2022-06-07MAZDA3 / AxelaTunenori TAKECHI Very impressed with AutoExe.● Mounting parts: Strut tower bar, Floor cross bar, Fuel cap cover, Brake fluid cap, Battery clamp, Carbon paddle shift l […]
2022-05-27RoadsterTunenori TAKECHI Winding feels good.-Installation parts: Street sports suspension kit, sports stabilizer, strut tower bar-Street sports suspension kit The roll is moderately suppressed compared to the genuine one, and the winding is comfortable.The feeling of pushing up is as good as genuine […]
2022-05-25CX-8Tunenori TAKECHI I felt like a different car.-Installation parts: Lower arm bar I purchased and installed the lower arm bar that was also installed on the Biante that was in the previous car at the sports fair.Even with the CX-8, which originally has high rigidity, the torque (weight) when the steering wheel is turned changes compared to before mounting, and it is a different car […]
2022-05-23MAZDA3 / AxelaTunenori TAKECHI Improved turning performance.-Mounting parts: Torsion beam stiffener It was mounted with the aim of increasing the rigidity of the rear.It is a replacement from a genuine plate to a high-rigidity steel gusset.It is a part that is hard to experience, but my personal impression is that it has improved turning performance. * Hidden in the undercover [...]
2022-05-19RoadsterTunenori TAKECHI Just a feeling of on-the-rail!-Mounted parts: Tower brace set It has become interesting to bend freely.Is it that the steering response has improved?It came to bend sharply from the beginning of turning the steering wheel.Just a feeling of on-the-rail!Ride quality is all […]
2022-04-25MAZDA2 / DemioTunenori TAKECHI I just stare at it.● Installation parts: Front grille, sports damper, strut tower bar, etc. I feel that it was really good to use AutoExe's front grille.It has a spartan appearance, so you can easily see it in the parking lot.Damper, Tower Ba […]
2022-03-28CX-30Tunenori TAKECHI For a ride like a German car.-Mounted parts: Floor crossbar There is a sufficient sense of rigidity even in the normal state, but I was worried about the dull feeling when I started turning the steering and the feeling of rolling in the corners, so I decided to put in rigid parts.I also installed the strut tower bar first, and the front […]
2022-03-10MAZDA2 / DemioTunenori TAKECHI Turn as you intended! !!● Installation parts: Member brace set Consult with the dealer about what to do next.There are circumstances where it is difficult to lower the vehicle height, and as a result of various thoughts, if it is a member brace set, you can feel the sharpness of handling and it will not look flashy […]
2022-02-07MAZDA6/AtenzaTunenori TAKECHI Impressed by the effect beyond expectations.-Mounted parts: Motion control beam Since the steering wheel became considerably lighter after changing to MAZDA6, it was introduced to make it heavier.The moment I installed it, I immediately understood what kind of effect it had.The steering wheel, which was too light and unpleasant, is quite heavy […]
2022-02-02CX-3Tunenori TAKECHI The body is even more solid.● Installation parts: Floor crossbar The strut tower bar was installed last time, and the stability when going straight and entering the corner was outstandingly improved, but the rear is a little squeaky, so I installed the crossbar on the rear.It was troublesome to peel off the interior, but after installation, […]
2022-01-25MAZDA3 / AxelaTunenori TAKECHI It goes smoothly even after a shift change.● Installation parts: Floor crossbar I felt the effect of body reinforcement on the front car BJ Familia, so I installed it following the tower bar.I installed it myself by referring to the records of my predecessor, but it was easy to install by simply removing the rear seat.corner […]
2022-01-19MAZDA6/AtenzaTunenori TAKECHI The limit of S-shape has also risen, and the fun has increased.● Mounting parts: Center floor bar As for the body rigidity parts, the lower arm and floor crossbar are already installed in the rear, and then the strut tower bar is installed in the front.Still, the feeling of fluffiness in high-speed cornering around the rear and the feeling of anxiety of the car body in the high load range […]
2022-01-19RX-8Tunenori TAKECHI I feel a sense of stability around the front.-Mounted parts: Strut tower bar Since the genuine tower bar of the previous model RX-8 is a two-point type, I felt that the rigidity was a little insufficient when the suspension was solidified.So I chose Auto Exe's strut tower bar.Struts and bulk […]
2022-01-19CX-3Tunenori TAKECHI High-speed stability has also improved dramatically.● Installation parts: Strut tower bar, shift knob I installed the tower bar because I was dissatisfied with the stability at high speed because the front of the CX-3 felt light because it was also installed on the front car Atenza.Immediately the front is firmly rigid and stable from beginning to end […]
2022-01-07CX-8Tunenori TAKECHI Great impact when opening the hood.● Mounting parts: Strut tower bar Since it is originally tight, there is no big change, but it certainly seems to be working.However, there is no discomfort because it is not stiff.It looks like a plate, and it has a high-class feel. […]
2022-01-07MAZDA3 / AxelaTunenori TAKECHI My friends and family also noticed the change.● Mounting parts: Floor crossbar Since the front tower bar was installed at the front, I felt the rear twist and instability when turning around the corner.Therefore, we introduced a floor crossbar to balance the front and rear of the car body.Feel it until now […]
2022-01-07MAZDA3 / AxelaTunenori TAKECHI high quality item for my ride.● Mounting parts: Front under spoiler, front grille, sports steering wheel, strut tower bar, etc. Hi, I would like to participate for the AutoExe Mask r […]
2022-01-07MAZDA3 / AxelaTunenori TAKECHI Easy to drive on highways and bypasses.● Installation parts: Strut tower bar I was worried about the feeling that the car body would twist at intersections and cornering, so I installed the tower bar.As a result, it becomes possible to turn without stress due to the tension, and the play of the steering is reduced and it is heavy and heavy […]
2022-01-07MAZDA2 / DemioTunenori TAKECHI Satisfied with improved steering feeling.● Mounting parts: Tower brace set Originally, I felt that the rigidity around the front was high, but I chose the tower brace set in order to improve the rigidity around the rear.It feels like the rear moves behind the front when steering, which I felt before mounting […]
2022-01-04CX-30Tunenori TAKECHI It's cool just because it's attached.● Mounting parts: Carbon paddle shift lever, lower arm bar, floor cross bar, etc. The photo shows only the carbon paddle shift lever and lower arm bar.I bought the carbon paddle shift lever just by looking at it.I don't usually use it at all, with […]
2022-01-04RoadsterTunenori TAKECHI It works well.-Mounted parts: Floor crossbar Since the Roadster does not have a roof, I felt that the rigidity was insufficient at the corners compared to the FD3S I was riding in front, and it seemed to move a little later after turning the steering, but after attaching the floor crossbar The moment you turn the steering […]