Body

2025-10-28CX-5Kotaro NISHIOKA

Rear floor cross bar installation

Installed Parts: Floor Crossbars Impressions I had a tower bar installed, but I didn't notice any improvement in handling when driving around town (I did notice it on mountain passes). As for the rear parts, they clearly slowed down when turning left and right at high speeds, even when driving around town.

2025-10-28MAZDA3 / AxelaImpression User

MAZDA3 Sedan x AutoExe parts are a good fit for me

Installed parts: Strut tower bar, floor crossbar, motion control beam, intake suction kit, air filter replacement, premium tail muffler, oil filler cap, sports radiator cap, oil level indicator […]

2025-10-24CX-8Impression User

Aero wiper deflector set

Installed Parts: Aero Wiper Deflector Set Impressions: Not only does it improve the appearance of the wipers, it also reduces wind noise, making it a worthwhile addition. I've driven a lot since installing it, and it's in good condition with no rattles or fading. [...]

2025-10-24MAZDA2 / DemioImpression User

MAZDA 2 DJLFS Taiwan

Strut Tower Bar Installation Impressions: The relative roll during use is significantly reduced, and the vibration of the shock absorber while driving is also significantly reduced. This is an excellent modification product, supporting the left and right sides like a reinforcement for the body, and is resistant to deformation. Taiwan […]

2025-10-21CX-5Impression User

Good car

Installed parts: Lowering springs, adjustable stabilizer link, sports tie rod end, intake suction kit, air filter replacement, premium tail muffler, strut tower bar, bonnet damper […]

2025-10-21CX-5Impression User

Strut tower bar installed

Installed Parts Strut Tower Bar Impressions It's been over six months since I installed the strut tower bar, and although the front end has become stiffer, I feel that it has reduced lateral sway over bumps in the road and improved steering response in curves. The engine bay is also beautiful. […]

2025-10-21MAZDA6/AtenzaImpression User

Inexpensive body reinforcement

Installed Parts: Strut Tower Bar Impressions I installed a strut tower bar because I thought it would be an inexpensive way to strengthen my car. It feels like the car is a little less shaky when turning or going through intersections, but I'm not entirely satisfied with the installation.

2025-10-21RoadsterImpression User

LED rear combination light

Installed Parts LED Rear Combination Light Impressions I like the stock taillights, but I also liked the smoked taillights, so I replaced them. They are OEM Valenti products, but the AutoExe ones have a more emphasized red line and […]

2025-10-21MAZDA6/AtenzaImpression User

Easily lift a heavy hood

Installed Parts: Bonnet Damper Impressions: Every time I open the hood, it feels really heavy, but with the power of the damper, it opens easily. The red damper works hard every time I open it for a car wash or maintenance. Kuma-san, Tokyo […]

2025-10-21CX-5Impression User

Installation of intake and exhaust systems

Installed parts: Center floor bar, floor cross bars, Premier tail muffler, Ram air intake system, fresh air guide, intake suction kit, oil level gauge grip, oil filler cap, brake pedal brake […]

2025-10-21RoadsterImpression User

Tower bar

Installed Parts: Strut Tower Bar Impressions: The body rigidity has clearly increased, and the car's behavior in tight corners has become more stable, with no unpleasant creaking or squealing. Popper Fan, Tokyo, Car: Roadster, Model: NC […]

2025-10-17RoadsterImpression User

Motion control beam and shift knob

Installed parts: Motion Control Beam, Shift Knob (Stick Shape, Gray Stitching) Impressions: Motion Control Beam: When installed, the body's twisting and flexing is so small that it can be felt, and it feels smooth.

2025-10-17MAZDA3 / AxelaImpression User

It's easy to open the bonnet

Installed Parts: Bonnet Damper Impressions I saw a video on YouTube of someone installing one and wanted one myself, so I installed one. Even though it's so thin, I just need to release the hood lock, lift it up a little, and let go, and the heavy hood opens up completely. […]

2025-10-14MAZDA3 / AxelaImpression User

Dress up a little

Installed Parts: Carbon Number Plate Frame, Rear Side Cowl, AutoExe x Made by Fressko Tumbler 340ml, Impressions: I bought this as a souvenir at the AutoExe booth when I went to the Mazda Fan Festa.

2025-10-10MAZDA2 / DemioImpression User

Increased body rigidity

Installed Parts: Strut Tower Bar Impressions: I installed it to improve handling. After installation, the body rigidity increased and handling felt more secure. I think the effect can be felt even in the city. I'm very satisfied. Takedemi, Saitama Prefecture […]

2025-10-10RoadsterImpression User

Just the right amount of firmness

Installed Parts: Floor Cross Bars Impressions I installed the lowering springs, strut tower bar, and floor cross bars in that order. I could feel the effect of each, but the floor cross bars were the finishing touch. The body […]

2025-10-10CX-5Impression User

Recommended items that will give you a sporty look

Impressions of the Sports Side Visors I installed these parts when I got my new car. My wife had requested that I install the side visors, but after looking closely, I realized that the price difference compared to the OEM parts was only about 1,500 yen, so I decided to buy them from Au […]

2025-10-10MAZDA3 / AxelaImpression User

The engine room was visible

Installed Parts: Strut Tower Bar Impressions: When I received the car, I was planning to drive it as normal, but I felt something was off about the rigidity of the front, so I installed the strut tower bar. After installing it, the steering became heavier, so I think it's effective. Kenzaburo, Fukushima Prefecture […]

2025-10-10RoadsterImpression User

Battery clamp

Installed Parts: Battery Clamps My impression: I chose these to dress up my car (and for my own satisfaction) since the engine bay accents are all red. They're well-made. BRP, Saitama Prefecture, Model: Roadster, Model […]

2025-10-10RoadsterImpression User

The red tower bar is motivating!

Installed Parts: Strut Tower Bars: My Impressions: I purchased and had the dealer install them when I bought my new car. Since it was an RS grade, the factory tower bars were installed, but they didn't allow for height-adjustable damping, so I replaced them. Compared to the factory stiffness, […]

2025-08-27CX-60Impression User

Also effective against type 2

Installed Parts: Motion Control Beam Impressions: I was so pleased with the results on my previous Model 1, I installed it on my Model 2 as well. The installation process was significantly shorter the second time around. The only downside to the front was the undercover removal, which was a bit of a pain. The rear […]

PAGE TOP