Model LINE UP
MAZDA3/Axela update information
2024-04-18
2024-02-29
BP-06S
A more fearless aero form is completed.
BP-3S that releases the potential of MAZDA06.
AutoExe continues to propose numerous sports versions for MAZDA3 for highly sensitive drivers who are not satisfied with mass production specifications.This time, we decided to upgrade the styling to sharpen the design that should be called extraordinary.In addition to well-established items such as a front under spoiler with a twin duct motif and a sports muffler and garnish with four pipes cut off from the tail end, a side under spoiler with a wide and low bottom end and a rear side with a bold design of the wind flow. A cowl was additionally set to complete a more complete appearance.
In terms of functionality, the BP-06S's signature ``High Limit Sports'' design has a solid and tough handling feel with consideration for circuit driving, as well as the ``Street Best Sports'' specs, which are designed for comfort in everyday use. We have a rich and wide lineup ranging from...Furthermore, a new quick shifter for manual transmission vehicles has been installed for quick gear changes, and the number of models equipped with a brake pedal brace, which contributes to a direct brake feel, has been expanded.We want you to fully unleash its extraordinary potential by tuning it according to the stage you're riding.
Styling kit
● The tires and wheels in the photo are examples of installation.
Front under spoiler
The twin duct motif expresses a hot run.Piano black / matte black 2 colors painted.
Front grill
Trade in the Mazda emblem.Fin type with piano black on the surface and matte black paint on the recesses.
Side under spoiler
Add a sense of stability to the bottom line of the elegant side view.Painted piano black.Equipped with AutoExe ornaments on the left and right.
Rear side cowl
Boldly design the flow of wind with a duct motif.Give it a sporty accent. (Polymetal Gray M/Soul Red Crystal M/Machine Gray Premium M painted products are set)
Muffler garnish
Garnish for sports muffler.The mass-produced bumper is cut and mounted to form an aggressive form.
Rear roof spoiler
Floating type full of sports mind.Painted piano black. Equipped with AutoExe ornament.
Sports side visor
Equipped with a ventilation mechanism that actively discharges the air inside the vehicle by using the negative pressure generated during driving.
A pillar garnish
A carbon-like left and right set with an eye-catching fin design inspired by the flow of wind.You can enjoy total coordination with door mirror covers, etc. Includes AutoExe logo.Double-sided tape attached.
Door mirror cover
Matte finish carbon style left and right set with a subtle fin design. Tighten the body by installing it at the same time as the A-pillar garnish. Includes AutoExe logo sticker.Double-sided tape attached.
Fuel lid cover
A mechanical one-point item that gives off a metallic feel.Double-sided tape is attached to the mass-produced fuel lid cover.
Door handle cover & protector set
A matte carbon finish that protects the paint on the door handle and gives the styling a sporty look.
Front under spoiler dimensional drawing
The stated dimensions are the difference from the mass production bumper.Please use it as a guide when installing a styling kit such as road clearance.
The product is compatible with safety equipment such as millimeter-wave radar (SBS / MRCC) and AT false start suppression control, but it may not operate properly depending on the driving conditions, and its operation is not guaranteed.
■ BP-06S Styling Kit MAZDA3 (BP) For fastback
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Front under spoiler | Fastback | BPA1 V4 900 | ¥90,200 (¥ 82,000) | Piano black / matte black 2 colors painted ABS resin drilling required | D | 1.0 h |
| Front grill | Fastback | MBP2510 | ¥90,200 (¥ 82,000) | Piano black / matte black 2 colors painted ABS resin ※ 1 | F | 1.0 h |
| Side under spoiler | Fastback | BPA1 V4 910 | ¥93,500 (¥ 85,000) | Piano Black Painted AutoExe Ornament Included Made of PPE | D | 2.0 h |
| Rear side cowl | Fastback | BPA1 V3 060 2M BPA1 V3 060 PR BPA1 V3 060 SY BPA1 V3 060BB | ¥68,200 (¥ 62,000) ¥68,200 (¥ 62,000) ¥68,200 (¥ 62,000) ¥55,000 (¥ 50,000) | Machine Gray Premium Metallic Painted * 2 * 3 Made of ABS, left and right set, double-sided tape adhesive Soul Red Crystal Metallic Painted * 2 * 3 Made of ABS, left and right set, double-sided tape adhesive polymetal gray metallic painted * 2 * 3 Made of ABS, left and right set, double-sided tape adhesive Paint required ABS made left and right set ※ 3 Double-sided tape adhesion | D | 0.5 h |
| Muffler garnish | Fastback | MBP2410 | ¥30,800 (¥ 28,000) | For vehicles with sports muffler (MBP8Y50 / 8Y60) Cannot be installed separately AES black satin finish (no painting required) Rear bumper excision required Cannot be installed at the same time as the rear under panel (MBP2400) | D | 1.0 h |
| Rear roof spoiler | Fastback | BPA2 V4 920 | ¥90,200 (¥ 82,000) | Piano black painted AutoExe ornament included FRP made drilling required | D | 1.0 h |
| Sports side visor | Fastback | BPA1 V3 700 | ¥27,500 (¥ 25,000) | Smoke acrylic resin 4 piece set with ventilation mechanism | D | 0.5 h |
| A pillar garnish | Fastback | BPA1 V3 070 | ¥13,200 (¥ 12,000) | With carbon-like fin design, made of weather-resistant ABS, with AutoExe logo, double-sided tape adhesive | D | 0.5 h |
| Door mirror cover | Fastback | BPA1 V3 650 | ¥38,500 (¥ 35,000) | Made of AES with carbon-like fin design, AutoExe logo sticker included, double-sided tape adhesive | D | 0.5 h |
| Fuel lid cover | Fastback | BPA1 V3 020 | ¥11,000 (¥ 10,000) | ABS chrome plated AutoExe logo double-sided tape adhesive | D | 0.3 h |
| Door handle cover & protector set | Fastback | BPA1 V3 110 | ¥29,260 (¥ 26,600) | Carbon-like weatherproof ABS cover x 4 PVC protector x 4 XNUMX set | D | 1.0 h |
※ 1 A part of the front grill may be reflected on the screen of the front monitor.Also, when installed on a vehicle with a 360° view monitor, it may be necessary to adjust the aiming of the camera.
※ 2 The paint color may not exactly match the body color.
※ 3 Vehicles that do not have a rear corner ultrasonic sensor will have a hole for the sensor.
<For customers considering simultaneous installation when purchasing a new car>
Some styling kits and functional parts are available as Mazda dealer options.For details, see the Mazda Motor Corporation website.[Accessory lineup]Also, please visit the sales staff of the sales company.
BP-1
Functional parts
Suspension
"A New Driving Sensation" Suspension is at the core of sporty driving.Our aim is to handle at will beyond the framework of mass-produced vehicles.For drivers who want to enjoy driving positively, it is not just hard and soft, but it provides a street best ride with refined dynamic sensitivity performance such as initial response at the time of steering and transient characteristics of roll. >> Read more
■ Lowdown spring
A low-down spring that tightens the styling sporty and improves handling by lowering the center of gravity.Not too low, not too strong ... By keeping the vehicle height to -20mm and the spring constant to about 110%, the suspension stroke is secured even in combination with mass-produced dampers, and consideration is given so that the damping ratio does not drop too much. ing.>> More details
A low-down spring that tightens the styling sporty and improves handling by lowering the center of gravity.Not too low, not too strong ... By keeping the vehicle height to -20mm and the spring constant to about 110%, the suspension stroke is secured even in combination with mass-produced dampers, and consideration is given so that the damping ratio does not drop too much. ing.>> More details
<Main specifications> ・ Vehicle height: -20mm ・ Spring constant isplease use this form. for more information.
■ Sports damper
Although it has the same shape as the mass-produced product, the internal piston adopts a "very low speed valve" that generates precise damping force from the moment it starts moving.It accurately controls changes in the vehicle's posture and achieves a sporty, flat and high-quality ride.It is recommended to use with genuine springs (can be used with lowdown springs).>> More details
Although it has the same shape as the mass-produced product, the internal piston adopts a "very low speed valve" that generates precise damping force from the moment it starts moving.It accurately controls changes in the vehicle's posture and achieves a sporty, flat and high-quality ride.It is recommended to use with genuine springs (can be used with lowdown springs).>> More details
<Main specifications> ・ Fixed gas damping force
■ Street Sports Suspension Kit
The best street model that AutoExe thinks.A twin tube damper that quickly raises the damping force from the very low speed range and controls the roll speed based on dynamic Kansei engineering. Achieves linear maneuverability without compromising ride quality, such as setting the vehicle height based on -20mm.>> More details
<Main specifications> ・ Vehicle height adjustment type
The best street model that AutoExe thinks.A twin tube damper that quickly raises the damping force from the very low speed range and controls the roll speed based on dynamic Kansei engineering. Achieves linear maneuverability without compromising ride quality, such as setting the vehicle height based on -20mm.>> More details
<Main specifications> ・ Vehicle height adjustment type
■ Club Sports Suspension Kit
Hard specifications that cut down the comfort to the limit that we can tolerate and convert the margin to exercise performance.The standard vehicle height is -30mm.In order to maintain accurate operability even in winding and hard circuit driving, a monotube type inverted damper with excellent heat conversion ability and rigidity under high load and a series-wound spring with a spring constant that rises linearly are adopted.Creates a solid driving sensation with a high sense of change regardless of the speed range.>> More details
<Main specifications> ・ Vehicle height adjustment type
Hard specifications that cut down the comfort to the limit that we can tolerate and convert the margin to exercise performance.The standard vehicle height is -30mm.In order to maintain accurate operability even in winding and hard circuit driving, a monotube type inverted damper with excellent heat conversion ability and rigidity under high load and a series-wound spring with a spring constant that rises linearly are adopted.Creates a solid driving sensation with a high sense of change regardless of the speed range.>> More details
<Main specifications> ・ Vehicle height adjustment type
■ Adjustable stabilizer link
When the vehicle height is down, the angle of the lower arm changes.As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect.This product corrects the arm angle when the vehicle height is lowered by adjusting the link length.Optimize the stabilizer function.>> More details
When the vehicle height is down, the angle of the lower arm changes.As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect.This product corrects the arm angle when the vehicle height is lowered by adjusting the link length.Optimize the stabilizer function.>> More details
<Main specifications> ・ Full length adjustable XNUMX-piece set ・ For front
■ Sports stabilizer
A stabilizer that connects the left and right suspension arms with a pipe and suppresses roll by the spring effect.This product has moderately strengthened spring rate from mass production.Stabilizes the posture when cornering while keeping controllability.Since the spring effect hardly occurs when going straight, the effect on the ride quality is minimal.>> More details
A stabilizer that connects the left and right suspension arms with a pipe and suppresses roll by the spring effect.This product has moderately strengthened spring rate from mass production.Stabilizes the posture when cornering while keeping controllability.Since the spring effect hardly occurs when going straight, the effect on the ride quality is minimal.>> More details
<Main specifications> ・ Front: Solid Φ25.0 ・ Spring constant (compared to mass-produced vehicles): 141%
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Low down spring | Diesel 2WD car※ 1 Gasoline hybrid e-SKYACTIV X 2WD vehicle※ 1 Gasoline hybrid 2WD vehicle/Gasoline 2.0L 2WD vehicle (excluding e-SKYACTIV X)※ 1 Gasoline 1.5L 2WD car※ 1 | BPA1 V5 720 BPA2 V5 720 BPA3 V5 720 BPA4 V5 720 | ¥41,800 (¥ 38,000) | Vehicle height-20mm Spring constant: Fr24.3 Rr: 41.2N / mm Vehicle height-20mm Spring constant: Fr24.3 Rr: 39.6N / mm Vehicle height-20mm Spring constant: Fr21.6 Rr: 41.2N / mm Vehicle height-20mm Spring constant: Fr21.2 Rr: 41.2N / mm | D | 2.6 h | |
| Sports damper | All cars | MBP7700 | ¥77,000 (¥ 70,000) | Compatible with fixed damping force mass production springs / AutoExe springs | D | 2.5 h | |
| Street Sports Suspension Kit | All cars ※ 1 | MBP7850 | ¥195,800 (¥ 178,000) | Vehicle height adjustment type Damping force fixed type Spring constant: Fr: 31.4 Rr: 46.1N / mm Adjustment range (mm) -5 to -25 (Gasoline 1.5L vehicle: -5 to -20) | D | 3.2 h | |
| Club Sports Suspension Kit | All cars | MBP7970 | ¥294,800 (¥ 268,000) | Monotube full length adjustment type damping force 24 steps adjustment type Recommended vehicle height-30mm Spring constant: Fr: 95.0 Rr: 68.61N / mm | F | 3.2h | |
| Adjustable stabilizer link | front | All cars ※ 2 | MBP7605 | ¥24,200 (¥ 22,000) | Full length adjustable left and right set of 2 | D | 0.5 h |
| Sports stabilizer | front | All cars | MBP7600 | ¥30,800 (¥ 28,000) | Solid φ25.0 Spring constant (compared to mass-produced vehicles) 141% | D | 2.0 h |
※ 1 When installed in a car with a 360 ° view monitor, it may be necessary to adjust the aiming of the camera.
※ 2 When installing the Street Sports Suspension Kit (MBP7850) / Club Sports Suspension Kit (MBP7970), it is not necessary to install the same product due to its functionality.
※ 2 When installing the Street Sports Suspension Kit (MBP7850) / Club Sports Suspension Kit (MBP7970), it is not necessary to install the same product due to its functionality.
Bodysuit
In order to enhance the sense of unity between the driver and the car, tuning to train the body is the basis.By suppressing slight distortion of each part of the body due to input from the road surface such as during cornering, the movement of the suspension initial operating area absorbed by the distortion is drawn out, and handling with a direct feeling without delay of reaction from the moment when the steering is started Contribute to. >> Read more
■ Strut tower bar
By connecting the left and right strut towers, the body rigidity is increased.The steel oval shaft, which is advantageous in terms of rigidity, and the one-piece structure ensure the highest level of strength for a two-point system.It is effective when installed separately, but it is best to use it together with the floor crossbar and lower arm bar that are set at the same time.>> More details
<Main specifications> -Steel 2-piece structure XNUMX-point type
By connecting the left and right strut towers, the body rigidity is increased.The steel oval shaft, which is advantageous in terms of rigidity, and the one-piece structure ensure the highest level of strength for a two-point system.It is effective when installed separately, but it is best to use it together with the floor crossbar and lower arm bar that are set at the same time.>> More details
<Main specifications> -Steel 2-piece structure XNUMX-point type
■ Center floor bar
It suppresses distortion near the center of the body monocoque, which cannot be compensated by strut tower bars and floor crossbars, and compensates for the "annular structure" effect of the SKYACTIV body.I try to have a low center of gravity layout that does not sacrifice the leg space of the rear seats as much as possible.>> More details <Main specifications> -Steel oval shaft 1-piece configuration 4-point type
It suppresses distortion near the center of the body monocoque, which cannot be compensated by strut tower bars and floor crossbars, and compensates for the "annular structure" effect of the SKYACTIV body.I try to have a low center of gravity layout that does not sacrifice the leg space of the rear seats as much as possible.>> More details <Main specifications> -Steel oval shaft 1-piece configuration 4-point type
■ Floor crossbar
By crawling the bar on the floor, the effect is similar to that of a tower bar.There are three mounting points, such as a high-strength seat mounting part, and there is no need to drill holes in the body.There is no impact on the utility space.It is effective when used alone, but it is recommended to install it together with the strut tower bar.>> More details
<Main specifications> -Steel 2-piece structure 3-point type
By crawling the bar on the floor, the effect is similar to that of a tower bar.There are three mounting points, such as a high-strength seat mounting part, and there is no need to drill holes in the body.There is no impact on the utility space.It is effective when used alone, but it is recommended to install it together with the strut tower bar.>> More details
<Main specifications> -Steel 2-piece structure 3-point type
■ Lower arm bar (front)
In mass-produced vehicles, deformation is suppressed by connecting the bases of the left and right lower arms, which are the suspension mounting base points of the open structure, with steel oval pipes.Supports accurate handling by regulating unnecessary alignment changes.Recommended for use with strut tower bars, floor cross bars, etc.>> More details
<Main specifications> -Steel oval shaft 1-piece structure 2-point type
In mass-produced vehicles, deformation is suppressed by connecting the bases of the left and right lower arms, which are the suspension mounting base points of the open structure, with steel oval pipes.Supports accurate handling by regulating unnecessary alignment changes.Recommended for use with strut tower bars, floor cross bars, etc.>> More details
<Main specifications> -Steel oval shaft 1-piece structure 2-point type
■ Torsion beam stiffener
A tough gusset (reinforcing plate) to be attached to the torsion beam mounting parts on the left and right of the rear suspension.It suppresses unnecessary distortion of the same part that occurs when cornering, etc., and supports accurate handling.Best used with the front lower arm bar. >> More details
<Main specifications> -Steel 2-piece structure 2-point type
A tough gusset (reinforcing plate) to be attached to the torsion beam mounting parts on the left and right of the rear suspension.It suppresses unnecessary distortion of the same part that occurs when cornering, etc., and supports accurate handling.Best used with the front lower arm bar. >> More details
<Main specifications> -Steel 2-piece structure 2-point type
■ Member brace set
An evolved version of the lower arm bar.By mounting a steel frame with a three-dimensional truss structure on the body floor, the chassis rigidity of the highest level as a bolt-on part is obtained.Combined with a strut tower bar that reinforces the front and back of the upper part of the body, a tough monocoque body with two upper and lower stages is completed.Front and back set. >> More details
<Main specifications> -Steel oval shaft with all 3 pieces
An evolved version of the lower arm bar.By mounting a steel frame with a three-dimensional truss structure on the body floor, the chassis rigidity of the highest level as a bolt-on part is obtained.Combined with a strut tower bar that reinforces the front and back of the upper part of the body, a tough monocoque body with two upper and lower stages is completed.Front and back set. >> More details
<Main specifications> -Steel oval shaft with all 3 pieces
■ Motion control beam
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with a friction type damper with ultra-high damping, it creates a street best ride with strength and suppleness.A set of two front and back.With a dedicated mounting bracket. >> More details
<Main specifications> -Friction type damper + steel shaft Front and rear set with mounting bracket
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with a friction type damper with ultra-high damping, it creates a street best ride with strength and suppleness.A set of two front and back.With a dedicated mounting bracket. >> More details
<Main specifications> -Friction type damper + steel shaft Front and rear set with mounting bracket
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Strut tower bar | front | All cars | BPA1 V5 420 | ¥29,700 (¥ 27,000) | Steel 1-piece structure 2-point type | D | 0.5 h |
| Center floor bar | 2WD car 4WD car | MBP4D00 MBP4D10 | ¥35,200 (¥ 32,000) | Steel 1-piece structure 4-point type | D | 0.5 h | |
| Floor crossbar | rear | All cars | MBP4500 | ¥19,800 (¥ 18,000) | Steel 1-piece structure 3-point type | D | 0.8 h |
| Lower arm bar | front | All cars ※ 1 | MBP4B00 | ¥19,800 (¥ 18,000) | Steel 1-piece structure 2-point type | D | 0.5 h |
| Torsion beam stiffener | All cars ※ 1 | MBP4F00 | ¥17,600 (¥ 16,000) | Steel 2-piece structure 2-point type | D | 0.5 h | |
| Member brace set | All cars ※ 1 | MBP4700 | ¥79,200 (¥ 72,000) | Steel 3-piece structure 10-point front and rear set | D | 1.5 h | |
| Motion control beam | All cars | MBP4900A | ¥104,500 (¥ 95,000) | Front and rear set with friction damper + steel shaft mounting bracket | E | 1.0 h |
※ 1 The member brace set and lower arm bar / torsion beam stiffener cannot be installed at the same time.
Intake & Exhaust
In the intake / exhaust tune, which is directly linked to the pleasure of driving, the point is not to improve the peak power, but to react to instantly convey the driver's intention to the car.The accelerator response has been refined based on the air filter and muffler with moderately reduced resistance.The restrained sports sound also deepens communication between the driver and the car. >> Read more
■ Air filter replacement
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details
<Main specifications> ・ Dry type ・ Disposable type
A genuine shape product that easily and effectively improves intake efficiency by utilizing the air cleaner box of mass-produced vehicles.The drywall with excellent breathability has little effect on the airflow sensor and is easy to maintain.Disposable type and reasonable price.>> More details
<Main specifications> ・ Dry type ・ Disposable type
■ Ram air intake system
It consists of a semi-open type real carbon cleaner box with a specially designed intake path and a special cylindrical filter.Fresh air is actively introduced from two locations, the mass-produced intake duct that introduces air from the rear of the front grill and the box opening.It increases the amount of intake air to promote fuel injection and obtains power and torque from the normal range.The dry sports sound that excites driving is also attractive.>> More details
<Main specifications> ・Carbon box with special air filter included
It consists of a semi-open type real carbon cleaner box with a specially designed intake path and a special cylindrical filter.Fresh air is actively introduced from two locations, the mass-produced intake duct that introduces air from the rear of the front grill and the box opening.It increases the amount of intake air to promote fuel injection and obtains power and torque from the normal range.The dry sports sound that excites driving is also attractive.>> More details
<Main specifications> ・Carbon box with special air filter included
■ Intake suction kit
Specifications that secure the maximum effective flow path area of intake air and reduce intake resistance.The material used is multi-layer polystar silicon, which has a high effect of suppressing deformation due to negative suction pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details
<Main specifications> -Made of Polystar Silicon Hose-Detailed specifications areplease use this form. for more information.
Specifications that secure the maximum effective flow path area of intake air and reduce intake resistance.The material used is multi-layer polystar silicon, which has a high effect of suppressing deformation due to negative suction pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room.>> More details
<Main specifications> -Made of Polystar Silicon Hose-Detailed specifications areplease use this form. for more information.
■ Premier tail muffler (for diesel vehicles)
A series with a sophisticated and profound feeling. The 110x95mm oval-shaped tail end has a very mature texture.It has been tuned exclusively for diesel vehicles to achieve both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise of the interior.>> More details
<Main specifications> ・ Pipe diameter: Φ60.5 ・ Tail diameter: 110 × 95 × 2
A series with a sophisticated and profound feeling. The 110x95mm oval-shaped tail end has a very mature texture.It has been tuned exclusively for diesel vehicles to achieve both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise of the interior.>> More details
<Main specifications> ・ Pipe diameter: Φ60.5 ・ Tail diameter: 110 × 95 × 2
■ Premier tail muffler (for gasoline vehicles)
A series with a sophisticated and profound feeling. The 110X95mm oval-shaped tail end has a very mature texture.With a large-capacity straight structure silencer that has been carefully tuned for a narrow main pipe diameter and internal structure, it achieves both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise of the room.>> More details
<Main specifications> ・ Pipe diameter: Φ60.5 ・ Tail diameter: 110 × 95 × 2
A series with a sophisticated and profound feeling. The 110X95mm oval-shaped tail end has a very mature texture.With a large-capacity straight structure silencer that has been carefully tuned for a narrow main pipe diameter and internal structure, it achieves both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise of the room.>> More details
<Main specifications> ・ Pipe diameter: Φ60.5 ・ Tail diameter: 110 × 95 × 2
■ Sports muffler
Aggressive 4-piece slash tail specification that can be installed at the same time as the muffler garnish.In terms of functionality, improving exhaust efficiency has been given top priority, and the multi-stage expansion type of mass-produced vehicles has been changed to a straight structure to reduce back pressure loss.The pipe layout and silencer capacity have been carefully examined exclusively for diesel and gasoline vehicles to obtain agile response.By muting without using glass wool, it creates a sport sound with good clearness without stagnation up to the high register.>> More details
<Main specifications> ・ Stainless steel ・ Main pipe diameter φ60.5 ・ Tail diameter 80mm (× 4)
Aggressive 4-piece slash tail specification that can be installed at the same time as the muffler garnish.In terms of functionality, improving exhaust efficiency has been given top priority, and the multi-stage expansion type of mass-produced vehicles has been changed to a straight structure to reduce back pressure loss.The pipe layout and silencer capacity have been carefully examined exclusively for diesel and gasoline vehicles to obtain agile response.By muting without using glass wool, it creates a sport sound with good clearness without stagnation up to the high register.>> More details
<Main specifications> ・ Stainless steel ・ Main pipe diameter φ60.5 ・ Tail diameter 80mm (× 4)
■ Muffler garnish
Garnish for sports muffler.The mass-produced bumper is cut and mounted to form an aggressive form.
<Main specifications> ・ Black (pear-skin) ・ Made by AES ・ Cannot be installed separately
Garnish for sports muffler.The mass-produced bumper is cut and mounted to form an aggressive form.
<Main specifications> ・ Black (pear-skin) ・ Made by AES ・ Cannot be installed separately
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Air filter replacement | Diesel vehicle, gasoline 1.5L vehicle, gasoline hybrid e-SKYACTIV X vehicle Gasoline hybrid vehicle/gasoline 2.0L vehicle (excluding e-SKYACTIV X) | MBP9A00 MBP9A10 | ¥9,350 (¥ 8,500) | Dry-type disposable (disposable) type | D | 0.3 h |
| Ram air intake system | Diesel Car Gasoline hybrid vehicle/gasoline 2.0L vehicle (excluding e-SKYACTIV X) | BPA1 V5 900 BPA2 V5 900 | ¥112,200 (¥ 102,000) | Carbon box Dedicated air filter included | F | 1.0 h |
| Intake suction kit | Diesel Car Gasoline hybrid vehicle/gasoline 2.0L vehicle (excluding e-SKYACTIV X) Gasoline 1.5L car | MBP9600 MBP9610 MBP9620 | ¥19,800 (¥ 18,000) ¥17,600 (¥ 16,000) ¥17,600 (¥ 16,000) | Silicone hose | D | 0.2 h 0.3 h 0.3 h |
| Premier tail muffler | Fastback diesel car※ 1 Fastback gasoline hybrid car/gasoline car ※ 2 Sedan Gasoline hybrid 2WD vehicle/Gasoline 2WD vehicle (excluding e-SKYACTIV X)※ 4 | BPA1 V5 810 BPA2 V5 810 BPA3 V5 810 | ¥104,500 (¥ 95,000) ¥129,800 (¥ 118,000) ¥129,800 (¥ 118,000) | Stainless steel main pipe diameter φ60.5 Tail diameter 110 × 95mm (× 2) | D | 0.7 h |
| Sports muffler | Fastback diesel car * 1 * 3 Fastback gasoline hybrid vehicle/gasoline vehicle (excluding e-SKYACTIV X)* 3 * 4 | MBP8Y50 MBP8Y60 | ¥134,200 (¥ 122,000) ¥158,400 (¥ 144,000) | Stainless steel main pipe diameter φ60.5 Tail diameter 80mm (× 4) | F | 0.7 h |
| Muffler garnish (For sports muffler installation) | Fastback ※ 3 | MBP2410 | ¥30,800 (¥ 28,000) | AES black satin finish (no painting required) | D | 1.0 h |
※ 1 Cannot be installed on 2WD 16-inch vehicles of XD PROACTIVE and XD PROACTIVE Turing Selection.
※ 2 Cannot be installed on BPFP 4WD vehicles/BP5R 4WD vehicles/BP5P 4WD vehicles, and e-SKYACTIV X vehicles (all BPEK3R vehicles/BPEP 4WD vehicles/BPEP MT vehicles/BPEP-102511~).
※ 3 Cannot be installed separately.It is necessary to install the sports muffler (MBP8Y50 / 8Y60) and muffler garnish (MBP2410) at the same time.It is necessary to cut off the rear bumper for installation.
※ 4 Cannot be installed on BPFP 4WD vehicles/BP5R 4WD vehicles/BP5P 4WD vehicles/all BPEK3R vehicles/all BPEP vehicles.
※ 2 Cannot be installed on BPFP 4WD vehicles/BP5R 4WD vehicles/BP5P 4WD vehicles, and e-SKYACTIV X vehicles (all BPEK3R vehicles/BPEP 4WD vehicles/BPEP MT vehicles/BPEP-102511~).
※ 3 Cannot be installed separately.It is necessary to install the sports muffler (MBP8Y50 / 8Y60) and muffler garnish (MBP2410) at the same time.It is necessary to cut off the rear bumper for installation.
※ 4 Cannot be installed on BPFP 4WD vehicles/BP5R 4WD vehicles/BP5P 4WD vehicles/all BPEK3R vehicles/all BPEP vehicles.
Brake
The first thing that is required of a brake is the ability to stop safely.And in order to enjoy running freely, controllability that can decelerate at will is required.The brake pad, which has a small change in the coefficient of friction (μ) even during continuous braking, and the brace, which increases the rigidity of the pedal mounting part and eliminates the delay in effectiveness, realizes the effect of synchronizing with the driver's sensibility. >> Read more
■ Street sports brake pads
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details
<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities.>> More details
<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃
■ Club sports brake pads
Sometimes to the circuit ...A sports pad that aims for "deceleration at will" that synchronizes with the driver's sensibility in high load areas such as continuous corners and full braking from straight.The material is a blend of carbon and a metal material with excellent fade resistance.It balances the conflicting frictional force and the suppression of rotor aggression at a high level. >> More details
<Main specifications> ・ Graphite metal friction material ・ Rotor proper temperature: 50-800 ℃
Sometimes to the circuit ...A sports pad that aims for "deceleration at will" that synchronizes with the driver's sensibility in high load areas such as continuous corners and full braking from straight.The material is a blend of carbon and a metal material with excellent fade resistance.It balances the conflicting frictional force and the suppression of rotor aggression at a high level. >> More details
<Main specifications> ・ Graphite metal friction material ・ Rotor proper temperature: 50-800 ℃
■ Street brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance. >> More details
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance. >> More details
Type
■ Brake pedal brace
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details
The bracket of the pedal mounting part, which causes slight distortion during brake operation, is three-dimensionally reinforced with steel braces to ensure rigidity.It improves the delay in reaction from when the pedal is pressed until the brake is applied, and contributes to a direct effect.>> More details
<Main specifications> -Steel 2-piece structure
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time | |
|---|---|---|---|---|---|---|---|
| Street sports brake pads | front rear | All cars All cars | MBP5A10 MBP5A20 | ¥16,500 (¥ 15,000) ¥14,300 (¥ 13,000) | Non-asbestos rotor Appropriate temperature: 0-400 ℃ | D | 0.5 h |
| Club sports brake pads | front rear | All cars All cars | MBP5B10 MBP5B20 | ¥25,300 (¥ 23,000) ¥23,100 (¥ 21,000) | Graphite metal rotor Appropriate temperature: 50-800 ℃ | D | 0.5 h |
| Street brake rotor | front front rear | Diesel vehicle, gasoline hybrid vehicle, gasoline 4WD vehicle Gasoline 2WD car All cars | MDM5A50 MBP5A50 MBM5A55 | ¥46,200 (¥ 42,000) ¥44,000 (¥ 40,000) ¥41,800 (¥ 38,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
| Brake pedal brace | All vehicles except gasoline hybrid vehicles ※ 1 Gasoline hybrid vehicle (excluding e-SKYACTIV X MT vehicle) | MBP4950 BPA1 V5 570 | ¥19,800 (¥ 18,000) | Steel 2-piece configuration | D | 0.5 h |
※ 1Cannot be installed on BPFJ3R/BPFJ3P/BPEK3R/BPEP.In addition, genuine stop lamp switch (BN7N-66-490A) x 1 is required separately for installation.
Engine & Drivetrain
A group of parts that draws out the full potential of the engine and converts it into traction.A sports clutch set and flywheel that support a pleasant gear change.Limited slip differential, which allows you to actively enjoy the change in the posture of the car when cornering, has created transient characteristics that eliminate sudden movements as much as possible while enhancing the direct feeling with the car.
■ Turbo pipe
By optimizing the layout of the turbo pipe that guides the air supercharged by the turbine to the intercooler, and combining the aluminum elbow pipe whose inner wall is mirrored as much as possible and the 4-layer polyster silicon that has a high deformation suppressing effect, the hose expands due to pressurization. And suppresses the resistance of the air flow path.As a result, the boost pressure rises faster and turbo lag is reduced.Improve the response from the beginning of stepping on the accelerator.The product comes with a gasket required for installation. >> More details
<Main specifications> -Aluminum pipe (anodized) + silicon hose / band / gasket included
By optimizing the layout of the turbo pipe that guides the air supercharged by the turbine to the intercooler, and combining the aluminum elbow pipe whose inner wall is mirrored as much as possible and the 4-layer polyster silicon that has a high deformation suppressing effect, the hose expands due to pressurization. And suppresses the resistance of the air flow path.As a result, the boost pressure rises faster and turbo lag is reduced.Improve the response from the beginning of stepping on the accelerator.The product comes with a gasket required for installation. >> More details
<Main specifications> -Aluminum pipe (anodized) + silicon hose / band / gasket included
■ Sports oil filter
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details
<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details
<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production
■ Sports clutch line
Uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and less expansion due to hydraulic pressure than the rubber used in mass-produced vehicles.Contributes to a direct clutch feel.In addition, PVC coating is applied to protect the hose for safety. >> More details
<Main specifications> -Stainless steel mesh PTFE + PVC coating
Uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and less expansion due to hydraulic pressure than the rubber used in mass-produced vehicles.Contributes to a direct clutch feel.In addition, PVC coating is applied to protect the hose for safety. >> More details
<Main specifications> -Stainless steel mesh PTFE + PVC coating
■ Quick shifter
By changing the lever ratio of the shift select arm on the transaxle inside the engine room, the stroke has been shortened.It is possible to adjust the stroke to a total of 13 levels, ranging from 41% to 3% compared to mass production, depending on the driver's preference.In addition, rigidity has been increased by changing the interior shift lever connection part from a mass-produced rubber bush to a rigid mount.Achieve a direct and quick feeling.>> More details
<Main specifications>・Mass production ratio: 13%, 28%, 41% Shorter stroke (3-stage adjustment type)
By changing the lever ratio of the shift select arm on the transaxle inside the engine room, the stroke has been shortened.It is possible to adjust the stroke to a total of 13 levels, ranging from 41% to 3% compared to mass production, depending on the driver's preference.In addition, rigidity has been increased by changing the interior shift lever connection part from a mass-produced rubber bush to a rigid mount.Achieve a direct and quick feeling.>> More details
<Main specifications>・Mass production ratio: 13%, 28%, 41% Shorter stroke (3-stage adjustment type)
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|---|---|---|---|---|---|---|
| Turbo pipe | Diesel Car | MBP3960 | ¥52,800 (¥ 48,000) | Aluminum pipe Silicon hose / band / gasket included | D | 0.8 h |
| Sports oil filter | Gasoline hybrid vehicle/gasoline vehicle | A00182 | ¥3,080 (¥ 2,800) | Built-in strong magnet Filtration area expanded by about 5% compared to mass production | D | 0.1 h |
| Sports clutch line | MT car | MBP6500 | ¥11,000 (¥ 10,000) | Stainless mesh PTFE hose + PVC coating | D | 0.5 h |
| Quick shifter | Gasoline hybrid MT car/Gasoline 2.0L MT car | BPA1 V5 630 | ¥60,500 (¥ 55,000) | Mass production ratio: 13%, 28%, 41% Shorter stroke (3-stage adjustable type) | F | 1.5 h |
Utility
In order to enjoy everyday driving, I want to pay attention not only to running but also to the texture and usability of the appearance.Please also pay attention to utility items with functionality not found in mass-produced cars, such as a side visor with a ventilation mechanism that tightens the style with a sporty aero form.
■ Oil filler cap
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details
<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details
<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo
■ Oil level gauge grip
An item that replaces the resin grip of a mass-produced oil level gauge with aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.DIY installation is possible with the attached dedicated tool. Compatible with a wide range of vehicles equipped with the SKYACTIV engine. >> More details
<Main specifications> -Aluminum-Red alumite-With AutoExe logo-Includes a dedicated tool for mounting
An item that replaces the resin grip of a mass-produced oil level gauge with aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.DIY installation is possible with the attached dedicated tool. Compatible with a wide range of vehicles equipped with the SKYACTIV engine. >> More details
<Main specifications> -Aluminum-Red alumite-With AutoExe logo-Includes a dedicated tool for mounting
■ Brake fluid cap
The resin mass-produced brake fluid tank cap has been upgraded to aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.Combined with an oil filler cap and level gauge grip with the same design, it accelerates the total coordination of the engine room. >> More details
<Main specifications> -Aluminum-Fully machined-Red alumite processing-Laser engraved AutoExe logo included
The resin mass-produced brake fluid tank cap has been upgraded to aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.Combined with an oil filler cap and level gauge grip with the same design, it accelerates the total coordination of the engine room. >> More details
<Main specifications> -Aluminum-Fully machined-Red alumite processing-Laser engraved AutoExe logo included
■ Fuel cap cover
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles. >> More details
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles. >> More details
<Main specifications> ・ ABS red painted ・ With decorative cap bolt ・ With AutoExe logo ・ Double-sided tape attached ・ Fuel label / erroneous oil supply prevention reminder sticker included
■ Fuel lid cover
Designed exclusively for vehicle models to be installed in mass-produced fuel lids.The product is made of ABS with a three-dimensional chrome-plated finish, and can be easily attached with double-sided tape.Gives a sporty and mechanical impression without breaking the character line of the vehicle.In addition, by combining it with the "fuel cap cover" that is attached to the separately sold mass-produced fuel cap, it is possible to enjoy a unified coordination around the fuel filler port. >> More details
Designed exclusively for vehicle models to be installed in mass-produced fuel lids.The product is made of ABS with a three-dimensional chrome-plated finish, and can be easily attached with double-sided tape.Gives a sporty and mechanical impression without breaking the character line of the vehicle.In addition, by combining it with the "fuel cap cover" that is attached to the separately sold mass-produced fuel cap, it is possible to enjoy a unified coordination around the fuel filler port. >> More details
■ Optima Battery
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters.>> More details
<Main specifications> -Maintenance-free type made by Optima Battery
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters.>> More details
<Main specifications> -Maintenance-free type made by Optima Battery
■ Bonnet damper
The high-pressure gas damper assists light and smooth opening and closing.Since the existing lock stay is no longer required, the maintainability of the engine room is greatly improved.Bolt-on mounting is possible with a dedicated mount bracket that minimizes the load on the bonnet and frame of the mounting part.No drilling is required.>> More details
<Main specifications> ・ High-pressure filled gas damper ・ Dedicated bracket included
The high-pressure gas damper assists light and smooth opening and closing.Since the existing lock stay is no longer required, the maintainability of the engine room is greatly improved.Bolt-on mounting is possible with a dedicated mount bracket that minimizes the load on the bonnet and frame of the mounting part.No drilling is required.>> More details
<Main specifications> ・ High-pressure filled gas damper ・ Dedicated bracket included
■ Battery clamp
Playful in the engine room. Made of one-piece steel designed with the image of an AutoExe strut tower bar.The bright red color and logo plate have been faithfully reproduced.>> More details
Playful in the engine room. Made of one-piece steel designed with the image of an AutoExe strut tower bar.The bright red color and logo plate have been faithfully reproduced.>> More details
<Main specifications> -Steel red paint-With AutoExe ornament
■ Aero sports wiper blade
Uses a flat type blade for the main body.By adding a deflector with fins, the arm joint is made into an aero form.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain.
Uses a flat type blade for the main body.By adding a deflector with fins, the arm joint is made into an aero form.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain.
<Main specifications> ・ Flat type ・ Equipped with wind deflector ・ Compatible with water-repellent glass ・ Set of 2 left and right
■ Sports side visor
A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.>> More details
<Main specifications> -Smoke type acrylic resin-Set of 2 left and right with AutoExe logo
A high-performance side visor with a ventilation mechanism in addition to rain and sun protection.When the recommended side window is open, the negative pressure generated during driving is used to actively discharge the indoor air.At the same time, it also has the effect of preventing the ingress of rainwater.>> More details
<Main specifications> -Smoke type acrylic resin-Set of 2 left and right with AutoExe logo
■A pillar garnish
A carbon-like left and right set with an eye-catching fin design inspired by the flow of wind.Double-sided tape is attached to the outer sail garnish on the vehicle side, giving it a sporty accent and allowing you to enjoy total coordination with door mirror covers, etc. Includes AutoExe logo. * Compatible with AutoExe sports side visor, genuine acrylic visor, and cars without visor depending on the selection of accessory parts.
<Main specifications> ・With carbon-like fin design ・Made of weather-resistant ABS with AutoExe logo ・Adhesive with double-sided tape
A carbon-like left and right set with an eye-catching fin design inspired by the flow of wind.Double-sided tape is attached to the outer sail garnish on the vehicle side, giving it a sporty accent and allowing you to enjoy total coordination with door mirror covers, etc. Includes AutoExe logo. * Compatible with AutoExe sports side visor, genuine acrylic visor, and cars without visor depending on the selection of accessory parts.
<Main specifications> ・With carbon-like fin design ・Made of weather-resistant ABS with AutoExe logo ・Adhesive with double-sided tape
■Door mirror cover
Attach double-sided tape to the mass-produced door mirror.A matte finish carbon-like left and right set with a subtle fin design. Tighten the body by installing it together with carbon items that give a uniform feel, such as the A-pillar garnish and door handle cover & protector set.Comes with an AutoExe logo sticker that you can choose to attach or not according to your preference.
<Main specifications> ・With carbon-like fin design ・AES AutoExe logo sticker included ・Double-sided tape adhesive
Attach double-sided tape to the mass-produced door mirror.A matte finish carbon-like left and right set with a subtle fin design. Tighten the body by installing it together with carbon items that give a uniform feel, such as the A-pillar garnish and door handle cover & protector set.Comes with an AutoExe logo sticker that you can choose to attach or not according to your preference.
<Main specifications> ・With carbon-like fin design ・AES AutoExe logo sticker included ・Double-sided tape adhesive
■ Door handle cover & protector set
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details
<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 4 ・ PVC protector x 4 ・ One set
■ Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details
<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
|---|---|---|---|---|---|---|
| Oil filler cap | All models except gasoline hybrid e-SKYACTIV X | A1400-03 | ¥6,380 (¥ 5,800) | One-touch type Aluminum red alumite with AutoExe logo | D | 0.1 h |
| Oil level gauge grip | All models except gasoline hybrid e-SKYACTIV X | A1450-03 | ¥6,380 (¥ 5,800) | Aluminum red alumite with AutoExe logo Includes dedicated tool for mounting | D | 0.2 h |
| Brake fluid cap | All models except gasoline hybrid e-SKYACTIV X | A1900-03 | ¥7,480 (¥ 6,800) | Aluminum red alumite with AutoExe logo | D | 0.1 h |
| Fuel cap cover | All cars | A1600-03A | ¥5,280 (¥ 4,800) | ABS red painted AutoExe logo | D | 0.1 h |
| Fuel lid cover | Fastback | BPA1 V3 020 | ¥11,000 (¥ 10,000) | ABS chrome plated AutoExe logo double-sided tape adhesive | D | 0.3 h |
| Optima battery | All cars | A01200 | ¥62,920 (¥ 57,200) | Maintenance-free type Color: Yellow top | F | 0.3 h |
| Battery clamp | All cars | A1750 | ¥8,580 (¥ 7,800) | Steel red paint with AutoExe logo | D | 0.1 h |
| Aero sports wiper blade | All cars | MBP0260 | ¥9,680 (¥ 8,800) | Flat type wind deflector equipped Water repellent glass compatible 2 left and right set | D | 0.1 h |
| Bonnet damper | All cars | MBP2960 | ¥27,500 (¥ 25,000) | High-pressure gas-filled damper + dedicated mounting bracket Set of 2 left and right | D | 1.0 h |
| Sports side visor | Fastback sedan | BPA1 V3 700 BPA2 V3 700 | ¥27,500 (¥ 25,000) | Smoke acrylic resin 4 piece set with ventilation mechanism | D | 0.5 h |
| A pillar garnish | All cars | BPA1 V3 070 | ¥13,200 (¥ 12,000) | With carbon-like fin design, made of weather-resistant ABS, with AutoExe logo, double-sided tape adhesive | D | 0.5 h |
| Door mirror cover | All cars | BPA1 V3 650 | ¥38,500 (¥ 35,000) | Made of AES with carbon-like fin design, AutoExe logo sticker included, double-sided tape adhesive | D | 0.5 h |
| Door handle cover & protector set | All cars | BPA1 V3 110 | ¥29,260 (¥ 26,600) | Carbon-like weatherproof ABS cover x 4 PVC protector x 4 XNUMX set | D | 1.0 h |
| Wheel nut set | All cars | C9A1 V9 770 | ¥16,280 (¥ 14,800) | Includes a dedicated adapter wrench for mounting the Heptagon type with the AutoExe logo | D | 0.3 h |
Interior
In order to clearly convey the driver's intention to drive to the car, I would like to pay close attention to the texture and functionality of the cockpit interface.For the interior, we have prepared an airbag-compatible steering wheel that has a casual and sporty sensibility and a shift knob that pursues a stroke feeling during operation.I want you to enjoy the dialogue with the car.
■ Sports steering wheel
A red-colored center mark with a flat bottom shape ... An airbag-compatible product with outstanding sportiness.High-quality napper leather is used as the material, and the diameter has been reduced by 7 mm from mass production.Details such as an oval cross-section grip that is not too thick and easy to grip, dimple-processed leather that enhances holdability, and a thumb grip are created to actively enjoy driving. >> More details
<Main specifications> -Made of nappa leather-SRS airbag system / steering switch compatible-Flat bottom shape
A red-colored center mark with a flat bottom shape ... An airbag-compatible product with outstanding sportiness.High-quality napper leather is used as the material, and the diameter has been reduced by 7 mm from mass production.Details such as an oval cross-section grip that is not too thick and easy to grip, dimple-processed leather that enhances holdability, and a thumb grip are created to actively enjoy driving. >> More details
<Main specifications> -Made of nappa leather-SRS airbag system / steering switch compatible-Flat bottom shape
■ Carbon paddle shift lever
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving. >> More details
<Main specifications> ・ With AutoExe logo ・ Double-sided tape adhesive type ・ All 4 pieces configuration ・ Overall length 100mm (upper + 25mm lower + 10mm extension compared to mass production)
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving. >> More details
<Main specifications> ・ With AutoExe logo ・ Double-sided tape adhesive type ・ All 4 pieces configuration ・ Overall length 100mm (upper + 25mm lower + 10mm extension compared to mass production)
■ Shift knob (spherical shape / genuine leather)
Designed exclusively for straight AT vehicles, with a focus on the stroke feeling when the shift lock is released.The clean appearance and operability of mass-produced products without the unlock button are attractive.Push the upper end of the shift knob during operation.Shift the knob as it is.>> More details
<Main specifications> -For AT cars (straight type) -Made of genuine leather-Weight: 130g
Designed exclusively for straight AT vehicles, with a focus on the stroke feeling when the shift lock is released.The clean appearance and operability of mass-produced products without the unlock button are attractive.Push the upper end of the shift knob during operation.Shift the knob as it is.>> More details
<Main specifications> -For AT cars (straight type) -Made of genuine leather-Weight: 130g
■ Shift knob (spherical shape / genuine leather)
Made of genuine leather with a diameter of 51 mm with an emphasis on operability.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.AutoExe logo on the top.>> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
Made of genuine leather with a diameter of 51 mm with an emphasis on operability.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.AutoExe logo on the top.>> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
■ Shift knob (genuine leather)
Small diameter size with a diameter of 42 mm.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.Two types of stitches, red stitch and black stitch, can be selected.AutoExe logo on the top. >> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
Small diameter size with a diameter of 42 mm.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.Two types of stitches, red stitch and black stitch, can be selected.AutoExe logo on the top. >> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
■ Wide rear view mirror
Frameless type designed exclusively for Mazda vehicles.The blue-coated mirror has a wide field of view up to 1.8 times wider than mass production.The radius of curvature is 3000SR, reducing the parallax with the side mirrors.Contributes to comfortable driving with little viewpoint movement.The smart fitting is attractive. >> More details
<Main specifications> ・Blue chrome surface mirror ・Viewing area about 1.8 times that of mass production ・Curvature radius 3000SR AutoExe logo included
■ Sports floor mat
A high-quality floor mat set with an impressive red x black gradation that gives the interior a gorgeous color.The material is a soft wool-like fabric made from special chemical fibers in a loop weave.The driver's side is equipped with a large heel pad made of hard fiber that supports accurate pedal work during sports driving, achieving both texture and drivability. >> More details
<Main specifications> ・High-grade wool-like material ・Equipped with a large heel pad (driver's side) ・With aluminum AutoExe logo plate (front left and right) ・One set
| Product name | 適合 車 種 (Model list) | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
|---|---|---|---|---|---|---|---|
| Sports steering wheel | Red stitch | All cars ※ 1 | BPA1 V0 310 | ¥49,500 (¥ 45,000) | Nappa leather SRS airbag system / steering switch compatible flat bottom shape | D | 0.4 h |
| Carbon paddle shift lever | Vehicles equipped with steering shift switch | A1383-20 | ¥17,380 (¥ 15,800) | Carbon 4-piece construction with AutoExe logo | D | 0.1 h | |
| Shift knob (spherical shape / genuine leather) | Red stitch | AT car MT car | A1350B-03 A1341-03 | ¥19,580 (¥ 17,800) ¥9,900 (¥ 9,000) | Diameter: 51mm Overall length: 85mm Push type Screw diameter: M10 x 1.25 Diameter: 51mm Overall length: 70-88mm Adjustable weight: 190g | D D | 0.2 h 0.1 h |
| Shift knob (genuine leather) | Red stitch Black stitch | MT car MT car | A1396-03 A1396-08 | ¥9,680 (¥ 8,800) | Screw diameter: M10 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable weight: 190g | D | 0.1 h |
| Wide rear view mirror | Vehicles equipped with automatic anti-glare rearview mirror | A1520 | ¥11,000 (¥ 10,000) | Blue chrome surface mirror Approximately 1.8 times the viewing area mass production ratio Radius of curvature 3000SR | E | 0.1 h | |
| Sports floor mat | All cars | BPA1 V0 320 | ¥58,300 (¥ 53,000) | High-quality wool-like material Equipped with a large heel pad (driver's side) With AutoExe logo plate Set of 1 for 4 car | F | 0.1 h |
※ 1 The steering heater is not equipped and will not work.
Goods
Real carbon and suede-like accessories that stand out sporty.Stickers and ornaments that decorate your styling.Please enjoy the coordination with your car in every detail with your sense.
■ Carbon number frame
Autoclave molded dry carbon license plate frame with dramatically improved material and design.UV cut clear coat finish that suppresses deterioration due to ultraviolet rays.A stainless steel AutoExe logo plate is placed in the center. >> More details
<Main specifications> -Autoclave molded dry carbon-UV cut clear coating finish-Stainless steel AutoExe logo plate included
Autoclave molded dry carbon license plate frame with dramatically improved material and design.UV cut clear coat finish that suppresses deterioration due to ultraviolet rays.A stainless steel AutoExe logo plate is placed in the center. >> More details
<Main specifications> -Autoclave molded dry carbon-UV cut clear coating finish-Stainless steel AutoExe logo plate included
■carbon number bolt
High quality number bolt set using dry carbon for the plate part. Dress up your license plate smartly with the 3-piece configuration of our unique low-head stainless steel bolt/carbon washer.>> More details
<Main specifications> - Made of CFRP (logo plate part: dry carbon) - UV cut clear coating finish - Stainless steel low head bolt - AutoExe logo included - Set of 1 for 3 car
■ Leather key holder
Just fit to the new advanced key.The outer skin is made of black cordovan, which has excellent durability.Soft red cowhide leather is used on the inside to gently wrap the smart key.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
Just fit to the new advanced key.The outer skin is made of black cordovan, which has excellent durability.Soft red cowhide leather is used on the inside to gently wrap the smart key.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
<Main specifications> Cordovan (horse leather) Made of cowhide AutoExe/ASHFORD embossed logo
■ Fragment case
Old and new advanced keys/card type keys can be stored.Based on black cordovan, which has excellent durability, perforated leather with red permeation expresses a sporty feeling.With card storage case + key chain.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
Old and new advanced keys/card type keys can be stored.Based on black cordovan, which has excellent durability, perforated leather with red permeation expresses a sporty feeling.With card storage case + key chain.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
<Main specifications> Cordovan (horse leather), cow leather, AutoExe/ASHFORD embossed logo
■ Carbon key cover
Dedicated to the new advanced key.Autoclave manufacturing method used for racing car bodies, etc. Made of dry carbon.The texture that makes the most of the texture of the material is attractive. >> More details
<Main specifications> -Made of dry carbon-With AutoExe logo-2-piece configuration-Double-sided tape adhesive type
Dedicated to the new advanced key.Autoclave manufacturing method used for racing car bodies, etc. Made of dry carbon.The texture that makes the most of the texture of the material is attractive. >> More details
<Main specifications> -Made of dry carbon-With AutoExe logo-2-piece configuration-Double-sided tape adhesive type
■ Car verification case
High-quality black suede-like that smartly stores in-vehicle documents such as vehicle verification, instruction manuals, and maintenance notes.The red stitching, which is unified to the liner inside the case, also enhances the sports mind. >> More details
<Main specifications> -Black suede tone-Red stitch-AutoExe embossed logo-Size: 245 x 180 x 65 mm
High-quality black suede-like that smartly stores in-vehicle documents such as vehicle verification, instruction manuals, and maintenance notes.The red stitching, which is unified to the liner inside the case, also enhances the sports mind. >> More details
<Main specifications> -Black suede tone-Red stitch-AutoExe embossed logo-Size: 245 x 180 x 65 mm
■ Ornaments / stickers
You can enjoy it with your own taste.It is also good to dress up with the demo car as a model.A lineup of high-quality AutoExe logo decorations that make you feel the commitment to driving. >> More details
You can enjoy it with your own taste.It is also good to dress up with the demo car as a model.A lineup of high-quality AutoExe logo decorations that make you feel the commitment to driving. >> More details
| Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time | |
|---|---|---|---|---|---|---|---|
| Carbon number frame ※ 1 | For front license plate mounting | A1800-20 | ¥18,480 (¥ 16,800) | Made of CFRP (dry carbon) UV cut clear coating finish Comes with stainless steel AutoExe logo plate | D | 0.1 h | |
| carbon number bolt | General-purpose products (excluding character light type license plates) | C9A1 V9 760 | ¥9,350 (¥ 8,500) | Made of CFRP (logo plate part: dry carbon) UV cut clear coating finish Stainless steel low head bolts with AutoExe logo Set of 1 for 3 car | D | 0.1 h | |
| leather key holder | Vehicles equipped with the new advanced key ※ 2 | MAA0005 | ¥19,800 (¥ 18,000) | Made of cordovan (horse leather) and cowhide with AutoExe/ASHFORD embossed logo | F | - | |
| fragment case | General-purpose products | MAA0006 | ¥14,850 (¥ 13,500) | Made of cordovan (horse leather) and cowhide with AutoExe/ASHFORD embossed logo Size: 150mm x 72mm x thickness 5-15mm | F | - | |
| Carbon key cover | Vehicles equipped with the new advanced key ※ 2 | A2650-20 | ¥10,780 (¥ 9,800) | Made of CFRP (dry carbon) with AutoExe logo, 2-piece construction, double-sided tape adhesive type | D | - | |
| Car verification case | General-purpose products | A2810-33A | ¥7,480 (¥ 6,800) | Black suede-like red stitch with AutoExe logo Size: 245 x 180 x 65 mm | D | - | |
| Bright ornament | General-purpose products | A12500 | ¥5,280 (¥ 4,800) | Chrome-plated ABS resin double-sided tape adhesive type Size 155mm x 20mm | D | - | |
| ornament | General-purpose products | A12000 | ¥1,980 (¥ 1,800) | Aluminum double-sided tape adhesive type Size 120mm x 24mm | B | - | |
| Wind logo sticker | General-purpose products | black | A10000-08 | sold out. | One-touch transfer type Size 235mm x 48mm | B | - |
| Message logo sticker | General-purpose products | A11900-03 | ¥880 (¥ 800) | One-touch transfer type Size 158mm x 28mm | B | - | |
| Logo sticker (L) | General-purpose products | silver Red white | A11200-02 A11200-03 A11200-04 | ¥1,320 (¥ 1,200) | Character type without characters Size 550mm x 56mm | B | - |
| Logo sticker (S) | General-purpose products | silver Red white | A11300-02 A11300-03 A11300-04 | ¥660 (¥ 600) | Character type without characters Size 270mm x 28mm | B | - |
※ 1 This product may appear on a part of the in-vehicle monitor screen such as a car equipped with a front camera.
※ 2 The leather key holder (MAA0005) and carbon key cover (A2650-20) cannot be installed at the same time.
MAZDA3 Parts impression
We are posting the raw voice of the customer who is actually wearing it.
Please refer to the car personalization project.
It is very easy to check the rear.
2024-04-04
- Impressions by vehicle type
- MAZDA3 / Axela
- Impressions by parts
- Interior
Wiping it off when washing the car is now much easier.
2024-04-04
- Impressions by vehicle type
- MAZDA3 / Axela
- Impressions by parts
- ス タ イ リ ン グ
It looks cool and I'm very satisfied.
2024-03-05
- Impressions by vehicle type
- MAZDA3 / Axela
- Impressions by parts
- ス タ イ リ ン グ
Both practicality and appearance.
2024-03-05
- Impressions by vehicle type
- MAZDA3 / Axela
- Impressions by parts
- ー ー テ ィ リ テ テ ー ー
Increased low speed torque.
2024-03-05
- Impressions by vehicle type
- MAZDA3 / Axela
- Impressions by parts
- Intake and exhaust system
Accented with red color.
2024-03-05
- Impressions by vehicle type
- MAZDA3 / Axela
- Impressions by parts
- ー ー テ ィ リ テ テ ー ー
Gives a completely sporty impression.
2024-03-05
- Impressions by vehicle type
- MAZDA3 / Axela
- Impressions by parts
- ス タ イ リ ン グ
The color is good and is quite noticeable.
2024-01-30
- Impressions by vehicle type
- MAZDA3 / Axela
- Impressions by parts
- ー ー テ ィ リ テ テ ー ー
Solid feel.
2023-12-28
- Impressions by vehicle type
- MAZDA3 / Axela
- Impressions by parts
- Engine & drivetrain
