DE-03B

DE-03

■ Lowdown spring
A low-down spring that stabilizes handling by lowering the center of gravity and gives a crisp and dynamic feeling to the styling.The vehicle height is -25 to -30 mm compared to mass-produced vehicles that ensure an appropriate stroke.By strengthening the spring rate, it is possible to fully draw out the potential of mass-produced dampers with excellent features.>> More details

＜主な仕様＞・車高-25～-30ｍｍ ・バネ定数(DE5FS/3FS) F:23.5(19.3)R:16.7(16.1) ・バネ定数(DEJFS) F:21.6(19.3)R:16.7(16.1)
Unit N / mm * Normal value in parentheses

■ Sports damper
Although it has the same shape as the mass-produced product, the internal piston adopts a "very low speed valve" that generates precise damping force from the moment it starts moving.It accurately controls changes in the vehicle's posture and achieves a sporty, flat and high-quality ride.It is recommended to use with genuine springs (can be used with lowdown springs).>> More details

<Main specifications> ・ Fixed gas damping force

■ Adjustable stabilizer link
Adjustable link that corrects the deviation of the stabilizer arm angle that occurs when the vehicle height is lowered, such as installing a low down spring.The total length of the link connecting the stabilizer and the car body is adjusted to optimize the arm angle, and the original stabilizer function of the design value is restored.For the front.>> More details

<Main specifications> -Full length adjustable 2-piece set-For front

■ Air filter replacement
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details

<Main specifications> ・ Dry type ・ Disposable type

■ Premier tail muffler
A series with a sophisticated and profound feeling. The 110X95mm oval-shaped tail end has a very mature texture.With a large-capacity straight structure silencer that has been carefully tuned for a narrow main pipe diameter and internal structure, it achieves both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise of the room.>> More details

<Main specifications> -Stainless steel-Straight structure silencer-Main diameter: Ф60.5-Tail diameter: Ф110 x 95-Compliant with safety standards

■ Street sports brake pads
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details

<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃

■ Street brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance.>> More details

<Main specifications> ・ 6 slits on one side ・ 1 piece type

■ Sports oil filter
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details

<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production

■ Oil filler cap
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression.　>> More details

<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo

■ Oil level gauge grip
An item that replaces the resin grip of a mass-produced oil level gauge with aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.DIY installation is possible with the attached dedicated tool. Compatible with a wide range of vehicles equipped with the SKYACTIV engine.　>> More details

<Main specifications> -Aluminum-Red alumite-With AutoExe logo-Includes a dedicated tool for mounting

■ Optima Battery
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters.>> More details

<Main specifications> -Maintenance-free type made by Optima Battery

■ Aero sports wiper blade
An aero type wiper blade is used for the main body.By adding a deflector with fins, the arm joint is aero-formed.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain. >> More details

<Main specifications> ・ Driver side: 550mm ・ Passenger seat side: 430mm ・ Twin rail type

■ Door handle cover & protector set
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details

<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 4 ・ PVC protector x 4 ・ One set

■Door handle protector
Made of carbon-like PVC that protects the paint around the door handle, which is easily damaged when opening and closing. The lineup includes three colors: black, silver, and red (a color similar to Soul Red Crystal Metallic) that can be selected according to the body color.>>Click here for part numbers and prices

<Main specifications> - Carbon-like AutoExe logo included - PVC double-sided tape adhesive - Left and right set - Front/rear common use (1 sets required for 2 car)

■Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details

<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included

■Air valve cap
Following the design of AutoExe wheel nuts, this product is made of aluminum with a red anodized finish, allowing you to enjoy a total coordination. The brass threads that are exposed on mass-produced plastic caps are covered to give a clean and sophisticated impression around the wheel.>> More details

<Main specifications> Aluminum, red anodized + clear coating with AutoExe logo (on both sides), set of 4

■ Shift knob (ball shape) for MT
Made of genuine leather (nappa leather) with a diameter of 51 mm, with an emphasis on operability. The shift knob fits comfortably in the palm of your hand and can be held either sideways or upright. The height can be adjusted to suit your physique and preferences. The AutoExe logo is printed on the top.>> More details

<Main specifications> ・For manual transmission vehicles ・Made of genuine leather (nappa leather) ・Thread size: M10 x 1.25 ・Diameter: 51mm ・Total length: Adjustable from 70 to 88mm ・Stitching: Red/Black/Light Gray (3 colors available)

■ Shift knob (stick shape) for MT
Made of genuine leather (nappa leather) with a small diameter of 42 mm. The shift knob fits comfortably in the palm of your hand and can be held either sideways or upright. The height can be adjusted to suit your build and preferences. The AutoExe logo is printed on the top. >> More details

<Main specifications> ・For manual transmission vehicles ・Made of genuine leather (nappa leather) ・Screw size: manual transmission vehicles: M10 x 1.25 ・Diameter: 42mm ・Total length: adjustable from 73 to 91mm ・Stitching: red/black/light gray (3 colors available)