[About new roadster product compatibility]
Product compatibility with 2023 product improvement vehicles (NDERE 100001~ ND5RE 100001~) has been reflected in each list.
The latest information can be found below.
NDERE 100001~
ND5RE 100001~
(2024.4.1)
Roadster Updates
ND-07
For the never-ending love of roadster.
Towards a nostalgic run. street best tuneND-07New appearance.
Even after 8 years since its debut, the ND Roadster is still a rare model that has gained support across generations. The improved model released in 24 has significantly improved the sophistication of its driving performance and the safety and comfort demanded by the times, and has received high praise from experts as the ``latest and best roadster.''
AutoExe, which has provided numerous tuning kits for successive models, has joined in with the maturity of ND and has released the definitive version of the street best tune, ``ND-07.'' First of all, the styling respects the beauty of the original, with a dynamic front under spoiler, a trunk spoiler with real carbon accents, a rear side cowl inspired by the flow of wind, and a sports muffler with two left and right exhausts that produce a sensual sound. At the same time, it emphasizes the neatness and strength that are unique to AutoExe.
Our focus on the running aspect is to achieve a high level of flexibility and direct feel. For example, the street sports suspension kit (KIJIMA-SPEC) supervised by Takao Kijima, who was involved in the design of numerous sports cars as an authority on suspension at Mazda Motor Corporation, does not simply increase roll rigidity, but also improves the The damper is designed with emphasis on the rise of damping force from the very low speed range so that it responds naturally without any discomfort. Thanks to our unique sensitivity tuning, which we have honed over many years, we have expanded the potential of mass production and achieved a nostalgic street best performance without being too hard.
Tune Your Life = Our complete tune "ND-07" that makes the days you spend with your Roadster even more intense. We would like adults who have a good taste in running and the joy of life to enjoy it to the fullest.
Styling kit
● The tires and wheels in the photo are examples of installation.
Front under spoiler
Accented with an air duct motif. The dynamic form, which incorporates a high nose and forward-swept wing tips, adds graceful strength. Painted piano black.
trunk spoiler
The combination of real carbon and piano black quietly asserts a sports mindset. A simple appearance that expresses the flow of mass-produced trunks.
Rear side cowl
The duct motif boldly depicts the flow of air. Gives a sporty accent. (Snowflake White Mica/Soul Red Crystal M/Machine Gray Premium M pre-painted products are available)
Door mirror cover
The carbon-like matte finish with a subtle fin design makes the body look fearless. Includes AutoExe logo sticker. Double-sided tape attached.
Sports muffler (dual)
Two left and right output specifications that can be installed at the same time as the muffler garnish. The straight structure silencer produces a gentle and unsatisfactory sound.
Muffler garnish
A dedicated garnish that can be installed at the same time as the sports muffler. A mass-produced bumper is cut and installed to create a rear view with a sense of unity.
carbon seat back bar bezel ※under development
Made of dry carbon used in racing cars, etc. Along with the prominent AutoExe three-dimensional logo, it appeals to following vehicles with its authentic appearance.
Fuel lid cover
A mechanical one-point item that gives off a metallic feel.Double-sided tape is attached to the mass-produced fuel lid cover.
Door handle cover & protector set
A matte carbon finish that protects the paint on the door handle and gives the styling a sporty look.
For Roadster RF (NDERE/NDERC)/Roadster (ND5RE/ND5RC)
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
---|---|---|---|---|---|---|
Front under spoiler | All cars | NDA1 V4 900 | ¥90,200 (¥ 82,000) | Piano black painted ABS made with drilling required | D | 1.0 h |
trunk spoiler | All cars※ 1 | NDA1 V4 920 | ¥96,800 (¥ 88,000) | UV cut clear coated carbon (back) + piano black painted CFRP + FRP hole drilling required | F | 1.0 h |
Rear side cowl | All cars | NDA1 V3 060 2M NDA1 V3 060 PR NDA1 V3 060 64 NDA1 V3 060BB | ¥68,200 (¥ 62,000) ¥68,200 (¥ 62,000) ¥68,200 (¥ 62,000) ¥57,200 (¥ 52,000) | Machine Gray Premium Metallic Painted※ 2 Made of ABS, left and right set, double-sided tape adhesive *Currently, we are receiving a large number of orders and it may take approximately 2 to 3 months for delivery. (2024.3.14) Soul Red Crystal Metallic Painted※ 2 ABS left and right set double-sided tape adhesive Snowflake white pearl mica painted※ 2 Made of ABS, left and right set, double-sided tape adhesive Scheduled to start shipping in late July Painting required ABS left and right set double-sided tape adhesive | D | 0.5 h |
Door mirror cover | All cars | NDA1 V3 650 | ¥38,500 (¥ 35,000) | Made of AES with carbon-like fin design, AutoExe logo sticker included, double-sided tape adhesive | D | 0.5 h |
Sports muffler (dual) | NDERE all cars/NDERC-300001~/ND5RE MT cars※ 3 | NDA1 V5 800 | ¥162,800 (¥ 148,000) | Stainless steel main pipe diameter φ50.0 left and right 2 tail diameter 76mm x 2 Scheduled to start shipping in mid-March | F | 0.8 h |
Muffler garnish | NDERE all cars/NDERC-300001~/ND5RE MT cars※ 3 | NDA1 V3 910 | ¥46,200 (¥ 42,000) | For vehicles equipped with sports muffler (dual). Cannot be installed separately. Made of AES. Black matte finish (painting not required). Rear bumper removal required. | D | 0.5 h |
carbon seat back bar bezel | Under development | Made of CFRP (dry carbon) with AutoExe logo, double-sided tape adhesive Set of 2 left and right | ||||
Fuel lid cover | All cars | MND1610 | ¥11,000 (¥ 10,000) | ABS chrome plated AutoExe logo double-sided tape adhesive | D | 0.3 h |
Door handle cover & protector set | All cars | NDA1 V3 110 | ¥14,630 (¥ 13,300) | Carbon-like weatherproof ABS cover x 2 PVC protector x 2 XNUMX set | D | 0.5 h |
※ 1 The genuine rear mascot (N243-51-730) must be transplanted or replaced separately.
※ 2 The paint color may not exactly match the body color.
※ 3 Cannot be installed separately. Sports muffler dual (NDA1 V5 800) and muffler garnish (NDA1 V3 910) must be installed at the same time.
ND-06S
Winding, sometimes the circuit.
High limit pure sports, ND-06S.
The ND-06S is a hard tuned version released by AutoExe, which has long advocated "sophisticated street best tune", by breaking the regulations. It is a machine for ND users, especially hard-liners who demand high-limit performance.
The index of development is the realization of a solid feeling such as agility, acceleration / deceleration, and less play.In order to take full advantage of the lightweight front and rear 50:50 weight distribution front midship FR, the comfort has been reduced to the limit that can be tolerated, and the margin has been converted to athletic performance.
Specifically, first of all, the entire body, which is the core of the car, is thoroughly solidified to ensure rigidity.On top of that, the center of gravity has been lowered to maximize the grip of the tire when moving loads.The roll rigidity has been strengthened by 200% or more, and it has extremely agile characteristics that respond instantly to steering.In addition, the brake has raised the proper rotor temperature to 2 ° C, which is about twice that of the general one, in order to withstand high loads.The intake and exhaust system that actively takes in air and exhausts it efficiently, the operation system such as the seat, and the styling kit that expresses a wide and solid feeling, etc., are thoroughly tuned based on the idea of the car model.
Even if I'm on a peaceful street everyday, my heart never forgets the stage of running.Train your roadster with the ND-06S and take it to the winding road and sometimes to the circuit.
Styling kit
Front under spoiler
The air ducts on both sides are installed in front of the front tires and aim to send air toward the strake that rectifies the air inside the tire house.The wedge shape at the tip of the wing adds graceful strength.Piano black painted.An additional type to be attached to the mass-produced front bumper.
Rear under panel
Diffuser shape that is conscious of rectification.Along with the rear wing, the rear view stands out like a pure sports car.Black satin finish that does not require painting.Additional type to be attached to mass-produced rear bumpers.
Rear wing
A wing-type spoiler that gives the rear view a sports car-like presence.The high mount stop lamp is installed by relocating a mass-produced product.AutoExe ornaments are placed on the left and right wing tips.Includes a lid cover that naturally arranges the mass-produced high-mount stop lamp mounting part.
LED rear combination light
The combination of a refreshing horizontal high-intensity LED red light bar, a sequential turn signal that gives an impact to the following vehicle and enhances visibility, and a light smoke lens impresses a vivid and neat pure sport.
The state when it is litplease use this form..
For Roadster RF (NDERE/NDERC)/Roadster (ND5RE/ND5RC)
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time |
---|---|---|---|---|---|---|
Front under spoiler | All cars | MND2160-08 | ¥90,200 (¥ 82,000) | Piano black painted FRP made drilling required | D | 1.0 h |
Rear under panel | All cars | MND2410 | ¥46,200 (¥ 42,000) | Black satin (no painting required) Made by AES Drilling required | D | 0.5 h |
Rear wing | NDERE/NDERC ND5RE/ND5RC | MND2610 MND2600 | ¥81,400 (¥ 74,000) | AutoExe ornament / lid cover included FRP made Paint required Drilling required | D | 1.0 h |
LED rear combination light | NDERC / ND5RC | MND2250 | ¥99,000 (¥ 90,000) | Light smoked lens LED red light bar LED sequential turn signal (flashing type selectable) Made by Valenti * Safety standard compliant product (E9-23659) | F | 0.4 h |
<Other Styling Kit>
Functional parts
Suspension
"A New Driving Sensation" Suspension is at the core of sporty driving.Our aim is to handle at will beyond the framework of mass-produced vehicles.For drivers who want to enjoy driving positively, it is not just hard and soft, but it provides a street best ride with refined dynamic sensitivity performance such as initial response at the time of steering and transient characteristics of roll. >> Read more
■ Lowdown spring
The styling is sporty and tightened in combination with a mass-produced damper, and the handling is improved by lowering the center of gravity.By suppressing the vehicle height to -20 mm and the spring constant to about 120%, the suspension stroke is secured and comfort is also taken into consideration. >> More details
<Main specifications> ・ Vehicle height: -20mm ・ Spring constant isplease use this form.Please refer to
■ Sports damper
Although it has the same shape as the mass-produced product, the internal piston adopts a "very low speed valve" that generates precise damping force from the moment it starts moving.It accurately controls changes in the vehicle's posture and achieves a sporty, flat and high-quality ride.It is recommended to use with genuine springs (can be used with lowdown springs).>> More details
<Main specifications> ・ Fixed gas damping force
■ Street Sports Suspension Kit (KIJIMA-SPEC)
A height-adjustable kit that aims for normal evolution to enjoy driving while maintaining the balance of mass production specifications.Based on the dynamic Kansei engineering theory of Mr. Takao Kijima, who was the development chief of sports cars as an authority on suspension during his tenure at Mazda Motor Corporation, the vehicle height, spring constant, and damper damping force are set.It is tuned to exquisite handling that exceeds the restrictions of mass-produced cars.Uses a high-precision twin tube damper and a dedicated trapezoidal spring with excellent lateral rigidity. >> More details
<Main specifications> ・ Twin tube full length adjustable vehicle height ・ Fixed damping force type ・ Recommended vehicle height -15mm
■ Club Sports Suspension Kit
A model exclusively for FR sports cars that has reduced comfort to the limit that we can tolerate and converted the margin into athletic performance.The standard vehicle height is -30mm.In order to maintain accurate operability even in winding and hard circuit driving, a monotube type damper with excellent heat conversion ability at high load and a series-wound spring with a spring constant that rises linearly are adopted.Creates a solid driving sensation with a high sense of change regardless of the speed range. >> More details
<Main specifications> ・ Monotube full length adjustment type ・ Damping force 24 steps adjustment type ・ Recommended vehicle height -30mm ・ Spring constant: Fr: 68.6 Rr: 39.2N / mm
■ Adjustable stabilizer link
When the vehicle height is down, the angle of the lower arm changes.As a result, the arm angle between the stabilizer and the link becomes an acute angle, which tends to spoil the original stabilizer effect.This product corrects the arm angle when the vehicle height is lowered by adjusting the link length.Optimize the stabilizer function.>> More details
<Main specifications> -Full length adjustable XNUMX-piece set-For front-Axial mount type
■ Sports stabilizer
A stabilizer that connects the left and right suspension arms with a pipe and suppresses roll by the spring effect.From mass production, the spring constant has been strengthened by 140% at the front and 275% at the rear.Stabilizes the posture when cornering while keeping controllability.Since the spring effect hardly occurs when going straight, the effect on the ride quality is minimal. >> More details
<Main specifications> ・ Front: Solid φ23.0 with dedicated rubber mount Spring constant 140% ・ Rear: Hollow φ14.0 Dedicated mount rubber / bracket included Spring constant 275%
■ Sports tie rod end
The tie rod that connects the steering and the left and right knuckles of the front wheels is designed based on the genuine vehicle height.Therefore, the angle of the tie rod changes when the vehicle height is lowered, which induces a toe change during cornering.This product is an item that restores the original steering characteristics by correcting the tie rod angle during lowdown. >> More details
<Main specifications> -Carbon steel (S45C / forged) -Set of 2 left and right
■ Upper mount bush set
Mass-produced shape product with 127% higher rubber hardness.A set of 8 for one unit to be attached to the top mount of the damper.It suppresses the bending of the rubber from the moment the damper starts to move, and supports the quick rise of damping force.It is recommended to replace the suspension at the same time. >> More details
■ Suspension bush set (upper)
Mass-produced shape product with rubber hardness increased by 125 to 146%.A total of 8 locations, including front and rear upper arms and lateral / leading links, are set.While ensuring practicality, it suppresses the bending of rubber in moving parts and supports accurate handling.It is also possible to purchase a single item for each part.>> More details
■ Suspension bush set (lower)
Mass-produced shape product with rubber hardness increased by 109-140%.Eight front lower arms, rear trailing / toe control / lateral link, and 8 rear axles are set.While ensuring practicality, it suppresses the bending of rubber in moving parts and supports accurate handling.It is also possible to purchase a single item for each part. >> More details
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
---|---|---|---|---|---|---|---|
Low down spring | NDERE/NDERC ND5RE/ND5RC (excluding NR-A) | MND7100 MND7000A | ¥41,800 (¥ 38,000) ¥40,700 (¥ 37,000) | Vehicle height-20mm Spring constant: Fr: 30.5 Rr: 16.9N / mm Vehicle height-20mm Spring constant: Fr: 26.2 Rr: 14.1N / mm | D | 2.6 h | |
Sports damper | NDERE/NDERC ND5RE/ND5RC | MND7710 MND7700 | ¥79,200 (¥ 72,000) | Compatible with fixed damping force mass production springs / AutoExe springs | D | 2.5 h | |
Street Sports Suspension Kit (KIJIMA-SPEC) | NDERE/NDERC ND5RE/ND5RC | MND7860 MND7850 | ¥195,800 (¥ 178,000) | Twin tube full length adjustment type damping force fixed type Recommended vehicle height -15mm Spring constant: Fr: 37.2 Rr: 22.5N / mm Twin tube full length adjustment type damping force fixed type Recommended vehicle height -15mm Spring constant: Fr: 24.5 Rr: 12.7N / mm | D | 2.7 h | |
Club Sports Suspension Kit | All cars | MND7970 | ¥250,800 (¥ 228,000) | Monotube full length adjustment type damping force 24 steps adjustment type Recommended vehicle height-30mm Spring constant: Fr: 68.6 Rr: 39.2N / mm | F | 2.7h | |
Adjustable stabilizer link | front | All cars | MSE7605 | ¥22,000 (¥ 20,000) | Full length adjustable left and right set of 2 | D | 0.5 h |
Sports stabilizer | front rear | NDERC / ND5RC All cars ※ 1 | MND7600 MND7650 | ¥30,800 (¥ 28,000) ¥29,700 (¥ 27,000) | Solid φ23.0 Spring constant (compared to mass-produced vehicles) 140% Hollow φ14.0 Spring constant (compared to mass-produced vehicles) 275% | D | 2.5 h 0.5 h |
Sports tie rod end | All cars | MND7A00 | ¥22,000 (¥ 20,000) | Made of carbon steel (S45C forged) Set of 2 left and right | D | 1.0 h | |
Upper mount bush set | All cars | MND7X20 | ¥13,200 (¥ 12,000) | Rubber hardness 127% (compared to mass-produced vehicles) A set of 8 in total | F | - | |
Suspension bush set | upper Lower | All cars All cars | MND7X10 MND7X00 | ¥25,300 (¥ 23,000) ¥64,900 (¥ 59,000) | Rubber hardness 125-146% (compared to mass-produced vehicles) A set of 8 in total Rubber hardness 109-140% (compared to mass-produced vehicles) A set of 22 in total | F | - |
※ 1 リアスタビライザー非装着車に装着する場合、純正ナット(9YB04-0813)×4、ナット(9YB04-1036)×4とスタビライザーリンク(R)(N243-28-170)×1、スタビライザーリンク(L)(N243-28-190)×1が別途必要。
Bodysuit
In order to enhance the sense of unity between the driver and the car, tuning to train the body is the basis.By suppressing slight distortion of each part of the body due to input from the road surface such as during cornering, the movement of the suspension initial operating area absorbed by the distortion is drawn out, and handling with a direct feeling without delay of reaction from the moment when the steering is started Contribute to. >> Read more
■ Strut tower bar
Adopted a one-piece structure in which a steel oval shaft, which is advantageous in terms of rigidity, is integrally molded by welding.The left and right struts are connected via the bulkhead to improve body rigidity.It is effective when installed separately, but it is best to use it in combination with a floor crossbar that is set separately. >> More details
<Main specifications> -Steel oval shaft 4-piece structure XNUMX-point type
■ Floor crossbar
With a simple structure that allows one bar to crawl in the left-right direction of the floor, it demonstrates the tower bar effect.Since it also serves as a suspension mounting point with high strength, the burden on the body is extremely small.There is almost no impact on the utility space.It is effective when used alone, but it is recommended to install it together with the strut tower bar. >> More details
<Main specifications> -Steel oval shaft 2-piece structure 4-point type
■ Tower brace set
The aim is to obtain a thin and rigid feeling in the closed body.While following the basic layout of the existing strut tower bar / floor crossbar, the specifications are such that the rigidity of the brace body is increased as much as possible.Since the degree of rigidity increase is high, it is best to set only the front and rear sets, and to install it at the same time as the member brace set that solidifies the underfloor on the surface. >> More details
<Main specifications> ・ Steel oval shaft front and rear 4-piece configuration ・ Weight: 8.0kg
■ Member brace set
A structure developed from the crossbar equipped for mass production.By mounting a frame with a three-dimensional truss structure on the entire underfloor, the chassis rigidity of the highest level as a bolt-on part is obtained.In combination with the tower bar / floor cross bar that reinforces the front and back of the upper part of the body, a tough monocoque body with two upper and lower stages is completed. >> More details
<Main specifications> -Steel oval shaft front and rear 3-piece structure-Weight: 7.5 kg
■ Motion control beam
Reinforces the front and rear ends of the body to increase torsional rigidity.By suppressing the vibration of the body due to high rigidity with a friction type damper with ultra-high damping, it creates a street best ride with strength and suppleness.A set of two front and back.With a dedicated mounting bracket.>> More details
<Main specifications> -Friction type damper + steel shaft Front and rear set with mounting bracket
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
---|---|---|---|---|---|---|---|
Strut tower bar | front | All cars ※ 1 | MND4000 | ¥37,400 (¥ 34,000) | Steel 1-piece structure 4-point type | D | 0.5 h |
Floor crossbar | rear | All cars | MND4500A | ¥26,400 (¥ 24,000) | Steel 2-piece structure 4-point type | D | 1.0 h |
Tower brace set | All cars * 1 * 2 | MND4800 | ¥79,200 (¥ 72,000) | Steel 4-piece structure 10-point front and rear set | D | 2.5 h | |
Member brace set | All cars ※ 3 | MND4700 | ¥74,800 (¥ 68,000) | Steel 3-piece structure 10-point front and rear set | D | 1.0 h | |
Motion control beam | All cars | MND4900 | ¥99,000 (¥ 90,000) | Friction damper + steel shaft Front and rear set with mounting bracket | E | 1.5 h |
※ 1 When installing on a car without a genuine strut tower bar, a genuine air cowl panel (N244-56-35X) x 1 is required separately.
※ 2 NDERC cannot be equipped with the tower brace set (MND4800) and oil level gauge grip (A1450-03) at the same time.
※ 3 When installing on a car without a tunnel brace bar, genuine bolts (9YA42-0809A) x 2 are required separately.
Intake & Exhaust
In the intake / exhaust tune, which is directly linked to the pleasure of driving, the point is not to improve the peak power, but to react to instantly convey the driver's intention to the car.The accelerator response has been refined based on the air filter and muffler with moderately reduced resistance.The restrained sports sound also deepens communication between the driver and the car. >> Read more
■ Air filter replacement
Utilizing the air cleaner case of mass-produced cars, replacing only the filter part effectively improves the accelerator response.The dry filter, which has a good balance between ventilation performance and dust collection effect, is a disposable type that has little effect on the air flow sensor and is easy to maintain. >> More details
<Main specifications> ・ Dry type ・ Disposable (disposable) type
■ Sports induction box
Use the air cleaner box of a mass-produced car to replace the case on the suction side.Directly guides fresh air to the air filter to improve intake efficiency.The sound also changes to sports-like.Further increase efficiency by combining with the optional K & N air filter. >> More details
<Main specifications> -Funnel type FRP frame + aluminum heat shield
■ Ram air intake system
High efficiency while following the basic layout of mass production.The intake duct equipped with a large air guide inside the front grill directly captures the fresh running wind that is not affected by the radiant heat of the radiator and exerts a ram pressure effect.By combining a carbon cleaner box with a straightened suction path and a large capacity as much as possible and a conical filter with high suction efficiency, the filling efficiency is improved in response to the increased suction amount. >> More details
<Main specifications>・Special wet filter + carbon duct
■ Intake suction kit
Specifications that secure the maximum effective flow path area of intake air and reduce intake resistance.The material used is multi-layer polystar silicon, which has a high effect of suppressing deformation due to negative suction pressure.As a result, the accelerator response has been improved.The crimson coloring adds an accent to the engine room. >> More details
<Main specifications> ・ Made of 4-layer polystar silicon
■ Premier tail muffler
A series with a sophisticated and profound feeling. The 110x95mm oval-shaped tail end has a very mature feel.With a large-capacity straight structure silencer that has been carefully tuned for a narrow main pipe diameter and internal structure, it achieves both improved accelerator response from the practical range and a gentle sports sound that suppresses the noise inside the room. >> More details
<Main specifications> ・ Stainless steel ・ Straight structure silencer ・ Main diameter: Φ60.5 ・ Tail diameter: Φ110 × 95
[Sound library for audition] * You can compare it with the mass-produced muffler recorded under the same conditions.It may not be accurate due to the characteristics of the playback environment, but please watch it as a reference for changes in sound quality and volume.
■ Sports muffler (single)
Adopted a 90mm diameter slash tail with a sub-silencer, which is suitable for the name of sports.In terms of functionality, improving exhaust efficiency has been given top priority, and the multi-stage expansion type of mass-produced vehicles has been changed to a straight structure to reduce back pressure loss.Examining the pipe diameter and length, etc., to obtain an agile response.For muffling, a method is adopted in which the propagation distance of the sound wave is created and the phase is shifted so that the high and low frequencies of the sound interfere with each other.It creates a sport sound without any miscellaneous taste. >>Click for details
[Sound library for audition] * You can compare it with the mass-produced muffler recorded under the same conditions.It may not be accurate due to the characteristics of the playback environment, but please watch it as a reference for changes in sound quality and volume.
■Sports muffler (dual)
Two left and right output specifications with a slash tail with a diameter of 76 mm. Attach at the same time as the muffler garnish. In terms of functionality, we prioritized improving exhaust efficiency, changing from the multi-stage expansion type of mass-produced vehicles to a straight structure to reduce back pressure loss. We carefully examine the pipe diameter and length to achieve quick response. For noise reduction, we use a method that creates a propagation distance for sound waves and shifts the phase to interfere with the high and low frequencies of the sound. It creates a sports sound without any frills. >> More details
[Sound library for audition] * You can compare it with the mass-produced muffler recorded under the same conditions.It may not be accurate due to the characteristics of the playback environment, but please watch it as a reference for changes in sound quality and volume.
■Muffler garnish (for sports muffler dual installation)
A dedicated garnish that can be installed at the same time as the sports muffler. A mass-produced bumper is cut and installed to create a rear view with a sense of unity. Made by AES, black matte finish (no painting required), cannot be installed separately.
<Main specifications> - For vehicles equipped with sports muffler (dual) - Cannot be installed separately - Made by AES - Black matte finish (painting not required) - Rear bumper removal required
■ Sports muffler (center dual)
"Sports muffler" has evolved the muffling method from "sound absorption to interference" and contributes to the improvement of engine output in the entire range in terms of performance.Since no sound absorbing material is used, theoretically there is no increase in volume over time.You can enjoy a clear exhaust note with restraint for a long time.In terms of visuals, the combination of the new design dual tail with a perfect circle of φ90 x 2 and the rear under panel completes a compact rear view that is typical of lightweight sports.Cannot be installed separately.Must be installed at the same time as the rear under panel. >> More details
[Sound library for audition] * You can compare it with the mass-produced muffler recorded under the same conditions.It may not be accurate due to the characteristics of the playback environment, but please watch it as a reference for changes in sound quality and volume.
■Rear under panel (sports muffler Center dualfor mounting)
At the same time as covering the notch at the outlet of the mass-produced muffler, by combining it with a sports muffler, it realizes a tight form that is typical of lightweight sports.Piano black painted product.Cannot be installed separately.Must be installed at the same time as the sports muffler.
<Main specifications> -Piano black painted-ABS resin-Cannot be installed separately It is necessary to install it with a sports muffler (center dual) at the same time.
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
---|---|---|---|---|---|---|---|
Air filter replacement | All cars | MND9A00 | ¥10,450 (¥ 9,500) | Dry-type disposable (disposable) type | D | 0.3 h | |
Sports induction box | No filter With filter | All cars All cars | MND957 MND957X | ¥38,500 (¥ 35,000) ¥49,500 (¥ 45,000) | Funnel type FRP frame + aluminum heat shield Funnel type FRP frame + aluminum heat shield K & N air filter included | D | 1.0 h |
Ram air intake system | NDERE/NDERC ND5RE/ND5RC | NDA2 V5 900 NDA1 V5 900 | ¥134,200 (¥ 122,000) | FRP air duct + carbon box Dedicated air filter included | F | 1.5 h | |
Intake suction kit | NDERE/NDERC ND5RE/ND5RC | MND9620 MND9610 | ¥19,800 (¥ 18,000) | Silicone hose | D | 0.3 h | |
Premier tail muffler | NDERE/NDERC/ND5RE MT car/ND5RC ※ 1 | MND8Y00A | ¥93,500 (¥ 85,000) | Stainless steel main pipe diameter φ60.5 Tail diameter 110 × 95mm | D | 0.8 h | |
Sports muffler single | NDERC-300001~/ND5RC 6MT without I-ELOOP | MND8Y70 | ¥126,500 (¥ 115,000) | Straight structure made of stainless steel Main pipe diameter φ50.0 Tail diameter 90mm (slash type / built-in sub-silencer) | F | 0.8 h | |
sports muffler dual | NDERE all cars/NDERC-300001~/ND5RE MT cars ※ 2 | NDA1 V5 800 | ¥162,800 (¥ 148,000) | Stainless steel main pipe diameter φ50.5 left and right 2 tail diameter 76mm x 2 Scheduled to start shipping in June | F | 0.8 h | |
Muffler garnish (for sports muffler installation) | NDERE all cars/NDERC-300001~/ND5RE MT cars※ 2 | NDA1 V3 910 | ¥46,200 (¥ 42,000) | For vehicles equipped with sports muffler (dual). Cannot be installed separately. Made of AES. Black matte finish (painting not required). Rear bumper removal required. | D | 0.5 h | |
Sports muffler center dual | NDERC ※ 3 ND5RC * 1 * 3 | MND8Y60 MND8Y50 | ¥140,800 (¥ 128,000) | Stainless steel main pipe diameter φ54.0 Tail diameter 90mm (× 2) | F | 0.8 h | |
Rear under panel (for sports muffler installation) | All cars ※ 3 | MND2400 | ¥34,100 (¥ 31,000) | Piano black painted ABS resin drilling required | D | 0.5 h |
※ 1 Cannot be installed on vehicles equipped with MT i-ELOOP from ND5RC-300001.
※ 2 Cannot be installed separately. Sports muffler dual (NDA1 V5 800) and muffler garnish (NDA1 V3 910) must be installed at the same time.
※ 3 Cannot be installed separately.Sports muffler center dual (MND8Y60 / MND8Y50) and rear under panel (MND2400) must be installed at the same time.
Brake
The first thing that is required of a brake is the ability to stop safely.And in order to enjoy running freely, controllability that can decelerate at will is required.The brake pad, which has a small change in the coefficient of friction (μ) even during continuous braking, and the brace, which increases the rigidity of the pedal mounting part and eliminates the delay in effectiveness, realizes the effect of synchronizing with the driver's sensibility.>> Read more
■ Street sports brake pads
The aim is "deceleration at will".Designed with an emphasis on stable effectiveness during continuous braking, delicate load transfer in cornering, and flexible control of vehicle speed, rather than simply stopping performance.Focus on the amount of change and how to change the coefficient of friction (μ), which constantly changes depending on various conditions such as pedaling force, speed, and temperature.The "transient characteristics of μ" required by sports-oriented drivers realizes a taste that is synchronized with the sensibilities. >> More details
<Main specifications> ・ Non-asbestos friction material ・ Rotor proper temperature: 0 to 400 ℃
■ Club sports brake pads
Sometimes to the circuit ...A sports pad that aims for "deceleration at will" that synchronizes with the driver's sensibility in high load areas such as continuous corners and full braking from straight.The material is a blend of carbon and a metal material with excellent fade resistance.It balances the conflicting frictional force and the suppression of rotor aggression at a high level. >> More details
<Main specifications> ・ Graphite metal friction material ・ Rotor proper temperature: 50-800 ℃
■ Sports brake rotor
Two-piece structure with improved strength such as fade resistance and crack resistance.Specifications that pursue functions such as ventilation fins with excellent heat dissipation and cleaning slits that prepare the pad surface.The lightweight duralumin bell housing can also be expected to improve handling.When it is exhausted, only the disc rotor can be replaced. >> More details
<Main specifications> ・ 8 slits on one side, 2 piece type
■ Street brake rotor
Mass-produced XNUMX-piece structure with the same shape FC Cast iron, but with improved strength by controlling the content of carbon and silicon.Further heat treatment is applied to stabilize the metal connective tissue.It suppresses distortion due to heat and improves fade resistance and crack resistance. >> More details
<Main specifications> ・ 6 slits on one side, 1 piece type
■ Sports brake line
It uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and expansion due to hydraulic pressure compared to the rubber used in mass-produced vehicles, and maintains a direct brake feel according to the pedal effort.Faithfully reproduce the hose layout similar to mass production.It is designed with safety in mind, such as a PVC coating that protects the hose from flying stones.Includes gaskets required for installation. >> More details
<Main specifications> -Stainless steel mesh PTFE + PVC coating
■Master back brace
Focus on the rigidity of the unit from the brake pedal that converts pedaling force to hydraulic pressure to the master cylinder.The pedal mounting part, bulkhead / master back, and body on the engine room side are three-dimensionally reinforced with high-rigidity steel braces.By suppressing the distortion of the entire unit, the delay in reaction from when the pedal is pressed until the brake is applied is improved. Contribute to the realization of "deceleration at will". >> More details
<Main specifications> -Steel 5-piece configuration
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Codes | Reference work Time |
||
---|---|---|---|---|---|---|---|
Street sports Brake pad | front front rear | All cars (excluding cars with Brembo brakes) Vehicles with Brembo brakes All cars | MND5A10 MND5A11 MNC5A20 | ¥16,500 (¥ 15,000) ¥19,800 (¥ 18,000) ¥14,300 (¥ 13,000) | Non-asbestos rotor Appropriate temperature: 0-400 ℃ | D | 0.5 h |
Club sports Brake pad | front front rear | All cars (excluding cars with Brembo brakes) Vehicles with Brembo brakes All cars | MND5B10 MND5B11 MNC5B20 | ¥25,300 (¥ 23,000) ¥27,500 (¥ 25,000) ¥23,100 (¥ 21,000) | Graphite metal rotor Appropriate temperature: 50-800 ℃ | D | 0.5 h |
Sports brake rotor | front rear | NDERE/NDERC ND5RE/ND5RC (RS/NR-A and vehicles equipped with Brembo brakes) NDERE/NDERC ND5RE/ND5RC (RS/NR-A and vehicles equipped with Brembo brakes) | MND560R MND565R | ¥91,300 (¥ 83,000) ¥91,300 (¥ 83,000) | 2 piece type with cleaning slit Left and right 2 pieces set | F | 1.0 h |
Street brake rotor | front | NDERE/NDERC ND5RE/ND5RC (RS/NR-A and vehicles equipped with Brembo brakes) ND5RE/ND5RC (excluding RS/NR-A and vehicles equipped with Brembo brakes) | MND5A50 MDJ5A50 | ¥44,000 (¥ 40,000) ¥41,800 (¥ 38,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
Street brake rotor | rear | NDERE/NDERC ND5RE/ND5RC (RS/NR-A and vehicles equipped with Brembo brakes) ND5RE/ND5RC (excluding RS/NR-A and vehicles equipped with Brembo brakes) | MND5A56 MND5A55 | ¥41,800 (¥ 38,000) ¥40,700 (¥ 37,000) | 1 piece type with cleaning slit Left and right 2 pieces set | D | 1.0 h |
Sports brake line | All cars (excluding cars with Brembo brakes) Vehicles with Brembo brakes | MND5400 MND5410 | ¥40,700 (¥ 37,000) ¥42,900 (¥ 39,000) | Stainless mesh PTFE hose + PVC coating | D | 1.5 h | |
Master back brace | All cars | MND4950 | ¥26,400 (¥ 24,000) | Steel 5-piece configuration | D | 1.0 h |
Engine & Drivetrain
A group of parts that draws out the full potential of the engine and converts it into traction.A sports clutch set and flywheel that support a pleasant gear change.Limited slip differential, which allows you to actively enjoy the change in the posture of the car when cornering, has created transient characteristics that eliminate sudden movements as much as possible while enhancing the direct feeling with the car.
■ Sports oil filter
Fine sludge is removed by using a high-efficiency filter medium.By expanding the filtration area by about 5% compared to mass production, filtration efficiency is improved and pressure loss is reduced.Furthermore, by incorporating a powerful neodymium magnet, metal wear debris is captured without missing.It balances the functions required for oil filters at a high level.Dedicated to gasoline engine vehicles. >> More details
<Main specifications> ・ Built-in strong magnet ・ Filtration area expanded by about 5% compared to mass production
■ Sports clutch set
The facing material is a non-asbestos material that exhibits high mu in a wide temperature range.In combination with the Doug tile cast iron cover, which has a crimping force increased by about 30% compared to mass production, reliable torque transmission is possible.Although it requires some pedaling force for operation, it is a characteristic that is easy to handle in sports driving because the meet point at half-clutch is clear compared to mass production. >> More details
<Main specifications> -Mass production shape non-asbestos type
■ Sports flywheel
A specially designed product that moderately reduces the weight of mass-produced flywheels and reduces the moment of inertia by 28 to 37% each.The effect on operability is minimal, and it is possible to improve engine response.The decrease in durability, which is a concern due to weight reduction, is dealt with by using a fully machined chrome molybdenum steel material with excellent thermal stability. >> More details
■ Sports clutch line
Uses stainless mesh PTFE (Teflon), which has less deterioration due to heat and aging and less expansion due to hydraulic pressure than the rubber used in mass-produced vehicles.Contributes to a direct clutch feel.In addition, PVC coating is applied to protect the hose for safety. >> More details
<Main specifications> -Stainless steel mesh PTFE + PVC coating
■ Quick shifter
Pursuing a sense of moderation by eliminating leaf springs and urethane bushes that alleviate shift shocks installed in mass-produced products.Approximately 24% shorter stroke by changing the lever ratio.Achieves a direct and quick operation feeling that is typical of a sports car that is neither too heavy nor too light. In combination with the AutoExe shift knob, the shift stroke can be adjusted to suit the driver's taste. >> More details
<Main specifications> ・ 24% shorter stroke than mass production
■ Limited slip differential.
The mechanical (multi-plate clutch) limited slip differential that distributes and transmits effective traction to the left and right drive wheels when cornering or on slippery roads is based on the proven CUSCO company and is based on the proven AutoExe. The original setting was applied.The operating method is 1.5 Way.Compared to mass-produced products, the direct operation feel is attractive. >> More details
<Main specifications> -Mechanical 1.5way cam angle 35 °-Torque bias ratio: 4.0-6.0-Specified LSD oil is included.
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
---|---|---|---|---|---|---|
Sports oil filter | All cars | A00182 | ¥3,080 (¥ 2,800) | Built-in strong magnet Filtration area expanded by about 5% compared to mass production | D | 0.1 h |
Sports clutch set | NDERC- ~ 299999 MT car ND5RE/ND5RC MT car | MPE600S MND600S | ¥64,680 (¥ 58,800) ¥61,380 (¥ 55,800) | Crimping force: 7.85kN Mass production shape non-asbestos specifications Crimping force: 6.00kN Release bearing included Mass production shape Non-asbestos specifications | F | 3.5 h |
Sports flywheel | NDERE/NDERC-300001~ MT car NDERC- ~ 299999 MT car ND5RE/ND5RC MT car | MND6420 MND6410 MND6400 | ¥82,500 (¥ 75,000) ¥58,300 (¥ 53,000) ¥58,300 (¥ 53,000) | Moment of inertia 28% reduction compared to mass production Weight 5.5kg Moment of inertia 37% reduction compared to mass production Weight 4.8kg Moment of inertia 37% reduction compared to mass production Weight 5.0kg | D | 4.5 h 4.0 h 4.0 h |
Sports clutch line | NDERE/NDERC-300001~ MT car NDERC- ~ 299999 MT car ND5RE/ND5RC MT car | MND6520 MND6510 MND6500 | ¥11,000 (¥ 10,000) | Stainless mesh PTFE hose + PVC coating | D | 1.0 h |
Quick shifter | MT car | MND6700 | ¥38,500 (¥ 35,000) | 23% shorter stroke than mass production | F | 0.8 h |
Limited slip differential | NDERE/NDERC MT car ND5RE/ND5RC NR-A NDERE/NDERC AT car ND5RE/ND5RC MT vehicles (excluding NR-A) ND5RE/ND5RC AT car | MND6610 MND6630 MND6600 MND6620 | ¥140,800 (¥ 128,000) | Includes 1 can of designated LSD oil (1L) | F | 4.0 h |
Utility
In order to enjoy everyday driving, I want to pay attention not only to running but also to the texture and usability of the appearance.Please also pay attention to utility items with functionality not found in mass-produced cars, such as a side visor with a ventilation mechanism that tightens the style with a sporty aero form.
■ Oil filler cap
The oil filler cap has been changed from genuine resin to 52S aluminum, which is fully machined and full of craftsmanship.Brilliant red alumite processing is applied to give a mechanical and gorgeous accent to the engine room.The laser-engraved AutoExe logo is also a delicate impression. >> More details
<Main specifications> ・ 52S aluminum fully machined ・ Red alumite processing ・ Laser engraved with AutoExe logo
■ Oil level gauge grip
An item that replaces the resin grip of a mass-produced oil level gauge with aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.DIY installation is possible with the attached dedicated tool. Compatible with a wide range of vehicles equipped with the SKYACTIV engine. >> More details
<Main specifications> -Aluminum-Red alumite-With AutoExe logo-Includes a dedicated tool for mounting
■ Brake fluid cap
The resin mass-produced brake fluid tank cap has been upgraded to aluminum, which is full of craftsmanship.Red alumite processing and laser engraved AutoExe logo give the engine room a mechanical and gorgeous accent.Combined with an oil filler cap and level gauge grip with the same design, it accelerates the total coordination of the engine room. >> More details
<Main specifications> -Aluminum-Fully machined-Red alumite processing-Laser engraved AutoExe logo included
■ Fuel lid cover
Designed exclusively for vehicle models to be installed in mass-produced fuel lids.The product is made of ABS with a three-dimensional chrome-plated finish, and can be easily attached with double-sided tape.Gives a sporty and mechanical impression without breaking the character line of the vehicle.In addition, by combining it with the "fuel cap cover" that is attached to the separately sold mass-produced fuel cap, it is possible to enjoy a unified coordination around the fuel filler port. >> More details
<Main specifications> -Made of ABS-Chrome plating-With AutoExe logo-Double-sided tape adhesion
■ Fuel cap cover
An ABS cover that can be attached over a mass-produced fuel cap.The design with cap bolts on bright Exe Red gives a gorgeous impression to the fuel filler port. With AutoExe logo.Compatible with a wide range of current Mazda vehicles. >> More details
<Main specifications> ・ ABS red painted ・ With decorative cap bolt ・ With AutoExe logo ・ Double-sided tape attached ・ Fuel label / erroneous oil supply prevention reminder sticker included
■ Optima Battery
Synonymous with maintenance-free batteries, which boast a longer life than conventional open-type batteries.It is a completely sealed type that uses the original spiral cell technology, so there is no need to replenish the battery fluid.Provides a stable current even under high load.Can be installed without using additional adapters.>> More details
<Main specifications> -Maintenance-free type made by Optima Battery
■ Battery clamp
Playful in the engine room. Made of one-piece steel designed with the image of an AutoExe strut tower bar.The bright red color and logo plate have been faithfully reproduced.>> More details
<Main specifications> -Steel red paint-With AutoExe ornament
■ LED fog lamp kit
A roadster-specific design that can be mounted directly on the mass-produced front bumper.A 40-chip high-power LED is built into a compact 5 mm diameter lamp.Ensure visibility when driving in bad weather by irradiating with appropriate light.A smart installation is possible with an assembled package of control units, brackets, power harnesses, switches, etc.
<Main specifications> ・ Built-in 5-chip LED for mass production bumper installation ・ Diameter φ40 ・ With power harness / switch Luminous intensity: 4800cd (candela)
■ Aero sports wiper blade
An aero type wiper blade is used for the main body.By adding a deflector with fins, the arm joint is aero-formed.The wind pressure generated during driving is positively received and the wiper lift is suppressed.The blade rubber is evenly adhered to the glass surface to improve visibility when driving at high speeds in the rain. >> More details
<Main specifications> ・ Driver side: 450mm ・ Passenger seat side: 480mm ・ Twin rail type
■ Door handle cover & protector set
A carbon-like matte design that protects the fragile door handle and gives it a sporty look.Pursuing high-quality details and achieving a natural and unified fitting.A package for one unit is available, and the door handle and protector can be purchased separately. >> More details
<Main specifications> ・ Carbon tone ・ Weather resistant ABS cover x 2 ・ PVC protector x 2 ・ One set
■ Wheel nut set
Irregular heptagonal (heptagonal) small diameter type with an aluminum end cap with the AutoExe logo.The main body is made of high-strength black-painted chrome vanadium steel that does not easily loosen at high temperatures.The knurled red-colored aluminum end cap adds a subtle and sophisticated accent to your car's footwell.>> More details
<Main specifications> - Body: Made of chrome vanadium steel, black paint - Cap: Made of aluminum, red anodized + clear paint - AutoExe logo included - Irregular heptagon type, special adapter wrench included
■ Helical short antenna
A short type with a total length of 105 mm with a built-in high-sensitivity helical coil inside the antenna.A roadster-specific design that realizes a fitting with a sense of unity. With AutoExe logo.>> More details
<Main specifications> ・ Built-in helical coil ・ Overall length: 105mm Screw diameter: M5 × 0.8mm ・ AutoExe logo included
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
---|---|---|---|---|---|---|
Oil filler cap | All cars | A1400-03 | ¥6,380 (¥ 5,800) | One-touch type Aluminum red alumite with AutoExe logo | D | 0.1 h |
Oil level gauge grip | All cars ※ 1 | A1450-03 | ¥6,380 (¥ 5,800) | Aluminum red alumite with AutoExe logo Dedicated tool for mounting included | D | 0.2 h |
Brake fluid cap | All cars | A1900-03 | ¥7,480 (¥ 6,800) | Aluminum red alumite with AutoExe logo | D | 0.1 h |
Fuel lid cover | All cars | MND1610 | ¥11,000 (¥ 10,000) | ABS chrome plated AutoExe logo double-sided tape adhesive | D | 0.3 h |
Fuel cap cover | All cars | A1600-03A | ¥5,280 (¥ 4,800) | ABS red painted decorative cap with bolt AutoExe logo | D | 0.1 h |
Optima battery | Car with i-stop i-stop no car | A01310 A01300 | ¥53,900 (¥ 49,000) | Color: Yellow Top | F | 0.3 h |
Battery clamp | All cars | MND1700 | ¥7,480 (¥ 6,800) | Steel red paint with AutoExe logo | D | 0.1 h |
LED fog lamp kit | All cars | MND0195 | ¥66,000 (¥ 60,000) | Built-in 5-chip LED for mass production bumper mounting Diameter φ40 with power harness / switch | D | 1.0 h |
Aero sports wiper blade | All cars | MND0250 | ¥9,680 (¥ 8,800) | Equipped with a large wind deflector Water repellent glass compatible Front left and right set of 2 | D | 0.1 h |
Door handle cover & protector set | All cars | NDA1 V3 110 | ¥14,630 (¥ 13,300) | Carbon-like weatherproof ABS cover x 2 PVC protector x 2 XNUMX set | D | 0.5 h |
Wheel nut set | All cars | C9A1 V9 770 | ¥16,280 (¥ 14,800) | Includes a dedicated adapter wrench for mounting the Heptagon type with the AutoExe logo | D | 0.3 h |
Helical short antenna | All cars ※ 2 | MND1470 | ¥5,720 (¥ 5,200) | Built-in helical coil Overall length: 105mm Screw diameter: M5 x 0.8mm with AutoExe logo | E | 0.1 h |
※ 1 NDERC cannot be equipped with the tower brace set (MND4800) and oil level gauge grip (A1450-03) at the same time.
※ 2 Sensitivity may decrease depending on the reception conditions when listening to the radio.
Interior parts
In order to clearly convey the driver's intention to drive to the car, I would like to pay close attention to the texture and functionality of the cockpit interface.For the interior, we have prepared an airbag-compatible steering wheel that has a casual and sporty sensibility and a shift knob that pursues a stroke feeling during operation.I want you to enjoy the dialogue with the car.
■ Full bucket seat TYPE-A7
A full bucket type that firmly holds the driver even in a strong lateral G.The basic shell is made of high-rigidity FRP.The side support has an asymmetrical shape, making it a perfect fit in a tight ND room.The epidermis is a flame-retardant material with red stripes on a fearless black. It incorporates optimal functions for sports driving, such as a belt hole for 35- to XNUMX-point seat belts, a height that allows the hip position to be lowered by up to XNUMX mm, and a rear angle adjustment mechanism. >> More details
<Main specifications> -Made of FRP-Flame-retardant PVC skin-Black / Red stripe-With seat cushion-With AutoExe logo
■ Sports steering wheel
A red-colored center mark with a flat bottom shape ... An airbag-compatible product that uses high-quality nappa leather as the material for outstanding sportiness.The elliptical cross-section grip with dimple processing that is not too thick and easy to grip, and the dimple-processed leather and thumb grip that improve holdability are created with details to actively enjoy driving.>> More details
<Main specifications> -Made of nappa leather-SRS airbag system / steering switch compatible-Flat bottom shape
■ Carbon paddle shift lever
Made of high-quality real carbon that is mounted over the mass-produced steering shift switch.Improved operability by moderately increasing the size.The cockpit is made sporty by clarifying the response in sports driving. >> More details
<Main specifications> ・ With AutoExe logo ・ Double-sided tape adhesive type ・ All 4 pieces configuration ・ Overall length 100mm (upper + 25mm lower + 10mm extension compared to mass production)
■ Shift knob (spherical shape / genuine leather)
Made of genuine leather with a diameter of 51 mm with an emphasis on operability.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.AutoExe logo on the top.>> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
■ Shift knob (spherical shape / genuine leather)
Designed exclusively for straight AT vehicles, with a focus on the stroke feeling when the shift lock is released.The clean appearance and operability of mass-produced products without the unlock button are attractive.Push the upper end of the shift knob during operation.Shift the knob as it is.>> More details
<Main specifications> -For AT cars (straight type) -Made of genuine leather-Weight: 130g
■ Shift knob (genuine leather)
Small diameter size with a diameter of 42 mm.A shift knob that fits easily in the palm of your hand and can be gripped on either the top or the side.You can adjust the height according to your physique and taste.Two types of stitches, red stitch and black stitch, can be selected.AutoExe logo on the top. >> More details
<Main specifications> -For MT vehicles-Made of genuine leather-Screw size MT vehicles: M10 x 1.25-Weight: 190g
■Wide rear view mirror
Frameless type compatible with conventional NDERC and ND5RC. The blue-coated mirror has a viewing area that is 1.7 to 1.8 times wider than mass-produced products. The radius of curvature is 3000SR to reduce parallax with the side mirror. Contributes to comfortable driving with less eye movement. The smart fitting that doesn't feel like an afterthought is appealing. Two types are available, compatible with vehicles equipped with auto-dimming mirrors and manual dimming mirrors.>> More details
<Main specifications> - Blue chrome surface mirror - Approximately 1.7 to 1.8 times the viewing area compared to mass production - Radius of curvature 3000SR AutoExe logo included - Anti-vibration cushion included
■ Knee pad set
Designed exclusively for ND.Firmly supports both knees and suppresses changes in the driver's posture during sports driving.Supports accurate pedal work.The skin has a flocky coating finish that feels good to the touch.It is a left and right set of the driver's door side and the console side of the three-step height adjustment type (can also be purchased separately).In addition, it is possible to complete the ideal holding environment for the whole body by combining with a different set full bucket seat Type-A3. >> More details
<Main specifications> FRP flocky coating (flocked paint) finish Door side (3-step height adjustment type) Left and right console side set AutoExe logo plate included
■ Sports floor mat
A high-quality floor mat set with an impressive red x black gradation that gives the interior a gorgeous color.The material is a soft wool-like fabric made from special chemical fibers in a loop weave.The driver's side is equipped with a large heel pad made of hard fiber that supports accurate pedal work during sports driving, achieving both texture and drivability. >> More details
<Main specifications> ・High-grade wool-like material ・Equipped with a large heel pad (driver's side) ・With aluminum AutoExe logo plate (front left and right) ・One set
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work Time |
|
---|---|---|---|---|---|---|---|
Full bucket seat TYPE-A7 | driving seat | NDERC / ND5RC ※ 1 | MND1970-03 | ¥159,500 (¥ 145,000) | Made of FRP Flame Retardant PVC Skin Black / Red Stripe With Seat Cushion AutoExe Logo Escalate (Fatlas Styling) | F | - |
Full bucket seat TYPE-A7 | Passenger seat | NDERC / ND5RC ※ 1 | MND1980-03 | ¥170,500 (¥ 155,000) | FRP flame-retardant PVC skin black / red stripe with seat cushion / seating sensor ※ 2 Made of escalate with AutoExe logo | F | - |
Dedicated seat rail | driving seat Passenger seat | NDERC / ND5RC NDERC / ND5RC | MND1975 MND1985 | ¥42,900 (¥ 39,000) | With height / angle adjustable side bracket Mass production ratio Seat surface up to 35 mm down Full bucket seat TYPE A7 for mounting | F | 1.0 h |
Dedicated speaker relocation kit | Car with genuine headrest speaker ※ 2 | MND1990 | ¥17,600 (¥ 16,000) | Relocated pillow speaker with built-in genuine seat For full bucket seat TYPE A7 installation | F | 0.8 h | |
Sports steering wheel (Nappa leather) | Red stitch | All cars | MNZ1370-03 | ¥49,500 (¥ 45,000) | Nappa leather SRS airbag system / steering switch compatible flat bottom shape | D | 0.5 h |
Carbon paddle shift lever | Vehicles equipped with steering shift switch | A1382-20 | ¥16,280 (¥ 14,800) | Carbon 4-piece construction with AutoExe logo | D | 0.1 h | |
Shift knob(Spherical shape / genuine leather) | Red stitch | MT car AT car | A1341-03 A1350B-03 | ¥9,900 (¥ 9,000) ¥19,580 (¥ 17,800) | Screw diameter: M10 x 1.25 Diameter: 51mm Overall length: 70-88mm Adjustable weight: 190g Diameter: 51mm Overall length: 87mm Adjustable weight: 130g Push type | D D | 0.1 h 0.2 h |
Shift knob(Genuine Leather) | Red stitch Black stitch | MT car MT car | A1396-03 A1396-08 | ¥9,680 (¥ 8,800) | Screw diameter: M10 x 1.25 Diameter: 42mm Overall length: 73-91mm Adjustable weight: 190g | D | 0.1 h |
Wide rear view mirror | ND5RC Car equipped with manual anti-glare rearview mirror ※ 3 NDERC/ND5RC Vehicles equipped with auto-dimming rearview mirror ※ 3 | NDA1 V1 450 NDA2 V1 450 | ¥13,750 (¥ 12,500) | Blue chrome surface mirror Approximately 1.7 times the viewing area compared to mass production Radius of curvature 3000SR Anti-vibration cushion included | E | 0.1 h | |
knee pad set | All cars※ 4 | NDA1 V1 51X | ¥74,800 (¥ 68,000) | FRP flocky coating (flocking coating) finish Door side (3-step height adjustable) / console side left and right set AutoExe logo plate included | F | 1.0 h | |
Sports floor mat | All cars | NDA1 V0 320 | ¥46,200 (¥ 42,000) | High-quality wool-like material Equipped with a large heel pad (driver's side) With AutoExe logo plate Set of 1 for 2 car | F | 0.1 h |
※ 1 Dedicated seat rails (MND1975 / MND1985) are required for installation.In addition, the side airbag / seat heater does not work because it is not equipped (the product comes with a side airbag canceller). [Caution] Combinations other than the dedicated seat rail do not meet safety standards.
※ 2 9 speakers (BOSE) Car = driver / passenger seat 6 speakers = suitable for driver's seat.
※ 3 Due to the structure of the vehicle, vibrations may increase while driving compared to the genuine rearview mirror.
※ 4 Compatible with genuine seat, genuine RECARO seat, AutoExe full bucket seat TYPE-A7 equipped vehicle.
Goods
Real carbon and suede-like accessories that stand out sporty.Stickers and ornaments that decorate your styling.Please enjoy the coordination with your car in every detail with your sense.
■ Carbon number frame
Autoclave molded dry carbon license plate frame with dramatically improved material and design.UV cut clear coat finish that suppresses deterioration due to ultraviolet rays.A stainless steel AutoExe logo plate is placed in the center. >> More details
<Main specifications> -Autoclave molded dry carbon-UV cut clear coating finish-Stainless steel AutoExe logo plate included
■carbon number bolt
High quality number bolt set using dry carbon for the plate part. Dress up your license plate smartly with the 3-piece configuration of our unique low-head stainless steel bolt/carbon washer.>> More details
<Main specifications> - Made of CFRP (logo plate part: dry carbon) - UV cut clear coating finish - Stainless steel low head bolt - AutoExe logo included - Set of 1 for 3 car
■ Leather key holder
Just fit to the new advanced key.The outer skin is made of black cordovan, which has excellent durability.Soft red cowhide leather is used on the inside to gently wrap the smart key.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
<Main specifications> Cordovan (horse leather) Made of cowhide AutoExe/ASHFORD embossed logo
■ Fragment case
Old and new advanced keys/card type keys can be stored.Based on black cordovan, which has excellent durability, perforated leather with red permeation expresses a sporty feeling.With card storage case + key chain.Handmade specifications jointly planned with the pioneering system notebook brand "ASHFORD". >> More details
<Main specifications> Cordovan (horse leather), cow leather, AutoExe/ASHFORD embossed logo
■ Carbon key cover
Dedicated to the new advanced key.Autoclave manufacturing method used for racing car bodies, etc. Made of dry carbon.The texture that makes the most of the texture of the material is attractive. >> More details
<Main specifications> -Made of dry carbon-With AutoExe logo-2-piece configuration-Double-sided tape adhesive type
■ Key case
A high-quality black suede-like key case compatible with conventional advanced keys.A cover type that firmly protects the key body from scratches and impacts.Red stitching and red lines give a sporty and delicate impression. >> More details
<Main specifications> ・ Black suede tone ・ Red stitch ・ With AutoExe logo
■ Car verification case
High-quality black suede-like that smartly stores in-vehicle documents such as vehicle verification, instruction manuals, and maintenance notes.The red stitching, which is unified to the liner inside the case, also enhances the sports mind. >> More details
<Main specifications> -Black suede tone-Red stitch-AutoExe embossed logo-Size: 245 x 180 x 65 mm
■ Ornaments / stickers
You can enjoy it with your own taste.It is also good to dress up with the demo car as a model.
A lineup of high-quality AutoExe logo decorations that make you feel the commitment to driving. >> More details
Product name | 適合 車 種 | part number | Tax-included price (Price without tax) | Spec. | Codes | Reference work time | |
---|---|---|---|---|---|---|---|
Carbon number frame ※ 1 | For front license plate mounting | A1800-20 | ¥18,480 (¥ 16,800) | Made of CFRP (dry carbon) UV cut clear coating finish Comes with stainless steel AutoExe logo plate | D | 0.1 h | |
carbon number bolt | General-purpose products (excluding character light type license plates) | C9A1 V9 760 | ¥9,350 (¥ 8,500) | Made of CFRP (logo plate part: dry carbon) UV cut clear coating finish Stainless steel low head bolts with AutoExe logo Set of 1 for 3 car | D | 0.1 h | |
leather key holder | Vehicles equipped with the new advanced key ※ 2 | MAA0005 | ¥19,800 (¥ 18,000) | Made of cordovan (horse leather) and cowhide with AutoExe/ASHFORD embossed logo | F | - | |
fragment case | General-purpose products | MAA0006 | ¥14,850 (¥ 13,500) | Made of cordovan (horse leather) and cowhide with AutoExe/ASHFORD embossed logo Size: 150mm x 72mm x thickness 5-15mm | F | - | |
Carbon key cover | Vehicles equipped with the new advanced key ※ 2 | A2650-20 | ¥10,780 (¥ 9,800) | Made of CFRP (dry carbon) with AutoExe logo, 2-piece construction, double-sided tape adhesive type | D | - | |
key case | Vehicles equipped with advanced keys | A2640-33 | ¥4,180 (¥ 3,800) | Black suede-like red stitching with AutoExe logo.Size: 95mm x 45mm x 20mm | D | - | |
Car verification case | General-purpose products | A2810-33A | ¥7,480 (¥ 6,800) | Black suede-like red stitch with AutoExe logo Size: 245 x 180 x 65 mm | D | - | |
Bright ornament | General-purpose products | A12500 | ¥5,280 (¥ 4,800) | Chrome-plated ABS resin double-sided tape adhesive type Size 155mm x 20mm | D | - | |
ornament | General-purpose products | A12000 | ¥1,980 (¥ 1,800) | Aluminum double-sided tape adhesive type Size 120mm x 24mm | B | - | |
Message logo sticker | General-purpose products | A11900-03 | ¥880 (¥ 800) | One-touch transfer type Size 158mm x 28mm | B | - | |
Logo sticker (L) | General-purpose products | silver Red white | A11200-02 A11200-03 A11200-04 | ¥1,320 (¥ 1,200) | Character type without characters Size 550mm x 56mm | B | - |
Logo sticker (S) | General-purpose products | silver Red white | A11300-02 A11300-03 A11300-04 | ¥660 (¥ 600) | Character type without characters Size 270mm x 28mm | B | - |
※ 1 This product may appear on a part of the in-vehicle monitor screen such as a car equipped with a front camera.
※ 2 The leather key holder (MAA0005) and carbon key cover (A2650-20) cannot be installed at the same time.
Roadster (ND) Parts impression
We are posting the raw voice of the customer who is actually wearing it.
Please refer to the car personalization project.
A genuine mirror with no afterthoughts.
The direct feel to the accelerator has increased.
- Impressions by vehicle type
- Roadster
- Impressions by parts
- Intake and exhaust system
The amount of roll can be significantly reduced.
- Impressions by vehicle type
- Roadster
- Impressions by parts
- Suspension
Attached to increase volume.
- Impressions by vehicle type
- Roadster
- Impressions by parts
- ス タ イ リ ン グ
The feel and sense of unity is superb.
- Impressions by vehicle type
- Roadster
- Impressions by parts
- Interior,Suspension
The way the rotation drops is excellent.
- Impressions by vehicle type
- Roadster
- Impressions by parts
- Engine & drivetrain
Intake sound that makes you feel comfortable.
- Impressions by vehicle type
- Roadster
- Impressions by parts
- Intake and exhaust system
You can wear it without any worries.
- Impressions by vehicle type
- Roadster
- Impressions by parts
- ー ー テ ィ リ テ テ ー ー
Dress up around the rear.
- Impressions by vehicle type
- Roadster
- Impressions by parts
- ス タ イ リ ン グ