steel designed with the image of an AutoExe strut tower bar.The bright red color and logo plate have been faithfully reproduced.>> More details
<Main specifications> -Steel red paint-With AutoExe ornament
■ Aero wiper deflector set
Dedicated to CX-5 (KF) / CX-8 (KG) / Atenza (GJ series-400001 ~) equipped with top lock type wiper.A wind deflector that receives wind pressure and suppresses the lift of the blade is attached to the mass-produced wiper arm to complete the aero style.A set of 2 for the front. >> More details
<Main specifications> -Wind deflector for mounting mass-produced wiper arm 2 left and right set
■ Aero sports wiper blade
An aero type wiper blade is used for the main body.By adding a deflector with fins, the arm joint is aero-formed.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain. >> More details
<Main specifications> ・ Driver side: 600mm ・ Passenger seat side: 450mm ・ Twin rail type
■ Sports side visor
A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.>> More details
<Main specifications> -Smoke type acrylic resin-Set of 4 left and right with AutoExe logo
■ Door handle cover & protector set
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details
<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 4 ・ PVC protector x 4 ・ One set
■antenna garnish
A dress-up item that makes the mass-produced shark fin antenna look fearless with its mechanical carbon pattern and AutoExe logo. The material is flexible PVC, and double-sided tape can be easily attached to the antenna body. *The antenna body is not included in the product.>> More details
<Main specifications> ・Carbon tone ・AutoExe logo included ・Made of PVC with double-sided tape ・Set of 2 left and right
■ Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details
<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Oil filler cap | All cars | A1400-03 | ¥6,380 (¥ 5,800) | One-touch type Aluminum red alumite with AutoExe logo | D | 0.1 h |
| Oil level gauge grip | Diesel / Gasoline NA car Gasoline turbo car | A1450-03 A1451-03 | ¥6,380 (¥ 5,800) sold out. | Aluminum red alumite with AutoExe logo Dedicated tool for mounting included | D | 0.2 h |
| Brake fluid cap | All cars | A1900-03 | ¥7,480 (¥ 6,800) | Aluminum red alumite with AutoExe logo | D | 0.1 h |
| Fuel cap cover | All cars | A1600-03A | ¥5,280 (¥ 4,800) | ABS red painted decorative cap with bolt AutoExe logo | D | 0.1 h |
| Optima battery | GJ series-~ 399999 diesel car GJ series-400001-Diesel / gasoline vehicles | A01100 A01200 | ¥80,300 (¥ 73,000) ¥62,920 (¥ 57,200) | Color: Yellow Top | F | 0.3 h |
| Battery clamp | All cars | A1700 | ¥7,480 (¥ 6,800) | Steel red paint with AutoExe logo | D | 0.1 h |
| Aero wiper deflector set | GJ series-400001 ~ | MKF0240 | ¥6,380 (¥ 5,800) | Wind deflector for mass production wiper arm mounting Left and right 2 pcs set | D | 0.1 h |
| Aero sports wiper blade | GJ series-~ 399999 | MKE0250 | ¥9,680 (¥ 8,800) | Equipped with a large wind deflector Water repellent glass compatible Front left and right set of 2 | D | 0.1 h |
| Sports side visor | Wagon | MGJ0410 | ¥36,300 (¥ 33,000) | Smoke acrylic resin with ventilation mechanism 4 pieces set with plating molding | D | 0.5 h |
| Door handle cover & protector set | All cars | KFA1 V3 110 | ¥29,260 (¥ 26,600) | Carbon-like weatherproof ABS cover x 4 PVC protector x 4 XNUMX set | D | 1.0 h |
| antenna garnish | GJ series-300001~Wagon ※ 1 | DJA1 V3 040 | ¥8,800 (¥ 8,000) | Carbon-like PVC with AutoExe logo, double-sided tape attached, left and right set of 2 | D | 0.3 h |
| Wheel nut set | All cars | C9A1 V9 770 | ¥16,280 (¥ 14,800) | Includes a dedicated adapter wrench for mounting the Heptagon type with the AutoExe logo | D | 0.3 h |
※ 1 Sensitivity may decrease depending on the reception conditions when listening to the radio.
Interior parts
In order to clearly convey the driver's intention to drive to the car, I would like to pay close attention to the texture and functionality of the cockpit interface.For the interior, we have prepared an airbag-compatible steering wheel that has a casual and sporty sensibility and a shift knob that pursues a stroke feeling during operation.I want you to enjoy the dialogue with the car.
■Carbon paddle shift lever
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving. >> More details
<Main specifications> ・ With AutoExe logo ・ Double-sided tape adhesive type ・ All 4 pieces configuration ・ Overall length 100mm (upper + 25mm lower + 10mm extension compared to mass production)
■ Shift knob (spherical shape / genuine leather)
Designed exclusively for straight AT vehicles, with a focus on the stroke feeling when the shift lock is released.The clean appearance and operability of mass-produced products without the unlock button are attractive.Push the upper end of the shift knob during operation.Shift the knob as it is.>> More details
<Main specifications> -For AT cars (straight type) -Made of genuine leather-Weight: 130g
■ Shift knob (spherical shape / genuine leather)
Made of genuine leather with a diameter of 51 mm with an emphasis on operability.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.AutoExe logo on the top.>> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
■ Shift knob (genuine leather)
Small diameter size with a diameter of 42 mm.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.Two types of stitches, red stitch and black stitch, can be selected.AutoExe logo on the top. >> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
■ Wide rear view mirror
Frameless type designed exclusively for Mazda vehicles.The blue-coated mirror has a wide field of view up to 1.8 times wider than mass production.The radius of curvature is 3000SR, reducing the parallax with the side mirrors.Contributes to comfortable driving with little viewpoint movement.The smart fitting is attractive. >> More details
<Main specifications> ・Blue chrome surface mirror ・Viewing area about 1.8 times that of mass production ・Curvature radius 3000SR AutoExe logo included
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Carbon paddle shift lever | Vehicles equipped with steering shift switch | A1382-20 | ¥16,280 (¥ 14,800) | Carbon 4-piece construction with AutoExe logo | D | 0.1 h | |
| Shift knob (spherical shape / genuine leather) | Red stitch | AT car (GJ series-200001 ~ / 4WD car) MT car AT car (GJ series 2WD- ~ 199999) | A1350B-03 A1341-03 A1342-03 | ¥19,580 (¥ 17,800) ¥9,900 (¥ 9,000) ¥9,900 (¥ 9,000) | Diameter: 51mm Overall length: 85mm Adjustable weight: 130g Push type Screw diameter: M10 x 1.25 Diameter: 51mm Overall length: 70-88mm Adjustable weight: 190g Screw diameter: M8 x 1.25 Diameter: 51mm Overall length: 70-80mm Adjustable weight: 190g | D | 0.2 h 0.1 h 0.1 h |
| Shift knob (genuine leather) | Red stitch | MT car AT car (GJ series 2WD- ~ 199999) | A1396-03 A1397-03 | ¥9,680 (¥ 8,800) | Screw diameter: M10 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable weight: 190g Screw diameter: M8 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable weight: 190g | D | 0.1 h |
| Shift knob (genuine leather) | Black stitch | MT car | A1396-08 | ¥9,680 (¥ 8,800) | Screw diameter: M10 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable weight: 190g Screw diameter: M8 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable weight: 190g | D | 0.1 h |
| Wide rear view mirror | Vehicles equipped with automatic anti-glare rearview mirror (frameless) | A1520 | ¥11,000 (¥ 10,000) | Blue chrome surface mirror Approximately 1.8 times the viewing area mass production ratio Radius of curvature 3000SR | E | 0.1 h |
Goods
Real carbon and suede-like accessories that stand out sporty.Stickers and ornaments that decorate your styling.Please enjoy the coordination with your car in every detail with your sense.
■ Carbon number frame
Autoclave molded dry carbon license plate frame with dramatically improved material and design.UV cut clear coat finish that suppresses deterioration due to ultraviolet rays.A stainless steel AutoExe logo plate is placed in the center. >> More details
<Main specifications> -Autoclave molded dry carbon-UV cut clear coating finish-Stainless steel AutoExe logo plate included
■carbon number bolt
High quality number bolt set using dry carbon for the plate part. Dress up your license plate smartly with the 3-piece configuration of our unique low-head stainless steel bolt/carbon washer.>> More details
<Main specifications> - Made of CFRP (logo plate part: dry carbon) - UV cut clear coating finish - Stainless steel low head bolt - AutoExe logo included - Set of 1 for 3 car
■ Leather key holder
Just fit to the new advanced key.The outer skin is made of black cordovan, which has excellent durability.Soft red cowhide leather is used on the inside to gently wrap the smart key.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
<Main specifications> Cordovan (horse leather) Made of cowhide AutoExe/ASHFORD embossed logo
■ Fragment case
Old and new advanced keys/card type keys can be stored.Based on black cordovan, which has excellent durability, perforated leather with red permeation expresses a sporty feeling.With card storage case + key chain.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
<Main specifications> Cordovan (horse leather), cow leather, AutoExe/ASHFORD embossed logo
■ Carbon key cover
Dedicated to the new advanced key.Autoclave manufacturing method used for racing car bodies, etc. Made of dry carbon.The texture that makes the most of the texture of the material is attractive. >> More details
<Main specifications> -Made of dry carbon-With AutoExe logo-2-piece configuration-Double-sided tape adhesive type
■key case
A high-quality black suede-like key case compatible with conventional advanced keys.A cover type that firmly protects the key body from scratches and impacts.Red stitching and red lines give a sporty and delicate impression. >> More details
<Main specifications> ・ Black suede tone ・ Red stitch ・ With AutoExe logo
■ Car verification case
High-quality black suede-like that smartly stores in-vehicle documents such as vehicle verification, instruction manuals, and maintenance notes.The red stitching, which is unified to the liner inside the case, also enhances the sports mind. >> More details
<Main specifications> -Black suede tone-Red stitch-AutoExe embossed logo-Size: 245 x 180 x 65 mm
■ Ornaments / stickers
You can enjoy it with your own taste.It is also good to dress up with the demo car as a model.
A lineup of high-quality AutoExe logo decorations that make you feel the commitment to driving. >> More details
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time | |
|---|---|---|---|---|---|---|---|
| Carbon number frame ※ 1 | For front license plate mounting | A1800-20 | ¥18,480 (¥ 16,800) | Made of CFRP (dry carbon) UV cut clear coating finish Comes with stainless steel AutoExe logo plate | D | 0.1 h | |
| carbon number bolt | General-purpose products (excluding character light type license plates) | C9A1 V9 760 | ¥9,350 (¥ 8,500) | Made of CFRP (logo plate part: dry carbon) UV cut clear coating finish Stainless steel low head bolts with AutoExe logo Set of 1 for 3 car | |||
| leather key holder | Vehicles equipped with the new advanced key ※ 2 | MAA0005 | ¥19,800 (¥ 18,000) | Made of cordovan (horse leather) and cowhide with AutoExe/ASHFORD embossed logo | F | - | |
| fragment case | General-purpose products | MAA0006 | ¥14,850 (¥ 13,500) | Made of cordovan (horse leather) and cowhide with AutoExe/ASHFORD embossed logo Size: 150mm x 72mm x thickness 5-15mm | F | - | |
| Carbon key cover | Vehicles equipped with the new advanced key ※ 2 | A2650-20 | ¥10,780 (¥ 9,800) | Made of CFRP (dry carbon) with AutoExe logo, 2-piece construction, double-sided tape adhesive type | D | - | |
| key case | Vehicles equipped with advanced keys | A2640-33 | ¥4,180 (¥ 3,800) | Black suede-like red stitching with AutoExe logo.Size: 95mm x 45mm x 20mm | D | - | |
| Car verification case | General-purpose products | A2810-33A | ¥7,480 (¥ 6,800) | Black suede-like red stitch with AutoExe logo Size: 245 x 180 x 65 mm | D | - | |
| Bright ornament | General-purpose products | A12500 | ¥5,280 (¥ 4,800) | Chrome-plated ABS resin double-sided tape adhesive type Size 155mm x 20mm | D | - | |
| ornament | General-purpose products | A12000 | ¥1,980 (¥ 1,800) | Aluminum double-sided tape adhesive type Size 120mm x 24mm | B | - | |
| Message logo sticker | General-purpose products | A11900-03 | ¥880 (¥ 800) | One-touch transfer type Size 158mm x 28mm | B | - | |
| Logo sticker (L) | General-purpose products | silver Red white | A11200-02 A11200-03 A11200-04 | ¥1,320 (¥ 1,200) | Character type without characters Size 550mm x 56mm | B | - |
| Logo sticker (S) | General-purpose products | silver Red white | A11300-02 A11300-03 A11300-04 | ¥660 (¥ 600) | Character type without characters Size 270mm x 28mm | B | - |
※ 1 This product may appear on a part of the in-vehicle monitor screen such as a car equipped with a front camera.
※ 2 The leather key holder (MAA0005) and carbon key cover (A2650-20) cannot be installed at the same time.
MAZDA6 / Atenza (GJ) Parts impression
We are posting the raw voice of the customer who is actually wearing it.
Please refer to the car personalization project.
Stable and easy to bend.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- Suspension
A sense of security when driving through or changing lanes at high speed.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- Suspension
I like the red visible from the front grill.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- Intake and exhaust system
Solid construction.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- ス タ イ リ ン グ,ボ デ ィ,Intake and exhaust system
The body does not twist and is easy to run.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- ボ デ ィ
The sound quality became low and thick.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- Intake and exhaust system
Differentiation in a good way.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- ス タ イ リ ン グ
Improved response.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- Intake and exhaust system
There is impact in simplicity.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- ス タ イ リ ン グ
Even just turning at one intersection is fun.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- ボ デ ィ
Recommended for those who often open the hood.
- Impressions by vehicle type
- MAZDA6/Atenza
- Impressions by parts
- ー ー テ ィ リ テ テ ー ー
