New release for CX-60.
Ventilate the inside of the car using the running wind.With ventilation mechanism.
A sports side visor with a ventilation mechanism not found in general side visors.Negative pressure is generated using the running wind, and the air inside the vehicle is actively discharged.It exerts its function in proportion to the speed from low speed.Made of high quality injection molded acrylic resin.The sporty aero form developed based on simulation analysis has a high dress-up effect.It is a practical item that we would like to recommend not only to sports-oriented users but also to a wide range of people such as families and pet lovers.
<Sports side visor conceptual diagram>
Side visor not installed
(The window is slightly lowered)
The air inside the car is slightly exhausted.However, most of them are returned to the inside of the car again. (Although the conventional visor can prevent rainwater from entering, the exhaust → reflux mechanism is the same as when it is not installed.)
Side visor installed
(The window is lowered to the proper position)
With its characteristic aero form, it catches the running wind flowing on the side and generates negative pressure.The negative pressure action forces the air inside the vehicle to be discharged from the duct / window opening.
Rubber blade that suppresses reflux into the room
The discharged air does not flow smoothly to the rear, but swirls and returns to the room again.The rubber blade attached to the bottom of the visor shuts it out.
Effective usage
It is best to set the upper edge of the front window slightly above the rubber blade (mole).The rear window is fully closed.The air conditioning switch selects the introduction of outside air.
Smoke type made of acrylic resin
Made of injection-molded smoke-type acrylic resin of the same quality as the genuine product. With AutoExe logo.
<Customers wearing carbon pillar garnish>
Part of the carbon pillar garnish is cut and installed at the same time.For details, see the installation manual.
Installation manual download page
for CX-60
For MAZDA3 sedan
For MX-30 (DREJ3P)
For CX-8 (KG)
<Product compatibility table>
■ Sports Side Visor Smoke type with ventilation mechanism Acrylic resin AutoExe logo included ※ 1
Car name | 適合 車 種 | part number | Tax-included price (Price without tax) | Number of constituents | Codes | Reference work Time |
---|---|---|---|---|---|---|
RX-8 | SE3P | MSE0400 | ¥22,000 (¥ 20,000) | 2 | D | 0.4 h |
MAZDA2 / Demio | All DJ cars | DJA1 V3 700 | ¥18,700 (¥ 17,000) | 4 | D | 0.5 h |
Demio | All DE series cars | MDE0400 | ¥26,400 (¥ 24,000) | 4 | D | 0.5 h |
MAZDA3 | BP fastback BP sedan | BPA1 V3 700 BPA2 V3 700 | ¥27,500 (¥ 25,000) | 4 | D | 0.5 h |
Axela | All BM / BY series cars | MBM0400 | sold out. | 4 | D | 0.5 h |
MAZDA6 / Atenza | GJ wagon ※ 2 | MGJ0410 | ¥36,300 (¥ 33,000) | 4 | D | 0.5 h |
CX-3 | All DK series cars | DKA1 V3 700 | ¥22,000 (¥ 20,000) | 4 | D | 0.5 h |
CX-30 | All DM series cars | DMA1 V3 700 | ¥29,700 (¥ 27,000) | 4 | D | 0.5 h |
MX-30 | All DR series cars | DRA1 V3 700 | ¥22,000 (¥ 20,000) | 2 | D | 0.3 h |
CX-5 | All KF series cars | KFA1 V3 700 | ¥26,400 (¥ 24,000) | 4 | D | 0.5 h |
CX-60 | All KH series cars | KHA1 V3 700 | ¥33,000 (¥ 30,000) | 4 | D | 0.5 h |
CX-8 | All KG series cars | MKG0400 | ¥26,400 (¥ 24,000) | 4 | D | 0.5 h |
Biante | All CC series cars | MCC0400 | ¥26,400 (¥ 24,000) | 4 | D | 0.5 h |
※ 1 By installing this product, the wind noise during driving may increase.
※ 2 Comes with a bright plating molding.