GH-03B
Performance that lives in calmness.
Train saloons and wagons.
I want to make a sensible sedan or wagon into a high-potential one that is as thin as a sports car.Total tune from body reinforcement and suspension to intake and exhaust and brakes to raise the roll rigidity of mass-produced vehicles to a high level.
The front bumper and grille with large air intakes and the premier tail muffler express the ambition of an adult.The good news is that most parts can be selected before and after minor changes, regardless of body type.
Styling kit
SPORT installed state
SPORT WAGON installed
For Atenza (GH series)
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Front bumper & grill | All cars * 1 * 2 | MGA2000 | ¥71,500 (¥ 65,000) | FRP paint required Genuine fog lamp Tow hitch cannot be installed Genuine parking sensor can be installed Cannot be installed on vehicles equipped with millimeter wave radar (MRCC) | D | 1.3 h |
| Front grill | All cars | MGA2500 | ¥30,800 (¥ 28,000) | FRP paint required Cannot be installed on vehicles equipped with millimeter-wave radar (MRCC) for genuine bumper installation | D | 0.5 h |
※ 2 マイナーチェンジ前(GH系～-199999)のセダン全車およびスポーツワゴン(20F/20C/25C)への装着する場合､純正フォグランプ (GDK5-51-680/GDK5-51-690)×各1とマッドガード(GAA9-56-130J/GAA9-56-140J)×各1が別途必要｡
GH-03
Powerful styling for a more original look.Europe-oriented driving to the height that is comparable to pure sports. The GH-03 uses a front bumper and grille that creates a more dynamic character line from the front fenders and has an air intake that burns into your eyes.It is accelerating boldly enough to overlook the originality of Atenza, which insists on aesthetics originating in Japan.
Styling kit
SPORT installed state
SPORT WAGON installed
● The stainless muffler dual in the photo is no longer available.
For Atenza (GH series)
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Front bumper & grill | All cars * 1 * 2 | MGH2000 | sold out. | Made of FRP Paint required Genuine fog lamp Genuine parking sensor cannot be installed Can not be installed on vehicles equipped with millimeter wave radar (MRCC) Tow hitch cannot be installed | D | 1.3 h |
| Front grill | All cars | MGH2500 | ¥30,800 (¥ 28,000) | FRP paint required Cannot be installed on vehicles equipped with millimeter-wave radar (MRCC) for genuine bumper installation | D | 0.5 h |
※ 2 マイナーチェンジ前(GH系～-199999)のセダン全車およびスポーツワゴン(20F/20C/25C)への装着する場合､純正マッドガード (GAA9-56-130J/GAA9-56-140J)×各1が別途必要｡
Functional parts
▶Body Parts
In order to enhance the sense of unity between the driver and the car, tuning to train the body is the basis.By suppressing slight distortion of each part of the body due to input from the road surface such as during cornering, the movement of the suspension initial operating area absorbed by the distortion is drawn out, and handling with a direct feeling without delay of reaction from the moment when the steering is started Contribute to. >> Read more
By mounting a steel frame with a three-dimensional truss structure on the body floor in a well-balanced manner, the chassis rigidity of the highest level as a bolt-on part is obtained.Bring out the potential of the suspension.In combination with the tower brace that reinforces the front and back of the upper part of the body, a tough monocoque body with two upper and lower stages is completed. For 3WD vehicles only. >> More details
<Main specifications> -Steel 3-piece configuration-Weight: 9.6 kg
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Member brace set | 2.5L 2WD car | MGH470 | ¥63,800 (¥ 58,000) | Steel 4-piece structure 10-point front and rear set | D | 1.5 h |
▶Intake & Exhaust Parts
In the intake / exhaust tune, which is directly linked to the pleasure of driving, the point is not to improve the peak power, but to react to instantly convey the driver's intention to the car.The accelerator response has been refined based on the air filter and muffler with moderately reduced resistance.The restrained sports sound also deepens communication between the driver and the car. >> Read more
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details
A fresh air duct is newly installed by eliminating the muffling resonator that becomes intake resistance.The ram pressure effect is demonstrated by capturing the running wind directly from the front bumper opening.The synergistic effect with the dedicated K & N wet filter improves the suction flow rate and improves the filling efficiency.The introduction route is completely cut off from the engine room.The heat shield effect is also perfect.>> More details
| Product name | 適合 車 種 (Model list) | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Air filter replacement | All cars | MGH9A00 | ¥9,350 (¥ 8,500) | Dry-type disposable (disposable) type | D | 0.3 h | |
| Ram air intake system | 2.5L 2WD car | GHA1 V5 900 | ¥107,800 (¥ 98,000) | Carbon box Dedicated air filter included | F | 1.0 h | |
| Exhaust finisher | All cars | MGH8A00 | ¥38,500 (¥ 35,000) | Set of 2 with AutoExe logo for mounting genuine stainless steel muffler | D | 0.2 h |
▶brake parts
The first thing that is required of a brake is the ability to stop safely.And in order to enjoy running freely, controllability that can decelerate at will is required.The brake pad, which has a small change in the coefficient of friction (μ) even during continuous braking, and the brace, which increases the rigidity of the pedal mounting part and eliminates the delay in effectiveness, realizes the effect of synchronizing with the driver's sensibility. >> Read more
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance.>> More details
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Street sports brake pads | front | Vehicle with genuine 18-inch wheels Vehicles with genuine 17/16 inch wheels | MGS5A10 MGH5A10 | ¥16,500 (¥ 15,000) | Non-asbestos rotor Appropriate temperature: 0-400 ℃ | D | 0.5 h |
| Street sports brake pads | rear | Vehicle with genuine 18-inch wheels Vehicles with genuine 17/16 inch wheels | MGS5A20 MFD5A20 | ¥14,300 (¥ 13,000) | Non-asbestos rotor Appropriate temperature: 0-400 ℃ | D | 0.5 h |
| Street brake rotor | front | Vehicle with genuine 18-inch wheels Vehicles with genuine 17/16 inch wheels | MGS5A50 MGH5A50 | ¥46,200 (¥ 42,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
| Street brake rotor | rear | Vehicle with genuine 18-inch wheels Vehicles with genuine 17/16 inch wheels | MGS5A55 MGH5A55 | ¥44,000 (¥ 40,000) ¥41,800 (¥ 38,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
▶ Utlity Parts
In order to enjoy everyday driving, I want to pay attention not only to running but also to the texture and usability of the appearance.Please also pay attention to utility items with functionality not found in mass-produced cars, such as a side visor with a ventilation mechanism that tightens the style with a sporty aero form.
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters.>> More details
An aero type wiper blade is used for the main body.By adding a deflector with fins, the arm joint is aero-formed.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain. >> More details
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details
<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Oil filler cap | All cars | A1400-03 | ¥6,380 (¥ 5,800) | One-touch type Aluminum red alumite with AutoExe logo | D | 0.1 h |
| Optima battery | All cars | A01500 | ¥56,320 (¥ 51,200) | Maintenance-free type Color: Red top | F | 0.3 h |
| Aero sports wiper blade | All cars | MGH0250 | ¥9,680 (¥ 8,800) | Equipped with wind deflector Water repellent glass compatible 2 left and right set | D | 0.1 h |
| Wheel nut set | All cars | C9A1 V9 770 | ¥16,280 (¥ 14,800) | Includes a dedicated adapter wrench for mounting the Heptagon type with the AutoExe logo | D | 0.3 h |
▶Interior parts
In order to clearly convey the driver's intention to drive to the car, I would like to pay close attention to the texture and functionality of the cockpit interface.For the interior, we have prepared an airbag-compatible steering wheel that has a casual and sporty sensibility and a shift knob that pursues a stroke feeling during operation.I want you to enjoy the dialogue with the car.
Made of genuine leather with a diameter of 51 mm with an emphasis on operability.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.AutoExe logo on the top.>> More details
Small diameter size with a diameter of 42 mm.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.Two types of stitches, red stitch and black stitch, can be selected.AutoExe logo on the top. >> More details
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Shift knob (spherical shape / genuine leather) | Red stitch | MT car AT car | A1341-03 A1342-03 | ¥9,900 (¥ 9,000) | Screw diameter: M10 x 1.25 Diameter: 51mm Overall length: 70-88mm Adjustable Screw diameter: M8 x 1.25 Diameter: 51mm Overall length: 70-80mm Adjustable | D | 0.1 h |
| Shift knob (genuine leather) | Red stitch Red stitch Black stitch | MT car AT car MT car | A1396-03 A1397-03 A1396-08 | ¥9,680 (¥ 8,800) ¥9,680 (¥ 8,800) ¥9,680 (¥ 8,800) | Screw diameter: M10 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable Screw diameter: M8 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable Screw diameter: M10 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable | D | 0.1 h |
