■ Street suspension kit
The concept is "more than mass production, less than tuning". The mass-produced suspension kit was born as part of an update program for discontinued sports cars, and is fine-tuned with a focus on the dampers, which are the key to handling. It combines nostalgia with modern "precision" and "flat ride" to create a new ride feel. >> More details

<Main specifications> Mass production shape Twin tube Damping force fixed type damper + Mass production shape spring
Assembly product with built-in genuine upper mount and bump stopper for NB
Spring constant Fr: 36.3N / mm (mass production ratio 133%) Rr: 23.3N / mm (mass production ratio 142%)
Vehicle height down amount: -15mm compared to mass production

■ Motion control beam
The front and rear body ends are reinforced to increase torsional rigidity, while ultra-high-damping friction dampers suppress body vibrations. The settings are neither too hard nor too soft, specifically for NA/NB, achieving both operability and ride comfort. Set of two, front and rear. Includes dedicated mounting brackets.>> More details

<Main specifications> -Friction type damper + steel shaft Front and rear set with mounting bracket

■ Ram air intake system
It consists of a large-capacity cleaner box with a specially designed intake path and a low-resistance K & N wet air filter that can be cleaned with the included maintenance kit.The shape of the carbon air box and the intake duct protruding from the top of the bonnet provide powerful acceleration from the moment you start stepping on the accelerator.The appearance made of real carbon is also high quality.>> More details

<Main specifications>・Special wet filter + carbon duct

■ Stainless muffler
Special specifications with a clean straight cut φ70 tail.A large-capacity straight structure silencer with low exhaust resistance and excellent response, a modest φ50.8 intermediate pipe, etc. create a well-balanced output characteristic and a gentle sports sound. Can be installed on all NA roadsters.>> More details

<Main specifications> ・ Pipe diameter: Φ50.8 ・ Tail diameter: Φ70 ・ Stainless steel

■ Exhaust manifold
The basic design is a 4-2-1 layout aimed at increasing torque from medium and low speeds. The assembly part of 4 or 2 pieces is made longer than mass production, and the angle of the confluence part is narrowed to prevent the blow-down phenomenon (exhaust backflow) that occurs at high rotation speed.In addition, a radial shape was adopted for the joint to the first part to increase the exhaust flow velocity.As a result, the torque (power) is improved from low to medium speed to peak.　>> More details

Main specifications> ・ Specifications: Made of SUS304 stainless steel ・ Pipe diameter: P = Φ42.6 T = Φ54.0 ・ Safety standard compliant product ・ Made by Maxim Works

■ Sports plug cord
Uses a stainless steel core wire with low electrical resistance and excellent noise resistance.By wrapping the core wire around the reinforced Kevlar and winding the three Kevlars in a spiral shape, the generation of the magnetic field that causes noise was prevented.Furthermore, the core wire is coated with a double silicone film.As a result, it achieves both low resistance of about 3Ω / m (ignition power is about 2 times that of mass production) and noise countermeasures that are a concern due to the low resistance.>> More details 

<Main specifications> -Uses low resistance triple structure core wire

■ Street sports brake pads
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details

<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃

■ Club sports brake pads
Sometimes to the circuit ...A sports pad that aims for "deceleration at will" that synchronizes with the driver's sensibility in high load areas such as continuous corners and full braking from straight.The material is a blend of carbon and a metal material with excellent fade resistance.It balances the conflicting frictional force and the suppression of rotor aggression at a high level.　>> More details

<Main specifications> ・ Graphite metal friction material ・ Rotor proper temperature: 50-800 ℃

■ Street brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance. >> More details

<Main specifications> ・ 6 slits on one side, 1 piece type

■ Sports clutch set
The facing material is a non-asbestos material that exhibits high mu in a wide temperature range.In combination with a doug tile cast iron cover with a crimping force increased by about XNUMX% compared to mass production, reliable torque transmission is possible.Although it requires some pedaling force for operation, it is a characteristic that is easy to handle in sports driving because the meet point at half-clutch is clear compared to mass production.>> More details

<Main specifications> ・ Genuine shape non-asbestos specifications ・ Crimping force: 5.2kN (1600) ・ 5.9kN (1800)

■ Sports clutch line
Uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and less expansion due to hydraulic pressure than the rubber used in mass-produced vehicles.Contributes to a direct clutch feel.In addition, PVC coating is applied to guard the hose for safety.It is a part that I would like to recommend even when installing a reinforced clutch that puts a burden on the clutch line. >> More details

<Main specifications> -Stainless steel mesh PTFE + PVC coating)

■ Limited slip differential
The mechanical (multi-plate clutch) limited slip differential, which distributes and transmits effective traction to the left and right drive wheels when cornering or on slippery roads, is based on the proven CUSCO product and is easy to use and comfortable. The original setting was applied.The operating method is 1.5 Way.Compared to mass-produced products, the direct operation feel is attractive.>> More details

<Main specifications> -Mechanical 1.5way cam angle 35 °-Torque bias ratio: 4.0-6.0-Specified LSD oil is included.)

■ Oil filler cap
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details

<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo

■ Aero sports wiper blade
An aero type wiper blade is used for the main body.By adding a deflector with fins, the arm joint is aero-formed.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain.  >> More details

<Main specifications> ・ Driver side: 450mm ・ Passenger seat side: 450mm ・ Twin rail type

■Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details

<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included

■Air valve cap
Following the design of AutoExe wheel nuts, this product is made of aluminum with a red anodized finish, allowing you to enjoy a total coordination. The brass threads that are exposed on mass-produced plastic caps are covered to give a clean and sophisticated impression around the wheel.>> More details

<Main specifications> Aluminum, red anodized + clear coating with AutoExe logo (on both sides), set of 4

■ Shift knob (ball shape) for MT
Made of genuine leather (nappa leather) with a diameter of 51 mm, with an emphasis on operability. The shift knob fits comfortably in the palm of your hand and can be held either sideways or upright. The height can be adjusted to suit your physique and preferences. The AutoExe logo is printed on the top.>> More details

<Main specifications> ・For manual transmission vehicles ・Made of genuine leather (nappa leather) ・Thread size: M10 x 1.25 ・Diameter: 51mm ・Total length: Adjustable from 70 to 88mm ・Stitching: Red/Black/Light Gray (3 colors available)

■ Shift knob (stick shape) for MT
Made of genuine leather (nappa leather) with a small diameter of 42 mm. The shift knob fits comfortably in the palm of your hand and can be held either sideways or upright. The height can be adjusted to suit your build and preferences. The AutoExe logo is printed on the top. >> More details

<Main specifications> ・For manual transmission vehicles ・Made of genuine leather (nappa leather) ・Screw size: manual transmission vehicles: M10 x 1.25 ・Diameter: 42mm ・Total length: adjustable from 73 to 91mm ・Stitching: red/black/light gray (3 colors available)

■ Sports floor mat
A high-quality floor mat set with an impressive red x black gradation that gives the interior a gorgeous color.The material is a soft wool-like fabric made from special chemical fibers in a loop weave.The driver's side is equipped with a large heel pad made of hard fiber that supports accurate pedal work during sports driving, achieving both texture and drivability. >> More details

<Main specifications> ・High-grade wool-like material ・Equipped with a large heel pad (driver's side) ・With aluminum AutoExe logo plate (front left and right) ・One set