Newly released in light grey.
Improved hold performance for sports driving.
Roadster (ND) dedicated fitting.
The high-roll stiffness suspension allows the driver to clear a series of zigzag corners, and the dedicated full bucket type seat holds the driver firmly even in situations where strong lateral G forces occur. The basic shell is made of high-rigidity FRP. The side supports are asymmetrical to fit perfectly into the tight interior of the ND. The surface is made of flame-retardant material with bold black and red or light gray stripes. It is equipped with functions ideal for sports driving, such as belt holes for 35-3 point seat belts, a height that allows the hip position to be lowered by up to XNUMX mm, and a back angle adjustment mechanism. In addition, removable seat/back cushions, lumbar support, and a guide for a XNUMX-point seat belt are standard equipment. Convenience on the street has also been taken into consideration, such as the optional kit for relocating the original speaker. We hope that you will deepen your direct interface with the car by coordinating it with the steering wheel/shift knob of the same design.
Red wearing state
Light grey installed
<Product overview>
■ Back / Seat / Lumber Support Cushion
Detachable XNUMX-point configuration including lumbar support.When driving on a circuit, it can be removed and seated deeply to ensure holdability.You can choose to wear it on the street to mitigate the impact.
■ Belt hole / belt guide
Equipped with a hole for 4- to 5-point seat belts on the back x 2 / seat x 1.A belt guide is provided to assist the smooth wearing of genuine seat belts.
■ AutoExe logo / center stripe
High-quality flame-retardant PVC Hi-Largo fabric is used (cushion section is punched). The center line and stitching are consistent with the steering wheel and shift knob for a sporty look.
■ Seat / back angle adjustment type
The height adjustment function of the front 3 steps / rear 4 steps provided on the side bracket enables fine setting.Achieves a low position of up to 35 mm.
■ Speaker relocation kit
An optional kit is available to relocate and install the speaker built into the genuine seat. Supports Bluetooth hands-free calling (speaker / harness not included in the kit).
■ Dimensional drawing
<Product compatibility table>
■ Full Bucket Seat For Roadster (ND5RC/ND5RE)/Roadster RF (NDERC/NDERE)
| Product name | Part | stripe/ Stitch color | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | reference Working hours |
|---|---|---|---|---|---|---|---|---|
| Full bucket seat TYPE-A7 | Driver's seat (RH) | Red ラ イ ト グ レ ー | All cars ※ 1 | MND1970-03 MND1970-11 | \176,000 (¥ 160,000) | FRP, black flame-retardant PVC skin Seat cushion included Made of escalate with AutoExe logo | F | - |
| Full bucket seat TYPE-A7 | Passenger seat (LH) | Red ラ イ ト グ レ ー | All cars ※ 1 | MND1980-03 MND1980-11 | \187,000 (¥ 170,000) | FRP, black flame-retardant PVC skin Seat cushion/with seating sensor ※ 2 Made of escalate with AutoExe logo | F | - |
| Dedicated seat rail | Driver's seat (RH) Passenger seat (LH) | - | All cars All cars | MND1975 MND1985 | \55,000 (¥ 50,000) \55,000 (¥ 50,000) | Height/angle adjustable side brackets included Seat surface is 35mm lower than mass-produced model For full bucket seat TYPE A7 installation | F | 1.0h |
| Dedicated speaker Relocation kit | - | Car with genuine headrest speaker ※ 3 | MND1990 | \17,600 (¥ 16,000) | Relocated pillow speaker with built-in genuine seat For full bucket seat TYPE A7 installation | F | 0.8h |
※ 1 Dedicated seat rails (MND1975 / MND1985) are required for installation.Also, the side airbag / seat heater is not equipped and does not work (the product comes with a side airbag canceller).
[Caution] Combinations other than the dedicated seat rail do not meet the safety standards.
※ 2 The seat sensor may not detect the occupant depending on the occupant's body shape, weight, etc.
※ 3 9 speakers (BOSE) Car = driver / passenger seat 6 speakers = suitable for driver's seat.
