Diesel hybrid vehicles/PHEV vehicles (excluding L-PACKAGE)

Diesel vehicles/PHEV L-PACKAGE vehicles

Front under spoiler

The dynamic form, incorporating a high nose and forward-swept wing tips, gives the car a powerful and elegant look. Painted in piano black. *The image is for diesel hybrid vehicles/PHEV vehicles (excluding the L PACKAGE).

Front grill

A fin type with a horizontal tone that emphasizes the depth of carving.Piano black is applied to the surface, matte black paint is applied to the concave part, and the Mazda emblem is traded in.

Side under spoiler

The side view is tightened, resulting in a more complete styling. Painted in piano black. Equipped with AutoExe ornaments on both sides.

Rear side cowl

The design is based on the ducts on the left and right sides of the premium grade front bumper. It gives a sporty and unified accent to the rear view. (Available in Rhodium White M, Machine Gray Premium M, and Artisan Red Premium M painted versions.)

Rear under garnish

A special diffuser design attached to the rear bumper. Together with the real roof spoiler, it tightens up the rear view. Painted in piano black.

Rear roof spoiler

Glossy piano black specifications.The wing-type design full of sports mind gives the rear view a powerful impression.

Sports side visor

Equipped with a ventilation mechanism that exhausts indoor air using running wind.Don't miss the aero form that tightens the side view sporty.

Door handle cover & protector set

Matte carbon-look finish that protects the paintwork of the door handle and gives the styling a sporty look. Includes AutoExe logo. Double-sided tape attached.

Sports muffler/muffler garnish

A form full of unity with a muffler with 4 left and right and a special garnish.Comfortable sports sound and light accelerator response are attractive.

■ Lowdown spring *Scheduled for release this winter or later
A low-down spring that tightens the styling to a sporty look and improves handling by lowering the center of gravity. It is not too low or too strong, and by keeping the increase in spring constant to a minimum, it ensures sufficient suspension stroke even when combined with mass-produced dampers, creating a ride quality with reduced jolts.

■Adjustable stabilizer link (front)
When the vehicle height is lowered, the angle of the lower arm changes. As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect. This product shortens the link length and corrects the arm angle when the vehicle height is lowered. Optimize the stabilizer function.>> More details

<Main specifications> - Full length non-adjustable (fixed type) - Set of 2

■ Sports stabilizer
The left and right suspension arms are connected with a pipe, and the spring effect of the stabilizer suppresses roll. The spring constant has been strengthened by 121% since mass production. It stabilizes the posture when cornering while maintaining controllability. Since there is almost no spring effect when driving straight, the impact on ride comfort is also minimal.>> More details

<Main specifications> Hollow φ35.0 Dedicated rubber mount/bracket included Spring constant 121%

■ Strut tower bar
For the CX-80, which has limited space and structure, the main bar is mounted on the front frame, and the suspension tower is connected three-dimensionally with a gusset plate.Although it is a split structure, it directly suppresses the stress that escapes from the joint and the distortion of the suspension tower, ensuring rigidity comparable to the welded integrated type.It is best to use it in combination with a floor crossbar.>> More details

<Main specifications> -Steel 5-piece structure 4-point type

■ Lower arm bar (front)
The center of the front lower arm rear pivot, where stress is concentrated during driving, is connected with a steel oval pipe to suppress deformation.Supports accurate handling by regulating unnecessary alignment changes.Mass-produced undercovers can be used together without processing.>> More details

<Main specifications> -Steel 1-piece structure 2-point type

■ Lower arm bar (rear)
The lower arm attachment part of the mass-produced rear cross member has a closed structure, making it difficult to distort.This product has a structure that suppresses deformation of the cross member itself by connecting the pivot part of the toe control link, which has an open structure in mass production, to the left and right.>> More details

<Main specifications> -Steel 1-piece structure 2-point type

■Air filter replacement
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details

<Main specifications> ・ Dry type ・ Disposable type

■Intake suction kit
Specifications that secure the maximum effective flow path area of ​​intake air and reduce intake resistance.The material used is multi-layer polystar silicon, which has a high effect of suppressing deformation due to negative suction pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details　

<Main specifications> ・ Made of 4-layer polystar silicon

■ Sports muffler(for diesel hybrid/diesel vehicles)
Rear exhaust left and right 4 tail specifications to be installed at the same time as the exclusive muffler garnish.In terms of function, the highest priority is given to improving exhaust efficiency, and the multi-stage expansion type used in mass-produced vehicles has been changed to a straight structure to reduce back pressure loss.Examine the pipe layout and silencer capacity, etc., and get an agile response.By silencing without using glass wool, we have created a sports sound that is clear and well-defined even in the upper register.>> More details　

<Main specifications> ・Pipe diameter φ60.5 ・Tail diameter 80mm (×4)
* Must be installed at the same time as the muffler garnish.

■ Brake pedal brace
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details

<Main specifications> -Steel 2-piece structure

■Sports oil filter
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details

<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production

■ Fuel cap cover
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles.　>> More details

<Main specifications> ・ ABS red painted ・ With decorative cap bolt ・ With AutoExe logo ・ Double-sided tape attached ・ Fuel label / erroneous oil supply prevention reminder sticker included

■Sports side visor
A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.>> More details

<Main specifications> -Smoke type acrylic resin-Set of 4 left and right with AutoExe logo

■ Door handle cover & protector set
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details

<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 4 ・ PVC protector x 4 ・ One set

■Door handle protector
Made of carbon-like PVC that protects the paint around the door handle, which is easily damaged when opening and closing. The lineup includes three colors: black, silver, and red (a color similar to Soul Red Crystal Metallic) that can be selected according to the body color.>>Click here for part numbers and prices

<Main specifications> - Carbon-like AutoExe logo included - PVC double-sided tape adhesive - Left and right set - Front/rear common use (1 sets required for 2 car)

■ Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details

<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included

■Air valve cap
Following the design of AutoExe wheel nuts, this product is made of aluminum with a red anodized finish, allowing you to enjoy a total coordination. The brass threads that are exposed on mass-produced plastic caps are covered to give a clean and sophisticated impression around the wheel.>> More details

<Main specifications> Aluminum, red anodized + clear coating with AutoExe logo (on both sides), set of 4

■ Sports steering wheel

A red-colored center mark with a flat bottom shape ... An airbag-compatible product that uses high-quality nappa leather as the material for outstanding sportiness.The elliptical cross-section grip with dimple processing that is not too thick and easy to grip, and the dimple-processed leather and thumb grip that improve holdability are created with details to actively enjoy driving.>> More details

<Main specifications> -Made of nappa leather-SRS airbag system / steering switch compatible-Flat bottom shape

■ Carbon paddle shift lever
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving.　>> More details

<Main specifications> ・Carbon fiber ・4-piece construction ・AutoExe logo included

■Shift knob (spherical/aluminum)
The size is 52mm in diameter. A spherical aluminum anodized finish that gives the cockpit a mechanical impression. When operating, push the top of the shift knob and shift the knob. It has a smart operation feel that eliminates the lock release button of mass-produced products.>> More details

<Main specifications> - Aluminum alumite finish - AutoExe logo included