Body

2026-08-25CX-5Impression User

The long-awaited engine room

Installed parts: Ram air intake system, fresh air guide, intake suction kit, battery clamp, strut tower bar, oil filler cap, brake fluid cap, oil level gauge grip, Impression […]

2026-07-31CX-60Impression User

The rigidity of the door opening changes the driving experience.

Installed Parts: Door Stabilizer Impression: Installing the door stabilizer clearly improved steering linearity and reduced the need for corrective steering, elevating the driving quality of the CX-60 to a higher level. This isn't simply an increase in rigidity, but rather […]

2026-07-31RoadsterImpression User

Motion control beam (MCB)

Installed Parts: Motion Control Beam Impression: I rarely do sporty driving, but perhaps because I installed adjustable suspension, I was a little bothered by the jarring on uneven roads. I tried installing this hoping it would improve the ride comfort, and the results were... […]

2026-06-16MAZDA2 / DemioImpression User

Next to the previous one is the back.

Installed Parts: Floor Crossbar Impression After the strut bar, the next step was the floor crossbar. Since the front rigidity had increased, I decided to install it to improve the rear rigidity as well. After installing it, I noticed a significant improvement in the rear's responsiveness in corners...

2026-06-09MAZDA2 / DemioImpression User

AutoExe can be secured with three nuts.

Installed Parts: Strut Tower Bar - Impression This time, it's the strut tower bar. I was skeptical, wondering what difference a simple iron bar could make, as I looked at various customizations. Actually, I'd also looked at tower bars from other companies... […]

2026-06-09CX-3Impression User

Body reinforcement transforms it into a different car

Installed parts: Strut tower bar, lower arm bar, center floor bar, floor cross bar. Impression: For the past year, I've been driving about 2000km per month, mainly on highways, and I was dissatisfied with the rigidity during cornering at high speeds, so I decided to do this when my second vehicle inspection came around. […]

2026-06-05MAZDA6/AtenzaImpression User

Floor crossbar

Installed parts: Floor crossbar. Impression: The rear end feels more stable when cornering. S.Bullet, Shizuoka Prefecture. Vehicle: Atenza, Model: DBA-GJ5FP, Grade: 25SL

2026-06-05MX-30Impression User

Another car

Installed parts: Lowering springs, strut tower bar, adjustable stabilizer links, sports stabilizer, member brace set, floor crossbar. Rear Impression: The tower bar and lowering springs were delivered […]

2026-06-02CX-30Impression User

I feel like I have my feet firmly on the ground.

Installed Parts: Strut Tower Bar - Impression I've driven 3 km since buying the car new. And finally, I installed a strut tower bar! I didn't install it when I bought the car new because I wanted to really feel the difference in handling. Thanks to that, the difference is clear... […]

2026-06-02RX-8Impression User

Tuning is all about overall balance 🎵

Installed parts: strut tower bar, floor crossbar, intake suction pipe, master cylinder brace, sport spark plug wires, sport clutch line, oil filler cap, brake fluid cap, wheel nuts, bonnet […]

2026-05-29MAZDA3 / AxelaImpression User

An exhilarating intake sound

Installed parts: Ram air intake system, floor crossbar. Impression: Compared to the stock setup, the intake sound and power output from around 3000 rpm are noticeably stronger. The body reinforcement, especially at the rear, fits well and is very effective. […]

2026-05-29RoadsterImpression User

剛性アップ

Installed Parts: Tower Brace Set Impression: I installed the tower brace set. As intended, it increased rigidity, making driving on winding roads more enjoyable. I also have the motion control beam installed, so there might be a synergistic effect...

2026-05-26MAZDA2 / DemioImpression User

The first step in body reinforcement

Installed parts: Strut tower bar DJA1V5420, Front grille MDJ2510. Impression: I've also installed strut tower bars on my previous cars (MS6, MPV), and I consider them a fundamental part of light tuning for increasing suspension rigidity. […]

2026-05-26RX-8Kotaro NISHIOKA

AutoExe carbon fiber intake box installed.

Installed parts: Ram Air Intake System, Strut Tower Bar, Oil Filler Cap, Brake Fluid Cap. Impression: Installed AutoExe carbon fiber […]

2026-05-26MAZDA3 / AxelaImpression User

Lower arm bar

Installed Parts: Lower Arm Bar - Impression The Mazda3 already has a relatively low ride height and a firm suspension in its stock form. So I was satisfied with the ride quality, but... I wanted to slightly improve the appearance and driving performance, so I installed a strut bar and lower arm bar... […]

2026-05-22RX-8Kotaro NISHIOKA

Uncompromising Comfort

Regarding the installed part, the Motion Control Beam: To give you the results upfront, it wasn't a placebo effect; it was a genuinely noticeable improvement. My RX-8 has already exceeded 170,000 km, and I intend to continue driving it carefully...

2026-05-19CX-30Kotaro NISHIOKA

autoexe bodywork vehicle

Installed parts: Lowering springs, strut tower bar, ram air intake system, intake suction kit, premium tail muffler, oil filler cap, oil level gauge grip, brake fluid cap, etc. […]

2026-05-15RX-8Impression User

Engine bay upgrade

Installed Parts: Hood Damper Impression I've been a member since 2024. Following my previous CX-30, I finally got my hands on a rotary-engined RX-8, so I've installed hood dampers on this one as well. Both originally had a steel rod on one side...

2026-05-15CX-30Impression User

AutoExe Bart

Installed parts: Hood damper, strut tower bar, floor crossbar, lower arm bar, sports damper. Impression: I started making small modifications to the car little by little when it was new (2020), installing a strut tower bar, hood damper, floor crossbar, etc. […]

2026-05-15RoadsterImpression User

Only the floor crossbars are installed?!

Installed parts: Strut tower bar, floor crossbar, intake suction kit, helical short antenna. Impression: Due to a mistake, some parts for the strut tower bar were missing, so only the floor crossbar was installed. [...]

2026-05-15MAZDA2 / DemioImpression User

It feels more solid.

Installed Parts: Floor Crossbar Impression: It seems to function as a rear version of the front strut tower bar. The body feels stiffer when turning corners and curves. It's not that the ride comfort has become harsher. When turning the steering wheel... […]