Impression

MAZDA6/Atenza

2018-10-24MAZDA6/AtenzaTunenori TAKECHI

You can lightly open the heavy bonnet!

● Mounting parts: Bonnet damper You can lightly open a heavy bonnet!Cleaning the engine room does not get in the way and wipes it comfortably.It's been XNUMX years since it was installed, and it works without any settling of the damper! ● King, Fukuoka ([…]

2018-10-17MAZDA6/AtenzaTunenori TAKECHI

Isn't this genuine?I think

-Mounted parts: Sports stabilizer Atenza is originally made to be comfort-oriented, the diameter of the stabilizer is smaller than Axela, and I feel a little unsatisfactory compared to the size of the car body.This sports stabilizer […] depends on the set of the suspension

2018-08-20MAZDA6/AtenzaTunenori TAKECHI

The feeling of sluggishness during acceleration has been improved, and smooth acceleration can now be obtained.

● Installation parts: Intake suction kit I felt a little sluggish when starting or re-accelerating from deceleration, so I had the dealer install it during the one-month inspection after delivery.The volume is so low that you can see that the sound has changed slightly when you open the accelerator. […]

2018-05-25MAZDA6/AtenzaTunenori TAKECHI

It has realized a crisp run full of rigidity.

-Mounted parts: Tower brace set The tower bar set in the tower brace set is different from the one sold separately from EXE, and in the single tower bar, it is set in the tower brace set as opposed to the 3-point stop on one side. The tower bar is […]

2018-05-22MAZDA6/AtenzaTunenori TAKECHI

It's been 9 years since I put it on, and it runs lightly without any settling.

-Installed parts: Lowdown spring 2009 I bought GH Atenza with a new car and replaced the genuine spring with AutoExe's lowdown spring.It's been 9 years since I put it on, and it runs lightly without any settling.The ride is also comfortable.The pass is […]

2018-05-18MAZDA6/AtenzaTunenori TAKECHI

I like it very much because it makes a good start.

Parts to be installed: Air filter replacement, intake suction kit, wheel nut set, oil filler cap, exhaust finisher, Optima battery When inspecting, I had the parts replaced little by little.Running […]

2018-05-18MAZDA6/AtenzaTunenori TAKECHI

The fun of bending has doubled.

● Installation parts: Strut tower bar, center floor bar, sports stabilizer, floor cross bar, exhaust chamber kit, and other reinforcement parts have reduced roll and stable running.The rear feels a delay in turning from the center […]

2018-05-18MAZDA6/AtenzaTunenori TAKECHI

Easily and effectively improve accelerator response.

● Installation parts: Air filter replacement I was able to install it myself by taking advantage of the air filter box of mass-produced cars and replacing only the filter part.The filter material is a dry non-woven fabric that has little effect on the airflow sensor, and […]

2018-05-18MAZDA6/AtenzaTunenori TAKECHI

I am satisfied because it emphasizes coolness.

-Mounted parts: Low-down spring, adjustable stabilizer link Low-down to make it cool.I think it's not overkill, but I think the rear wheels can be a little higher.Installed at the same time as purchasing the vehicle […]

2018-05-15MAZDA6/AtenzaTunenori TAKECHI

I think that the attached appearance is a very satisfying product.

-Mounting parts: Rear roof spoiler Although it comes from various manufacturers, I like AutoExe.I think it's huge and stands out.It's just expensive, compared to other manufacturers.However, I think that the attached appearance is a very satisfying item […]

2018-05-11MAZDA6/AtenzaTunenori TAKECHI

You can see that the entire floor is united even when running.

-Installed parts: Tower brace set, member brace set, street sports brake pad, ram air intake system, sports muffler, low down spring, etc. My 14 model Atenza has a mileage of 2 […]

2018-05-11MAZDA6/AtenzaTunenori TAKECHI

It's much more fun to drive than before.

● Mounting parts: Strut tower bar, intake suction kit, bonnet damper, sports wiper blade, oil filler cap, wheel nut set In April 28, at the same time as the second son decided to purchase the CX-4, Atenza […]

2018-05-08MAZDA6/AtenzaTunenori TAKECHI

It was well received as "it looks like a European car", and I also liked it.

-Mounted parts: GJ-05S Front bumper & grill It has a deeply carved face (laughs).My acquaintance said, "It looks like a European car," and I got a look that I liked.I had you paint and install it at an acquaintance's repair shop […]

2017-07-15MAZDA6/Atenzaohtomi

After mounting, the roll has decreased considerably.

-Mounted parts: Lower arm bar / floor crossbar It is an impression with the tower bar of other companies, the lower arm bar front / rear of AutoExe, and the floor cross bar.I was always worried about the roll and was satisfied with the low down spring at first […]

2017-06-15MAZDA6/Atenzaohtomi

Suddenly to the D range

● Mounting parts: Shift knob Spherical shape The shift knob can be easily removed and installed according to the instructions, and it will take about XNUMX minutes.It has a good grip, and it feels good to push it in and move it to the D range.The last screwing is […]

2017-05-15MAZDA6/Atenzaohtomi

The number of rolls has decreased considerably, making it easier to drive.

-Mounted parts: Adjustable stabilizer link This is the second product of Auto Exe.Last time I installed a low down spring, but the stabilizer link was still genuine.It feels uncomfortable as it is, so I rushed to Aja […]

2017-04-01MAZDA6/Atenzaohtomi

Click here for past impressions.

Please click the link below. (From ①, the order is newer) ・ User impression ① ・ User impression ②