New release for CX-60.

The left and right sides of the upper part of the floor are connected to create a tower bar effect.

A strut tower bar that connects the upper mounting part of the suspension to prevent the body from opening.The effect is remarkable, but there is no strut tower in the rear suspension in cars that consider utilities such as hatchbacks and minivans ... Therefore, we focused on the floor itself. The "floor crossbar" is a part that connects the left and right sides of the rear floor (upper surface of the luggage space) with high-rigidity steel pipes to reinforce it.The rear strut tower bar has a thinned effect with little sacrifice in luggage room utility.The effect is especially great for hatchbacks and minivans with an open structure that does not have a partition plate between the rear seats and the luggage space.Since it is mounted on a high-strength seat mounting point, there is no concern about the burden on the body.From the viewpoint of balance, it is recommended to install it at the same time as the front strut tower bar.

---

Force relation that input from the road surface is transmitted to the body (conceptual diagram)

---

<Product compatibility table>

■ Floor Cross Bar　Steel rear

Car name	適合 車 種	part number	Tax-included price (Price without tax)	Spec. (Interior notch processing required)	Codes	Reference work Time
RX-8	SE3P	MSE450	26,400JPY (¥ 24,000)	2-piece structure 2-point system	D	0.8 h
Roadster	All ND series cars NCEC	MND4500A MNC450	26,400JPY (¥ 24,000)	2-piece structure 4-point system 2-piece structure 2-point system	D	1.0 h
MAZDA2 / Demio	DJ 2WD car DJ 4WD car	MDJ4500 MDK4500A	19,800JPY (¥ 18,000)	2-piece structure 3-point system	D	0.8 h
MAZDA3	All BP series cars	MBP4500	19,800JPY (¥ 18,000)	1-piece structure 3-point system	D	0.8 h
Axela	All BM series cars BYEFP BL / BK series 2WD car	MGJ450A Mby4500 MBL450	19,800JPY (¥ 18,000) 17,600JPY (¥ 16,000) 15,400JPY (¥ 14,000)	1-piece structure 3-point system 1-piece structure 3-point system 1-piece structure 2-point system	D	0.5 h
MAZDA6 / Atenza	All GJ series cars	MGJ450A	19,800JPY (¥ 18,000)	1-piece structure 3-point system	D	0.5 h
CX-3	All DK series cars	MDK4500A	19,800JPY (¥ 18,000)	2-piece structure 3-point system	D	0.8 h
CX-30	All DM series cars	MDM4500	19,800JPY (¥ 18,000)	1-piece structure 3-point system	D	0.8 h
MX-30	DREJ3P	MDM4500	19,800JPY (¥ 18,000)	1-piece structure 3-point system	D	0.8 h
CX-5	All KF series cars	MKF4500	24,200JPY (¥ 22,000)	1-piece structure 3-point system	D	0.8 h
CX-60	KH series (excluding KH5S3P)	KHA1 V5 450	¥35,200 (¥ 32,000)	3-piece structure 2-point system	D	0.8 h
CX-8	All KG series cars	MKG4500	19,800JPY (¥ 18,000)	1-piece structure 3-point system	D	1.0 h
Flare / AZ-Wagon	MJ34S / MJ44S 2WD car / MJ23S	MMJ450	sold out.	1-piece structure 2-point system	D	0.5 h

please note・ ・ ・ Since the mounting points overlap, it cannot be mounted at the same time as the tower brace set.