MAZDA6/Atenza

2025-03-24MAZDA6/AtenzaKotaro NISHIOKA

This time's mini tuning.

●Installed parts: Street brake rotors This street brake rotor replacement was a long-cherished wish since I replaced only the pads before. Currently, the rotors are hard to see because the genuine winter wheels are installed, but after the snow melts, the rotors will be visible when the summer tires and wheels are installed. […]

2024-11-21MAZDA6/AtenzaIto Takeru

It's good that the red stands out.

●Installed parts: Strut tower bar I had installed height adjustment on my previous car, the CX-5, and decided to purchase this when I also installed height adjustment on my current Mazda6. I also thought it would be nice to have the red stand out when you open the hood. […]

2024-11-21MAZDA6/AtenzaIto Takeru

The entire car feels more rigid.

●Installed parts: Strut tower bar I installed a strut tower bar and a floor cross bar. They were installed at the same time, considering the front and rear. The strut tower bar was installed in a few minutes. The floor cross bar had a small installation space and was too close to the back of the seat.

2024-11-21MAZDA6/AtenzaIto Takeru

A little accent.

●Installed parts: Oil filler cap, oil level gauge grip, aero sports wiper blade I can’t afford to buy expensive parts, so I bought less expensive ones little by little. The oil filler cap and oil level gauge grip […]

2024-11-18MAZDA6/AtenzaIto Takeru

My favorite accessory.

●Installed parts: Battery clamp This red battery clamp, which imitates a strut tower bar, adds a touch of glamour to the engine bay. Every time you open the hood, you will see the red clamp, which matches the strut tower bar, and you will feel like you are […]

2024-11-15MAZDA6/AtenzaIto Takeru

The car feels more stable in corners and at high speeds.

●Installed parts: Motion control beam We installed a motion control beam on the Mazda6 wagon to give it a more high-quality and luxurious feel. It has been more than two years since we installed it, and it has a smooth ride during normal city driving. […]

2024-11-14MAZDA6/AtenzaIto Takeru

I feel a sense of satisfaction every time I open it.

●Installed parts: Bonnet damper I felt the weight every time I opened the bonnet to wipe it off after washing the car, so I decided to buy it. It was easy to install and I feel a sense of satisfaction every time I open the bonnet. ●Kesuke, Gunma Prefecture (Atenza/GJ)

2024-11-08MAZDA6/AtenzaIto Takeru

Dressing up the wiper area.

●Installed parts: Aero Sports Wiper Blades It was time to replace the genuine wipers, so I installed them to dress up the plain wiper area. They are easy to install and have the same effect as the genuine ones, but I don't think they've made things worse. […]

2024-11-07MAZDA6/AtenzaIto Takeru

The red guide peeking out from the grill is also nice.

●Installed parts: Fresh air guide The intake temperature drops by introducing fresh air. The red guide peeking out from the grill is also good. ●S.Bullet, Shizuoka Prefecture (Atenza/GJ)

2024-11-07MAZDA6/AtenzaIto Takeru

It feels heavy when you hold it in your hand.

●Installed parts: Brake fluid cap Simply replace the genuine cap with a rubber diaphragm and attach it to improve the appearance. Since it is machined from aluminum, the solid feel when you hold it in your hand will satisfy your desire to own it. ●Tokyo […]

2024-10-29MAZDA6/AtenzaIto Takeru

The car's class has gone up a notch.

●Installed parts: Motion control beam In order to reduce the resonance before the bulkhead, which was a concern with the early Soul of the Move generation, a motion control beam has been introduced. The rigidity of the body itself is sufficient as is, but the distance from the bulkhead to the strut tower […]

2024-10-29MAZDA6/AtenzaIto Takeru

It fits comfortably in your hand.

●Installed parts: Sports steering wheel The red stitching is cool. The diameter of the grip part of the steering wheel is not much different from the genuine one, but it is made of perforated leather, so it fits comfortably in your hand. Also, it has a flat bottom.

2024-10-25MAZDA6/AtenzaIto Takeru

It turns corners with ease.

●Installed parts: Strut tower bar When I tried driving with this tower bar installed, I felt that the roll was reduced and it was easier to turn corners. The red color is also cool. ●Masa-san, Yamaguchi Prefecture (Atenza/GG)

2024-10-25MAZDA6/AtenzaIto Takeru

It turned out great.

●Installed parts: Sports stabilizer After I got the car, I noticed that it didn't bend as much when I drove it in a sporty manner. A previous customer told me that if I just replaced the rear stabilizer, it would change things! So I ordered it and installed it at the dealer. […]

2024-10-25MAZDA6/AtenzaIto Takeru

It makes me feel good.

●Installed parts: Carbon paddle shift lever I find it very useful because I can shift gears no matter where I operate the long lever. The genuine paddle feels like it goes in and out, but this paddle feels like it goes in and out. It's like hitting a heavy piece of metal. […]

2024-10-18MAZDA6/AtenzaIto Takeru

High speed cornering is very stable.

●Installed parts: Strut tower bar High-speed cornering has become much more stable. I think the engine bay looks cooler now. I also like the color! ●Amia, Osaka (Atenza/GJ)

2024-10-16MAZDA6/AtenzaIto Takeru

It looks and feels better.

●Installed parts: Lowered springs The wheelhouse and the soft ride feel when turning that were a concern with the stock vehicle height have been reduced, and the appearance and ride feel have improved! I'm sorry that it's hard to compare because the angle of view is different, but the first photo is after the lowered springs were installed.

2024-10-16MAZDA6/AtenzaIto Takeru

People around me praised it as "cool".

●Installed parts: Front bumper & grill, rear spoiler, side extension set, etc. I was fascinated by the pictures on the Autoexe website, so I got as close to it as my budget would allow. And the biggest thing is this big grill! Thanks to that, people around me said, "That's cool! […]

2024-06-18MAZDA6/AtenzaIto Takeru

Perfect for subtle fashion.

●Installed parts: Wheel nut set I had been using black steel nuts for over 20 years, and I was thinking it was time to get new ones. Then I found a special gunmetal color wheel nut set and bought it. It looks nice and small […]

2024-06-07MAZDA6/AtenzaIto Takeru

The roll has decreased and the rear has become more firm.

●Installed parts: Adjustable stabilizer link, sports stabilizer I didn't want to lower the vehicle height, so I chose a sports stabilizer. Roll has decreased and the rear now has more foothold. The ride comfort remains almost unchanged. Manho […]

2024-05-29MAZDA6/AtenzaTunenori TAKECHI

Adds a sense of luxury.

●Installed parts: Chrome emblem Attached to the rear. The sense of luxury has been improved. ●Yamaguchi Prefecture Mr. Kaiba (Atenza/GG)

PAGE TOP

Impression

This time's mini tuning.

It's good that the red stands out.

The entire car feels more rigid.

A little accent.

My favorite accessory.

The car feels more stable in corners and at high speeds.

I feel a sense of satisfaction every time I open it.

Dressing up the wiper area.

The red guide peeking out from the grill is also nice.

It feels heavy when you hold it in your hand.

The car's class has gone up a notch.

It fits comfortably in your hand.

It turns corners with ease.

It turned out great.

It makes me feel good.

High speed cornering is very stable.

It looks and feels better.

People around me praised it as "cool".

Perfect for subtle fashion.

The roll has decreased and the rear has become more firm.

Adds a sense of luxury.