
Firmly support both knees for accurate pedal work.
ND & SE, a full-fledged knee pad set specially designed for each car model.
In sports driving while feeling the G force of cornering and acceleration/deceleration, it is essential for the driver to maintain a stable posture in order to perform reliable operations.The ideal is equipment such as a full bucket seat that holds the upper body firmly, but it imposes restrictions on daily usability.We, who advocate the best street tuning, propose a full-fledged knee pad set with special fitting for each model.It firmly supports both knees of the lower body, which is the foundation of the body, and suppresses changes in posture for drivers who want to actively enjoy driving.It supports accurate pedal work while maintaining the comfort of mass-produced seats.The skin has a flocky coating that feels good on the skin and has a 3-step height adjustment function.Depending on your preference, you can also purchase the left and right separately.

[Hold both knees with left and right set]
Both knees are firmly supported by the left and right set of the driver's door side and the console side designed exclusively for each vehicle type.Double-sided tape installed (requires hole drilling on trim for RX-8 door side).

[Adjust the height according to your body shape and preference]
The driver's door side can be adjusted in 3 steps of 10mm (every 5mm) by inserting the included spacer*.In addition, it was designed so as not to impair the speaker function.
*The image shows the state when two spacers are used (adjustment after installation is not possible).
<Product compatibility table>
■ Knee Pad Set
Car name | 適合 車 種 ※ 1 | part number | Tax-included price (Price without tax) | Components (single item) Driver side | Components (single item) console side | Spec. | Codes | Reference work Time |
---|---|---|---|---|---|---|---|---|
RX-8 | SE3P ※ 2 | SEA1 V1 51X | ¥ 82,500 (¥ 75,000) | SEA1 V1 510 | SEA2 V1 510 | FRP flocky coating (flocked coating) finish Left and right set 3 height adjustable With AutoExe logo plate | F | 1.3h |
Roadster | All ND series cars ※ 3 | NDA1 V1 51X | ¥ 82,500 (¥ 75,000) | NDA1 V1 510 | NDA2 V1 510 | FRP flocky coating (flocked coating) finish Left and right set 3 height adjustable With AutoExe logo plate | F | 1.0h |
※ 1 When installing a commercially available bucket seat with high support, the product may not function (the knee part may not hit), or the seat may interfere with the product when sliding.
※ 2 Compatible with vehicles equipped with genuine seats and genuine RECARO seats.Depending on the installation, the amount of forward and backward sliding of the seat is regulated.Drilling required for mounting on the door side.
※ 3 Compatible with genuine seat, genuine RECARO seat, AutoExe full bucket seat TYPE-A7 equipped vehicle.
Also available separately for the driver door and console sides if desired.
driver's door side
<Product compatibility table>
Car name | 適合 車 種※ 1 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
---|---|---|---|---|---|---|
RX-8 | SE3P※ 2 | SEA1 V1 510 | ¥ 55,000 (¥ 50,000) | FRP flocky coating (flocking coating) finish XNUMX-step height adjustment AutoExe logo plate included | F | 0.8h |
Roadster | All ND series cars※ 3 | NDA1 V1 510 | ¥ 57,200 (¥ 52,000) | FRP flocky coating (flocking coating) finish XNUMX-step height adjustment AutoExe logo plate included | F | 0.6h |
※ 1 When installing a commercially available bucket seat with high support, the product may not function (the knee part may not hit), or the seat may interfere with the product when sliding.
※ 2 Compatible with vehicles equipped with genuine seats and genuine RECARO seats.Depending on the installation, the amount of forward and backward sliding of the seat is regulated.Drilling required for mounting.
※ 3 Compatible with genuine seat, genuine RECARO seat, AutoExe full bucket seat TYPE-A7 equipped vehicle.
console side
<Product compatibility table>
Type of vehicle | Suitable※ 1 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
---|---|---|---|---|---|---|
RX-8 | SE3P※ 2 | SEA2 V1 510 | ¥ 27,500 (¥ 25,000) | FRP flocky coating (flocked coating) finish With AutoExe logo plate | F | 0.5h |
Roadster | All ND series cars※ 3 | NDA2 V1 510 | ¥ 27,500 (¥ 25,000) | FRP flocky coating (flocked coating) finish With AutoExe logo plate | F | 0.4h |
※ 1 When installing a commercially available bucket seat with high support, the product may not function (the knee part may not hit), or the seat may interfere with the product when sliding.
※ 2 Compatible with vehicles equipped with genuine seats and genuine RECARO seats.Depending on the installation, the amount of forward and backward sliding of the seat is regulated.
※ 3 Compatible with genuine seat, genuine RECARO seat, AutoExe full bucket seat TYPE-A7 equipped vehicle.