KF-06

My SUV is a sports car.
KF-06 puts new driving will power into CX-5.

“I want to drive my SUV just like a sports car”…For drivers seeking a fresh maneuvering sensation, AutoExe always has been making the best total tuning for every single version of CX-5 in its history. KF06, the second version of KF type CX-5 tuning advances itself to the Development Code of 06 generation tailored to the times and the environment, representing the theme of our own “sensitivity tuning”.

“A New Driving Sensation” magnifies the pleasures of driving which one cannot expect from mass-produced vehicles. The symbol of the new styling kit is Markless Grill, which we have been so meticulous about for every model in history, expressing outstanding strength. Blackout coated front under & rear roof spoiler and grill, together with the sports muffler with a tail of 2 on the left and 2 on the right, perfect the body shape. It is clearly different from ordinary CX – 5, expressing its driving will.

The functional system features “Sports Damper”. Damping force is instantly kicked in from a very low speed region at the moment the suspension starts reacting. At the same time, it drastically strengthens the damping force on the rebound side. Through these, you will never lose control over the steering wheel on the winding road. On the other hand,   harshness generated by the road surface is reduced by controlling the damping force of the compression side at the same level as the mass production specification. Combination with the mass produced spring does not raise car height, so you can immerse yourself with a driving pleasure without a feeling of height which an SUV tends to have. In addition, body reinforcement parts, which have a strong upper and lower double structure, support comfortable driving. The intake and exhaust systems achieve an efficiency increase by a moderate reduction in resistance. Riding is evolved, being capable of responding to the sensibility of the driver, such as that the brake acts as to synchronize exactly with the driver’s intention. Your CX – 5 is taken to the level that is the domain of sports beyond the conception of SUV.

Styling Kit


previous arrow
next arrow
PlayPause
previous arrownext arrow
Slider

■KF-06 Styling Kit for CX-5(KF)
DescriptionModelPart NumberPriceSpecificationCode
Front Under SpoilerAllMKG2100-08¥78,000Fiberglass,Painted(Piano Black)D
Front Grille360°View Monitor model ※1

Non 360°View Monitor model ※1
MKF2500

MKG2500
¥62,000

¥62,000
ABS,Painted(Piano Black/Mat Black)D
Sports MufflerDiesel※2MKF8Y70¥115,000Stainless steel Main pipeφ60.5 Tipφ90x4
Muffler GarnishDiesel※2MKF2410¥28,000AES,Unnecessary paint. Exclusive for MKF8Y70D
Rear Roof SpoilerAll

All
MKF2600-08

MKF2600
¥78,000

¥42,000
Fiberglass,Painted(Piano Black)

Fiberglass,unpainted
D
※1 Adapt to Mazda Radar Cruise Control (MRCC/SBS) .
※2 When installing this Muffler,Muffler garnish(Parts Number:MKF2410)is required.

KF-05S

Full bumper type is the fruit of our pursuit of original styling. The trapezoid grill which provides a markless face and millimeter wave radar function compatible with each other, and horizontal type bumper duct with blackout coating create a wide front view with a sense of stability. The rear dual center type muffler and the rear roof spoiler complete the fearless appearance of the rear view.

Styling Kit


previous arrow
next arrow
PlayPause
previous arrownext arrow
Slider

 

※The product does not guarantee the performance of Rader Cruise Control System(SBS/MRCC)


■KF-05S Styling Kit for CX-5(KF)
DescriptionModelPart NumberPriceSpecificationCode
Front Bumper&GrilleAllMKF2F00¥98,000Fiberglass(Grille=PP),unpainted※2D
Premium Tail Muffler
(Center Dual)
Diesel ※1

Petrol ※1
MKF8Y50

MKF8Y60
¥78,000

¥106,000
Stainless steel Main pipeφ60.5 Tip110x95mmx2D
Rear Under PanelAll ※1MKF2400¥38,000Fiberglass,unpainted Exclusive for MKF8Y50/8Y60D
Rear Roof SpoilerAllMKF2600¥42,000Fiberglass,unpaintedD
※1 When installing this Muffler,Rear Under Panel(Parts Number:MKF2400)is required.
※2Adapt to Mazda Radar Cruise Control (MRCC/SBS) .Except 360°View monitor model.


Functional Parts

▶Suspension Parts

“A New Driving Sensation” – Suspension is the core of full running sports sensation.Our aim is handling at will, beyond the boundaries of mass-produced vehicles. For drivers who want to actively enjoy driving, not only the matter of simply stiff or soft feeling, but to be provided the best street driving specification which has refined the dynamic sensitivity performance such as the initial responsiveness at the time of steering and the transient characteristic of rolling.

Parts lineup

Low Down Spring

The roll is placed under control by the spring rate intensified within the range that has less impact on a ride quality, so that the vehicle height can be brought down by approx. 30 mm.  For the riding taste, the car stability is improved by bringing its center of gravity down, which provides a desired tendency to the “person who enjoys driving.”  Moreover, the clearance of tire house becomes reduced, which makes the whole car look low.  As a result, a dynamic feeling is provided to the styling.
Photo Gallery

■Street Sports SUS. Kit
The best street model anyone could ever think of for AutoExe. Based on dynamic sensitivity engineering, twin tube damper quickly initiates damping force at a very low speed region and controls the rolling response. Vehicle height is set for a 15 mm standard which realizes linear handling without impairing riding comfort.

Adjustable Stabilizer Link
The length of the stabilizer link is designed with using the factory standard car as a guideline.  Due to this, when lowering the car height, at which time the angle of the lower arm changes, there is a tendency for arm angle of the link and stabilizer becomes more acute than the appropriate value, which spoils the true stabilizer effect.  The Adjustable Stabilizer Link is an item which allows the true stabilizer functionality to shine through by adjusting the link length when lowering down, so that the arm angle of the stabilizer is kept at the appropriate setting.

Sports Stabilizer
The spring rate increased by the pipe diameter greater than that of the standard car reduces the roll at the comer.  It is not supposed to work as a spring when the right and the left tires go up and down simultaneously during straight-ahead driving, etc.  Therefore, worsening of ride quality is minimized.

Sports Tie Rod End
Tie rods, which connect the steer wheels to the left and right front wheel knuckles in changing the direction of tires, are typically designed based on a standard car height. With lower height cars, however, the angle of the tie rods can differ and induce bump steering. “Sport tie rod ends” are an item that restores the original steering characteristics of a vehicle by making tie rod angle adjustable if the car height is lowered.
Photo Gallery

Description ModelPart NumberPriceSpecificationCode
Low Down SpringDiesel/Petrol Turbo 2WD

Diesel/Petrol Turbo 4WD

Petrol NA 2WD

Petrol NA 4WD
MKF7000


MKF7100


MKF7200

MKF7300
¥40,000Ride-height -30mm D
Sports DamperAll ※1MKF7700¥72,000Replacement typeD
Street Sports SUS. KitDiesel/Petrol2.5L ※1MKF7850¥168,000Overall length ride-height adjustable D
Adjustable Stabilizer LinkFront

Rear
All

All
MKE7605

MKE7655
¥22,000

¥20,000
Overall length adjustable Right and left setD
Sports StabilizerFrontAllMGJ7600¥25,000Solidφ24.0D
Sports StabilizerRearVIN‐300001~2WD

VIN‐~299999 2WD

4WD
MBM7650

MKE7650

MKE7660
¥23,000

¥23,000
Solidφ18.0

Solidφ19.0

Solidφ20.0
D
Sports Tie Rod EndAllMKF7A00¥20,000Forged steel Right and left setD
※1 When installing VIN‐300001~model,Some Mazda genuine parts are required.Please inquire for details.

Body Parts

In order to increase the sense of unity between the driver and the car, tuning to train the body is fundamental. By decreasing the slight distortion of each part of the body generated by, for example, the force on the road surface while turning a corner, the motion of the initial operation of the suspension which was absorbed by the distortion is pulled out, enhancing handling with a sense of direct reaction from the moment you turn the steering wheel with no delay.

Parts lineup

Strut Tower Bar
It is a welded one-piece type with cylindrical rib that binds together the upper sections of the right and the left suspensions tightly with the strong steel pipe and plate.  It reduces the distortion of the body applied from the suspension to ensure the movement of the suspension.  As a result, it creates a zippy feeling of driving a car.  All the more because it is part of the basic item, we stick to the function-oriented stance.

Center Floor Bar
Center Floor Bar is an auto body reinforcement part that enhances rigidity, by uniting the width of internal floor parts with high rigidity steel pipe. It is strengthened by the welded one piece structure, of the floor part and the center tunnel part. It improves steering performance by restraining distortion in the monocoque center parts where strut tower bar or floor cross bar do not work. Center Floor Bar can be applied to layout with the genuine floor mat, for rear legroom.
*Center Floor Bar can be applied to the genuine floor mat.
Photo Gallery

Floor Cross Bar
It is a newly conceived reinforcement part that reinforces the floor by binding the right and the left sides of the rear floor with a steel pipe.  It produces the effect close to the tower bar without almost sacrificing the ease of use of the luggage room.  It concurrently uses the high-intensity bolt, etc. of the seat for installation, and won’t cause any annoying burden on the body, either.  We particularly recommend that it be installed together with the front strut tower bar.

Lower Arm Bar (Front)
It uses the steel pipe to reinforce the right and the left bases of the lower part of the front suspension that greatly affect the steering.  Reducing the opening of the section where the suspension is attached to control the alignment change, it increases the secured sense of steering.

Lower Arm Bar (Rear)
It uses the steel pipe to reinforce the right and the left bases of the lower part of the front suspension that greatly affect the steering.  Reducing the opening of the section where the suspension is attached to control the alignment change, it increases the secured sense of steering.

Tower Brace Set
It is an authentic part that has evolved the basic concept of strut tower bar more spatially while inheriting it.  Based on the oval shaft made of steel, it adopts the dedicated layout by vehicle type such as two way stress distribution structure and surface pressure distribution structure intended to avoid the stress concentration on the mount point.  As a result, it secures the unprecedented high rigidity as the bolt-on part.  Front and rear make a set.

Member Brace Set
The whole open-structured floor such as the center tunnel and the lower part of fuel tank is thoroughly reinforced by the trussed frame that combines the tenacious steel pipe and gusset.  It reduces the vibration and the kink of the floor to allow proper function of the front and the rear suspensions.  When used in combination with the tower brace set, the upper/down two-stage high-rigidity body is completed.  Front and rear make a set.

Motion Control Beam
Reinforces the front and rear ends of the body, greatly improving the rigidity of the monocoque. By installing a friction type damper which has improved high rigidity, the beams suppress micro vibration of the body and create the best ride on the street with strength and flexibility. It is recommended to use with body reinforcement parts such as strut bars. A set of two beams for front and Rear. Equipped with fixed BKT.
Description ModelPart NumberPriceSpecificationCode
Strut Tower Bar FrontAllMKF4000¥24,000Steel 1-piece 2-point D
Center Floor BarAllMKE4D00¥28,000Steel 1-piece 4-pointD
Floor Cross Bar RearAllMKF4500¥20,000Steel 1-piece 3-pointD
Lower Arm BarFront

Rear
AllMKE460

MKF4400
¥12,000

¥12,000
Steel 1-piece 2-pointD
Tower Brace SetAllMKF4800¥60,000Steel 4-piece Front and Rear set D
Member Brace Set2WD

4WD
MKF4700

MKF4710
¥62,000

¥62,000
Steel 6-piece Front and Rear set D
Mortion Control BeamAllMKF4900¥88,000Friction type damper Front and Rear setE

Intake & Exhaust Parts

For intake / exhaust tuning which has a direct impact on comfortable driving, improvement of peak power has no significance, but the reaction to instantly transmit the driver’s intention to the car.  Accelerator response is improved based on the air filter and the muffler with moderately reduced resistance. A discreet sports sound deepens communication between the driver and the car.

Parts lineup

Air Filter Replacement
Used to replace the filter components but which allow utilization of the original air cleaner box. Dry nonwoven fabric that does not affect air flow sensors is used for the filter material. The specifications provide a good balance of ventilation performance and dust filtering. In addition, stainless mesh, which is not available with the original products, reduces any deformation of the filter medium at high engine speeds, while also easily and effectively improving accelerator response. Its disposable design also makes it easy to maintain.

Sports Induction Box
Only the part of the genuine air cleaner cover that is of air intake resistance gets removed. Air intake efficiency is then improved by using the induction box with a genuine air cleaner element. The product sucks in fresh air and is comprised of an aluminum baffle plate that provides a thermal protection from the engine room and a funnel type FRP frame mounted in front of the filter. Efficiency can be further enhanced by combining it with an optional air cleaner. The sporty engine sound that results from removing the air cleaner cover also heightens its appeal.

Ram Air Intake System
It is structured to take in more fresh air as the car runs more distance with the air intake directed forward the car.  Fresh air is not only efficiently taken in through the dedicated efficient filter, but also the insulation-efficiency and high-grade carbon is used in the main body.  Therefore, it produces the effect close to an incensement of engine displacement.  The sound of air taken in that you can hear even inside the car is comfortable, and your feelings of driving also run high.

■Fresh Air Guide
Directly catches the wind coming in from the front of the car, supporting improvement in suction efficiency. In mass-produced vehicles, there is no specific air intake path between front grill and air inlet, but the dedicated air duct connects them directly. This system minimizes the influence of waste heat flows out of the radiator, etc. and intakes fresh air into the air cleaner box.[/accordionbutton]

Intake Suction Kit
The flexible joint of mass produced intake hose, whose top priority is reliability, is dispensed, but the intake resistance is reduced by the design to maximize the effective flow area available. The materials of the hoses that have been specially designed for each engine are multi-layer polyester silicon or FRP which can provide excellent deformation control by intake negative pressure. As a result, acceleration response is improved. The engine compartment now comes accented in red.

■Sports Muffler
True circle of φ 90. With a combination of dual tail with 2 on left and 2 on right, and an exclusive muffler garnish, rear view appears fearless. Silencer with straight structure is introduced into this design.  Resonators installed in the middle of the pipe interfere with, and eliminate, sound waves, reducing unpleasant, low frequency (muffled sound). Acceleration response is improved and, at the same time, exhaust note sounds clearer than ever.

※ It is necessary to install with the muffler garnish simultaneously.
Photo Gallery

■Muffler Garnish
Muffler garnish dedicated to sports muffler. Black satin finish specification makes it unnecessary to paint. A part of the mass production bumper is cut and reproduced, and it is installed simultaneously with the muffler. It creates a shape with a full sense of unity.  Single item cannot be installed.
Photo Gallery

Premium Tail Muffler
Profound feeling with sophistication is the fascination of this series. An oval shaped tail end of 110X95 mm is exactly what is needed for a refined touch. The gentle sport sound that is controlled and muffled for driver and passengers, and improvement of accelerator response within a practical range, are coexistent with the large-capacity, straight-through silencer, in which a slightly smaller main pipe and inner structure are carefully tuned.

Premium Tail Muffler(Center dual)Using stainless steel, 110 x 95 mm, oval shaped, two tail ends are installed at the center. The silencer is a straight structure item. By installing together with the dedicated rear under panel, the rear styling is completed with a sense of specialty.

※Single item cannot be installed.

Exhaust Chamber Kit
An intermediate exhaust pipe kit with a new feel provided by a built-in chamber mechanism wherein the speed of the exhaust flow is increased because of the exhaust effect. The efficiency of the exhaust is increased by ensuring the chamber layouts are in accordance to the engine capacity after optimizing the main pipe diameter. There is no need to worry about any increase in exhaust noise as the genuine sub-silencer is utilized. Can be considered an upgrade to the AutoExe muffler.

Exhaust Finisher
Our exhaust finisher can be bolted on to the tail end of the genuine muffler but has a dedicated design for each model car. The oval shape with a thick and beautiful curve recasts the image of existing muffler cutters, realizing a sense of a perfect fit that general parts never attain. This exhaust finisher is perfect for any users wishing to add some spice to their machines without detracting from the specs of the genuine muffler. AutoExe logoed.
DescriptionModelPart NumberPriceSpecificationCode
Air Filter ReplacementDiesel/Petrol Turbo

Petrol NA
MKE9A00

MBL9A10
¥6,500Dry type ReplacementD
Sports Induction BoxDiesel VIN-200001~/Petrol Turbo

Diesel VIN-~199999

Petrol NA
MKG957


MKE957

MGJ957A
¥29,000


¥29,000

¥28,000
Fiberglass filter frame+Aluminum air guideD
Sports Induction Box
with Filter
Diesel VIN-200001~/Petrol Turbo

Diesel VIN-~199999

Petrol NA
MKG957X


MKE957X

MGJ957XA
¥35,000


¥35,000

¥34,000
Fiberglass filter frame+Aluminum air guide+K&N air filterD
Ram Air Intake SystemDiesel VIN-200001~

Diesel VIN-~199999

Petrol Turbo

Petrol2.5L NA

Petrol2.0L
MKG9590

MKE9590

MKG9580

MKF9590

MKF9580
¥108,000

¥108,000

¥108,000

¥85,000

¥85,000
Exclucive Wet type air filter+Carbon intake box E
Fresh Air GuideAllMKF9B00¥28,000Fiberglass 2-piece structureD
Intake Suction kitDiesel

Petrol Turbo

Petrol2.5L NA

Petrol2.0L
MKE961

MKF9610

MGJ961

MBM961
¥24,000

¥18,000

¥16,000

¥16,000
Fiberglass main pipe+Silicon 3layer structure hose

Silicon layer structure hose

Silicon layer structure hose

Silicon layer structure hose
D
Sports MufflerDiesel ※1MKF8Y70¥115,000Stainless steel Main pipeφ60.5 Tipφ90x4D
Premium Tail MufflerDiesel

Petrol NA
MKF8Y00

MKF8Y10A
¥78,000

¥102,000
Stainless steel Main pipeφ60.5 Tip110x95mmx2D
Premium Tail Muffler
(Center Dual)
Diesel ※2

Petrol NA ※2
MKF8Y50

MKF8Y60
¥78,000

¥106,000
Stainless steel Main pipeφ60.5 Tip110x95mmx2D
Exhaust chamber KitDiesel 2WD

Diesel 4WD
MKF8400

MKF8410
¥62,000Stainless steel Main pipeφ60.5 Tip110x95mmx2D
Exhaust FinisherAll MGH8A00¥22,000Stainless steel Tipφ95x80(2pcs)D
※1 When installing this Muffler,Muffler Garnish(Parts Number:MKF2410)is required.
※2 When installing this Muffler,Rear Under Panel(Parts Number:MKF2400)is required.

Brake Parts

The cardinal point of the brake is to stop the car safely. The secondary expected function of the brake is easy control for the driver to freely reduce the speed of the car so as to enjoy driving as one wishes. As for sequential braking, it performs so as to synchronize the sensitivity of the driver using the brace for which delay reaction of braking can be solved by strengthening the rigidity of the mounting section for the pedal and the brake pads with a small change in the coefficient of function.

Parts lineup

Street Sports Brake Pad
“Deceleration of at will”, it is our goal. Not just for the performance in stopping, the design focuses on the stable effectiveness at the time of continuous braking, meticulous load shifting while cornering, giving very flexible control of the vehicle speed. On the assumption of driving on the road, the coefficient of friction (μ) is constantly changing depending on the conditions such as breaking actions, speed of the vehicle, and temperature, etc. The variation of such changes and how it changes became our interests. Sport-oriented drivers’ sweetheart, “transient property of μ”, generates spice which synchronizes the sensibilities.

Street Brake Rotor
Street brake Rotor has the same one piece structure as the mass produced rotors.
Content of carbon and silicon have been changed to strengthen the component.
Moreover, metallic bond formation is stabilized by a thorough heat treatment process, which is abbreviated in mass produced rotors. This results in restraining heat distortion, and improves fade resistance. Other remarkable features are as follows: function to let out fade gas generated from heated brake pad, or cleaning slit that planes the surface of carbonized brake pad and enhances brake operation.

Brake Pedal Brace
Brake Pedal Brace has been developed with the same concept as the Mastervac Brace. It is a component of the FF/4WD models that have no space for bracing in the engine compartment. It reinforces the bracket of the brake pedal parts from all angles and maintains its rigidity, where slight distortion occurs in braking operations. This improves the time required between pedaling and brake operating, contributing to the feel of brake operating instantly.
Description ModelPart NumberPriceSpecificationCode
Street Sports Brake PadFront

Rear
All

All
MKE5A10

MKE5A21
¥15,000

¥13,000
Asbestos-freeD
Street Brake RotorFront

Rear
All

All
MGJ5A50

MKE5A55
¥39,000

¥38,000
With cleaning slit,Replacement type D
Brake Pedal BraceATMGJ4950¥18,000Steel 2-pieceD

Utlity Parts

The surface texture and the usability have been given great attention in order to enjoy pleasant, everyday driving in addition to well behaved running. Enjoy the utility items, namely side visor with ventilation system which improves the style with sporty aeroform and the bonnet damper supporting opening / closing of the bonnet, equipped with superb functionality which is not found in mass-produced cars.

Parts lineup

Oil Filler Cap
The mass produced, resin oil filler cap is replaced with machined 52S aluminum, adding a touch of craftsmanship. Bright red, anodized processing accentuates a glamorous mechanical flavor to the engine compartment. Laser engraved AutoExe logo expresses a sophisticated look. Two lineups of one-touch type and screw type can handle a wide range of old and new Mazda cars.

Oil Level Gauge Grip
The resin grip of mass produced oil level gauges is replaced with an aluminum grip. Laser engraved AutoExe logo with red anodic oxydation coating offers a stylish look to the engine compartment. DIY installation is available by using the exclusive tools which come with the kit. Total coordination by installing the elaborately designed oil filler cap is recommended.

Battery Clamp
Now the engine compartment comes in accented red, which supplements a playful taste. Made of one piece steel with the design of an AutoExe strut bar in mind. Everything has been faithfully reproduced, even the logo plate of the bar.

■Fuel Cap Cover
Cumbersome self refueling will turn out to be a fun time to interact with your car. ABS cover which is installed by covering mass-produced fuel caps. The design of the cap bolt arranged with a vivid red color gives a gorgeous impression to the fuel filler opening. Engraved with AutoExe logo. The fuel cap cover is extensively compatible with the current Mazda cars. Using double-sided tape  A caution label indicating the specified fuel for the car is attached.

■Aero Wiper Deflector Set
The large wind deflector attached to the stock wiper arms. The wind pressure generated while driving is actively received in the blade and suppress lifting of the wiper. The blade rubber evenly adheres to the glass surface, improving visibility during high speed driving in the rain. Equipped with stainless steel AutoExe ornaments.

Bonnet Damper
High pressure gas damper assist makes opening and closing the bonnet even easier and smoother. The conventional lock stay is also no longer required, thus significantly improving the maintainability of the engine room. Special mount brackets for minimizing the load on the connecting parts, bonnet, and frame enable simple bolt-on installation with no holes being necessary.

Sports Side Visor
Effective ventilation system High performance side visor with ventilation function, in addition to the effective rain proof and shade. When opening windows, indoor air is pushed out using the negative pressure generated while driving. It’s also very effective to prevent rain from coming in. The rubber blade, equipped with a visor, controls a whirlpool of air, which is discharged. It prevents backward flow into the inside of the car. Aeroform in pursuit of higher performance also adds a dressy appearance to the car. Smoke type/acrylic resin.

Wheel Nut Set
It is a fashionable small-diameter wheel nut that places the aluminum end cap with a logo of AutoExe on the top.  The design of oddly shaped heptagon intended to use the dedicated adaptor wrench for attachment is adopted to allow the combined ue that protects the wheel from theft, too.  The high-strength chrome-vanadium steel that resists loosening under high temperature is adopted as a raw material so that the durability and the reduced diameter can go hand in hand
M12XP1.5 L:32mm.

 

DescriptionModelPart NumberPriceSpecificationCode
Oil Filler CapAllA1400-03¥5,800One touch type Anodized aluminumD
Oil Level Gauge GripDiesel/Petrol NA

Petrol Turbo
A1450-03


A1451-03
¥5,800Anodized aluminumD
Battery ClampAllA1700¥6,800Steel 1-piece D
Fuel Cap CoverAllA1600-03¥4,800ABS,Painted(Red)D
Aero Wiper Deflector SetAllMKF0240¥5,800Wind deflector Right and left setD
Bonnet DamperAllMKF2960¥20,000High pressure gas dampers+mount bracketsD
Sports Side VisorAllMKF0400¥21,500Acrylic resin With ventilated 4pcsD
Wheel Nut SetAllA00100B¥12,800Chrome-vanadium steel +Aluminum end capD

Interior Parts

In order to clearly transmit the intention of the driver to the car, the texture and the functionality of the cockpit are meticulously designed. For the interior, we have a steering wheel with a built-in airbag and a casually pleasing sport sensibility; and we have focused on a shift knob, the operation of which provides a tangible feeling. Please enjoy exchanging intimate dialogue with your car.

Parts lineup

Sports Steering Wheel
It has a sporty flat bottom shape. Pursuit of details created the steering wheel with an oval shaped section which provides easy handling, as well as the thumb grip which controls slipping. The diameter of the wheel is 370 mm* which is the same as the standard for mass produced cars, as a result of valuing operability and visibility.

■Carbon Paddle Shift Lever
High-grade real carbon material to cover the mass-produced steering shift switch. Improved operability from moderate upsizing. The lever provides confidence in sports driving, and tailors the cockpit for a sporty look. Engraved with AutoExe logo. Double-sided tape type. Four pieces assembled.
・Supports standard equipment / genuine optional steering shift switch.
・Overall length 100 mm (mass production ratio, upper + 25 mm and lower + 10 mm extension)

■Shift Knob (Leather/Ball Shape)  Designed for A/T models.
A round shaped knob designed exclusively for the latest Mazda AT models with straight type gear. It is a press-to-use knob and designed with care to be comfortable even when unlocking the shift lock. Genuine leather/red stitches. AutoExe logo marked.
Photo Gallery

Description ModelPart NumberPriceSpecificationCode
Sports Steering Wheel
(Leather)
Red stitchAllMBB1370-03¥38,000D-shape φ370mm Real Leather D
Carbon Paddle Shift Lever Steering Shift Switch ModelA1382-20¥14,800Carbon 4-pieceD
Shift Knob
(Leather/Ball shape)
Red stitchM/T

A/T
A1341-03

A1340-03
¥9,000

¥14,800
Genuine leather Screw pitch:M10X1.25

Genuine leather Push type
D
Shift Knob(Leather)Red stitch

Black stitch
M/T

M/T
A1396-03

A1396-08
¥8,800

¥8,800
Genuine leather Screw pitch:M10X1.25D